N54Tech.com - International Turbo Racing Discussion
(#1)
Old
DLSJ5 DLSJ5 is offline
Junior Member
 
Posts: 120
Join Date: Jan 2008
Car: E92 M3
Default Shift-S3ctor 10/22-23/16 Results and Vids - 10-24-2016, 05:18 PM

Had a blast at Shift-S3ctor this weekend, ran both Saturday and Sunday at their 1/2 mile airstrip attack. The event went smooth, great SS3 crew as always, and a ton of of awesome cars and people. I met a few new faces, got plenty of runs, and I believe I set the new record for a 1/2 mile trap on a stock turbo S55, @ 157.34. My JB4 and Meth 100%, Dual CM7 Nozzles, Map 8, ZCP M4 ran flawless and it did extremely well against some potent cars, big thanks to Terry and BMS, they've been great to deal with and their products deliver!



It was around mid 80's temp wise, so in cooler weather it may trap a bit higher. I ran with 305/35/20 Nitto NT555R Drag Radials, they helped quite a bit from a dig, but I was still fighting traction, although much better than the stock tires, they barely fit, lol, but worth it when running at these events.



You could go from a dig, which measured a true 1/2 mile, or doing a rolling start and go from the cones, which is shorter. Most of my runs I did from a dig.



Here's some vids, I may have more from different angles that I'll post if available.

I ran a M4 ZCP VF Hex Tuned, the owner had to be one of the coolest dudes I've ever met.

M4 ZCP JB4 Meth vs. M4 ZCP VF Hex Tune - Dig Run



M4 ZCP JB4 Meth vs. C63S Upgraded Turbos FBO - Dig Run



M4 ZCP JB4 Meth vs. 991 Turbo S Stock - Dig Run



M4 ZCP Meth vs. Ferrari F12 (730HP) - 40 MPH Roll



Same Run but the F12 was the Camera Car -



M4 ZCP JB4 Meth vs. M3 JB4 Map 2 - E30 - 40 MPH Roll



Here's a vid against Jason in the BMW Pure Turbo M3, camera angle is lame, but he pulled nicely.



16 F82 M4 ZCP - DCT - JB4 - Meth - 1/2 Mile 161MPH
08 E92 M3 - DCT - Built Motor - ESS VT3-750 SC
710 WHP/495 WTQ STD CF @ 14.4psi
6.1s 60-130MPH (Drag Strip)
174.12 MPH Shift-S3ctor Standing 1/2 Mile - E9X WR

Last edited by DLSJ5; 10-27-2016 at 01:05 PM..
Reply With Quote
(#2)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 4,117
Join Date: Oct 2013
Car: e90 335i
Default 10-24-2016, 06:41 PM

Hell yea Drew!! Your car was moving on Saturday man. That race against the 991 Turbo and the F12 are soo close. I'm working on my vids now!


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#3)
Old
allmotor_2000 allmotor_2000 is offline
Junior Member
 
Posts: 299
Join Date: Jul 2014
Car: 2014 F10 M5 CP Frozen Grey
Default 10-24-2016, 09:05 PM

Fantastic bud! Great seeing you last weekend and car looked real good out there!!
Reply With Quote
(#4)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 25,901
Join Date: Jan 2008
Default 10-25-2016, 08:25 AM

Awesome videos!


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#5)
Old
DLSJ5 DLSJ5 is offline
Junior Member
 
Posts: 120
Join Date: Jan 2008
Car: E92 M3
Default 10-25-2016, 09:04 AM

Quote:
Originally Posted by Payam @ BMS
Hell yea Drew!! Your car was moving on Saturday man. That race against the 991 Turbo and the F12 are soo close. I'm working on my vids now!
Thanks Brother! Man I wish we'd gotten a clean run. Next time! Great seeing you out there.


16 F82 M4 ZCP - DCT - JB4 - Meth - 1/2 Mile 161MPH
08 E92 M3 - DCT - Built Motor - ESS VT3-750 SC
710 WHP/495 WTQ STD CF @ 14.4psi
6.1s 60-130MPH (Drag Strip)
174.12 MPH Shift-S3ctor Standing 1/2 Mile - E9X WR
Reply With Quote
(#6)
Old
DLSJ5 DLSJ5 is offline
Junior Member
 
Posts: 120
Join Date: Jan 2008
Car: E92 M3
Default 10-25-2016, 09:05 AM

Quote:
Originally Posted by allmotor_2000
Fantastic bud! Great seeing you last weekend and car looked real good out there!!
Always good seeing you Ram! Dude, YOU did incredible out there, great work man.


16 F82 M4 ZCP - DCT - JB4 - Meth - 1/2 Mile 161MPH
08 E92 M3 - DCT - Built Motor - ESS VT3-750 SC
710 WHP/495 WTQ STD CF @ 14.4psi
6.1s 60-130MPH (Drag Strip)
174.12 MPH Shift-S3ctor Standing 1/2 Mile - E9X WR
Reply With Quote
(#7)
Old
DLSJ5 DLSJ5 is offline
Junior Member
 
Posts: 120
Join Date: Jan 2008
Car: E92 M3
Default 10-25-2016, 09:06 AM

Quote:
Originally Posted by Terry @ BMS
Awesome videos!
Thanks T, you really got a solid product, but everyone here already knows that.

