Burnouts in a 135i - N54Tech.com

rstihl · **Burnouts in a 135i -** 06-30-2016, 04:16 PM

I cant seem to do a standstill burnout in my 2010 135i with mfactory lsd. Traction control all the way off and i rev it up and dump clutch and start to spin a little and as soon as i step on brake it cuts all power. I dont want a line lock. I want to roast my brakes along with my ****in tires!

sshec152 · 07-01-2016, 10:21 AM

It takes a few tries to get down, but i can do it easily now. I rev it up, dump the clutch and right when you feel it start to spin, just barely touch the brake. You literally have to touch just enough for it to engage.

123ersan · 07-01-2016, 10:27 AM

Why do you touch the brakes? Doesn't that slow down the wheel and make you gain traction again?

sshec152 · 07-01-2016, 04:50 PM

Quote:

Originally Posted by 123ersan

Why do you touch the brakes? Doesn't that slow down the wheel and make you gain traction again?

To lock up the front brakes to be able to to a standing burnout. The key is the apply enough pressure to hold the front brakes without locking up the rear brakes and stalling the car.

Enfiftyfore · 07-01-2016, 09:46 PM

Quote:

Originally Posted by rstihl

I cant seem to do a standstill burnout in my 2010 135i with mfactory lsd. Traction control all the way off and i rev it up and dump clutch and start to spin a little and as soon as i step on brake it cuts all power. I dont want a line lock. I want to roast my brakes along with my ****in tires!

Unless you are running slicks, you only need 5 Seconds of burn out. Even if you are on drag radials, you don't need much. Stop hitting your brakes and stop wasting your tires.

kenjermen · 07-01-2016, 10:12 PM

Throw some water under the tires to help them start to spin

za_1m · 07-02-2016, 01:27 AM

Why don't you want a line lock?

mikese82 · 07-02-2016, 10:03 AM

Line lock that bitch.

rstihl · 07-02-2016, 07:49 PM

I want to roast my ****ing tires for like a minute. And when i touch the brake pedal the gas pedal is dead (like i can push it all the way down engine does not rev.

J.J4ck0wsk1 · 07-05-2016, 10:45 AM

Similar issue with my Procede, map 0 and it's fine, but when it's turned on it feels like a secondary traction control is cutting off power and I can't seem to turn it off..

PhilTrill · 07-19-2016, 09:57 AM

I have to pull the ABS fuse to get mine to do a brake stand. My buddies auto had no issues until we did the back end flash then he had the same issue as me.