problems with n55 f series wmi kit - N54Tech.com

Ga.silva10 · **problems with n55 f series wmi kit -** 02-05-2017, 10:02 AM

hello terry, i am having some problems with the water methanol kit. i think its not working well because when i run map 3 the meth gauge on jb4 mobile app show 100% all the time. it doesnt move. one day when i turned on the car and the meth gauge was at 65% and when accelerate the gauge began to increase ( i think was working well) but minutes the it gets stucked in 100% again. in the running analisis the meth starts at 100% and makes an horizontal line in the graph.

meth boost aditive: 40
meth flow scaling : 60
start meth flow: 10 psi

the other problem i am having is that some times when i turn off the car and i was using map 3 . when im going to turn it on later the car doesn`t starts up well, starts up like low in revs for a moment.

thank you

Terry @ BMS · 02-05-2017, 10:05 AM

Sounds like a wiring issue if you get a meth signal when the meth is clearly off.

Ga.silva10 · 02-05-2017, 10:10 AM

but when i prime the system it works, and some times work well what should i do ?

Terry @ BMS · 02-05-2017, 10:20 AM

If you want me to look it over post some photos of the installation, including where the blue signal wire is connected, a JB4 log so we can check settings, etc.

Ga.silva10 · 02-05-2017, 07:30 PM

hello terry, i verified the installation and all was like it should be. today i turn on the car and the meth gauge was at 62 but later the gauge was starting at 90 and later the gauge get stuck 100 (it is normal ?)
images:
you can see that it starts at 90 but in the last photos the revs are in ranlenti and the meth gauge shows 100. when i use map 0, 1, 2 the meth gauge stays on.
Name: 16492455_10154302073312083_1276078800_o.jpg
Views: 142
Size: 62.4 KB

Name: 16492455_10154302073312083_1276078800_o.jpg
Views: 142
Size: 62.4 KB

Name: 16523960_10154302071862083_1258541385_o.jpg
Views: 140
Size: 76.4 KB

logs: are short logs but yu can see that when the gauge get stucked in 100 the meth graph is 100 all the time i think there´s a problem

Name: 16593526_10154302073117083_232852049_o.jpg
Views: 140
Size: 105.2 KB

Name: 16593526_10154302073117083_232852049_o.jpg
Views: 140
Size: 105.2 KB

map 3 gear 1-2.csv
log enviar .csv

thank you

Ga.silva10 · 02-05-2017, 07:32 PM

log enviar .csv
map 3 gear 1-2.csv

Lowon · 02-05-2017, 07:44 PM

Attach CSV files not links.

Ga.silva10 · 02-05-2017, 07:49 PM

how can i do that ?

Ga.silva10 · 02-05-2017, 08:17 PM

2017-02-05 20_17_38.csv

Ga.silva10 · 02-05-2017, 08:22 PM

tomorrow i will send more logs running maps 1,2,3 to show that in map 0,1,2 the meth is active

Lowon · 02-05-2017, 10:38 PM

Quote:

Originally Posted by Ga.silva10

how can i do that ?

There's a manage attachments button on posts.

You should probably check the connections from the FSB, pump, and solenoid and going to the jb4 again Incase something's wired wrong.