I added a vid against Jason, not the best angle but he pulled good in the Pure Turbo BMS M3.


16 F82 M4 ZCP - DCT - JB4 - Meth - 1/2 Mile 161MPH
08 E92 M3 - DCT - Built Motor - ESS VT3-750 SC
710 WHP/495 WTQ STD CF @ 14.4psi
6.1s 60-130MPH (Drag Strip)
174.12 MPH Shift-S3ctor Standing 1/2 Mile - E9X WR
Reply With Quote
(#8)
Old
paulexec paulexec is offline
Junior Member
 
Posts: 31
Join Date: Jul 2016
Car: 2016 M3
Default 11-22-2016, 06:59 AM

Is there a reason you ran the CM7's instead of CM5's on stock turbos? I just ordered a kit for my M3 ZCP and this makes me curious!

Quote:
Originally Posted by DLSJ5
Had a blast at Shift-S3ctor this weekend, ran both Saturday and Sunday at their 1/2 mile airstrip attack. The event went smooth, great SS3 crew as always, and a ton of of awesome cars and people. I met a few new faces, got plenty of runs, and I believe I set the new record for a 1/2 mile trap on a stock turbo S55, @ 157.34. My JB4 and Meth 100%, Dual CM7 Nozzles, Map 8, ZCP M4 ran flawless and it did extremely well against some potent cars, big thanks to Terry and BMS, they've been great to deal with and their products deliver!



It was around mid 80's temp wise, so in cooler weather it may trap a bit higher. I ran with 305/35/20 Nitto NT555R Drag Radials, they helped quite a bit from a dig, but I was still fighting traction, although much better than the stock tires, they barely fit, lol, but worth it when running at these events.



You could go from a dig, which measured a true 1/2 mile, or doing a rolling start and go from the cones, which is shorter. Most of my runs I did from a dig.



Here's some vids, I may have more from different angles that I'll post if available.

I ran a M4 ZCP VF Hex Tuned, the owner had to be one of the coolest dudes I've ever met.

M4 ZCP JB4 Meth vs. M4 ZCP VF Hex Tune - Dig Run



M4 ZCP JB4 Meth vs. C63S Upgraded Turbos FBO - Dig Run



M4 ZCP JB4 Meth vs. 991 Turbo S Stock - Dig Run



M4 ZCP Meth vs. Ferrari F12 (730HP) - 40 MPH Roll



Same Run but the F12 was the Camera Car -



M4 ZCP JB4 Meth vs. M3 JB4 Map 2 - E30 - 40 MPH Roll



Here's a vid against Jason in the BMW Pure Turbo M3, camera angle is lame, but he pulled nicely.

Reply With Quote
(#9)
Old
timberwolf timberwolf is offline
Junior Member
 
Posts: 88
Join Date: Nov 2009
Car: 135i
Default 12-14-2016, 07:57 AM

Drewy baby,
Good job brother! Car is running strong!

Does your white tiger have down *****?

Greg


Burgerized Cars:
17 X5 50i
16 Golf R
13 M5
08 135i

Check out my videos
http://www.youtube.com/gvahan#p/u
Reply With Quote
(#10)
Old
DLSJ5 DLSJ5 is offline
Junior Member
 
Posts: 120
Join Date: Jan 2008
Car: E92 M3
Default 12-20-2016, 11:51 AM

Quote:
Originally Posted by timberwolf
Drewy baby,
Good job brother! Car is running strong!

Does your white tiger have down *****?

Greg
What's up brother!

No ********* in these vids, I had them at the next event in CA, NFZ, car did really well there as well!


16 F82 M4 ZCP - DCT - JB4 - Meth - 1/2 Mile 161MPH
08 E92 M3 - DCT - Built Motor - ESS VT3-750 SC
710 WHP/495 WTQ STD CF @ 14.4psi
6.1s 60-130MPH (Drag Strip)
174.12 MPH Shift-S3ctor Standing 1/2 Mile - E9X WR
Reply With Quote
(#11)
Old
timberwolf timberwolf is offline
Junior Member
 
Posts: 88
Join Date: Nov 2009
Car: 135i
Default 12-20-2016, 12:31 PM

Quote:
Originally Posted by DLSJ5
What's up brother!

No ********* in these vids, I had them at the next event in CA, NFZ, car did really well there as well!
You cleaned up bro! Of course you got the best guys in the business setting your stuff up! That helps!!
Good to see you back on the tarmac! xo


Burgerized Cars:
17 X5 50i
16 Golf R
13 M5
08 135i

Check out my videos
http://www.youtube.com/gvahan#p/u
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2018, N54tech.com