 |
|
||||
| |||||
|
||||||
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
(#1)
|
|
|||
Install the N55 BMW WMI Kit on an F87 -
01-17-2022, 12:02 PM
Hey guys, I am having some trouble determining the wiring configuration on the BMS WMI kit I got for my 2017 BMW M2. I have the PDF that walks through some of the connections, but these are not very clear....they start from an N54 install and move back and forth between that and the N55 connections. It's just not a very good document to walk someone through the process.
I've searched Google, YouTube, BMS and no one has any How-To's on this install for the N55. Does anyone have a soup-to-nuts setup they've done showing the completed wiring for the solenoid, FSB, and JB4 integration? Any help would be great! 
|
|
(#2)
|
|
|||
|
01-17-2022, 12:30 PM
Have you looked at this PDF yet?
https://www.n54tech.com/instructions/ww_kit_install.pdf Home of the JB4 the worlds most popular turbocharged tuning system! It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
|
(#3)
|
|
|||
|
01-17-2022, 12:50 PM
Yes, I have. That's the same PDF I referred to the in message. Pictures are worth a 1000 words - especially in this case.
 Talking through what wires go where just doesn't work well for an install like this. That's why I was hoping someone out there had a few pics or a video of how they installed it on an F87.
|
|
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
Linear Mode
|
|
Copyright © 2007 - 2022, JB4tech.com