[E92 420]

All it takes is for somone to try to clear this issue up. I'm more than happy with mine now it's modded so I don't wish to try Although after welding out the squashed sections of my RHD 335i rear turbo outlet pipe I am 99% certain no other pipe wil fit. The Space left now is seriously minimal. The RHD pipe almost touches the manifold without welding out the squashed point and as for the steering column side there's only a few mm's left after I Modded it. I will try to get some decent pics of how it looks when I get home from offshore in a week or so.

[Nexic]

Put me on the list, my wife loathes these forums hahah.

[Race8877]

Rob,can you put me in also .

[Rob@RBTurbo]

Introductory cost will be $189 plus shipping and come with 3 SS T-Bolt Clamps.

List:
1) FRNTHVY
2) Flatspot
3) shandyb135i
4) brendan
5) cebrailbakan
6) Dvo0208
7) 335xiboost
8) cbmac412
9) E92 420
10) ross22
11) _ink
12) triggz
13) Fast335i
14) kenjermen
15) dlp3719
16) Nexic
17) Race8877
18) cya
19)
20)

5 series list:
1) JWMich
2) Nyulak

[FRNTHVY]

Do you have an anticipated ship date?

[Rob@RBTurbo]

It would take about 3-4 weeks after we place the order and numerous things have yet to be done before the order can be placed. So probably around 30-45 days.

Thanks,
Rob

[Nyulak]

Please add me to the 5-series list.

[Rob@RBTurbo]

Originally Posted by Nyulak

Please add me to the 5-series list.

Done.

[E92 420]

Originally Posted by Nexic

From the pictures, it looks like we will need to cut our existing hot side tubing to fit into the silicone, correct? Or will this be one whole silicone piece from the hot side to FMIC?

Have you read the thread or just looked at the pictures

[Nexic]

Originally Posted by E92 420

Have you read the thread or just looked at the pictures

It says minor fab work, I would say its a little more than minor. Either way, I just purchased a used OEM hot side piping for the 335i off ebay for $60 to fab up for this. That way I can retain my OEM parts.

[Rob@RBTurbo]

Originally Posted by Nexic

It says minor fab work, I would say its a little more than minor.

Sorry about that. Will change "minor" to "moderate" fab work. I'd rather error on the side of caution if not anything else.

Thanks,
Rob

[ross22]

Any closer to hitting go on this deal?

[Rob@RBTurbo]

Originally Posted by ross22

Any closer to hitting go on this deal?

No sir. Have silicone vendor loaded through the roof. Kind of trying to keep them focused on one/two/three things at this time to keep from overwhelming...

[Socket]

Originally Posted by Rob@RBTurbo

No sir. Have silicone vendor loaded through the roof. Kind of trying to keep them focused on one/two/three things at this time to keep from overwhelming...

Any progress re the HSCP build Rob??

[Rob@RBTurbo]

Originally Posted by Socket

Any progress re the HSCP build Rob??

None unfortunately and I'd say this one is getting put back quite a ways. Not for any other reason than we need our silicone vendor on more pressing things at the moment… just a guess I'd say sometime in November.

Rob

[cya]

Please add me to the list. Thanks.

[jacobniell]

Originally Posted by Rob@RBTurbo

Update: Sample is in hand. This week we will be test fitting it and if all seems well we will look into producing it.

Lets make a preliminary list to see if there is any interest? Introductory cost will be $189 plus shipping and come with 3 SS T-Bolt Clamps.

Hi Rob

Can you please explain how this RB high flow kit connects to the IC´er? Right now there is the snap function and I assume that your piping do not have this connection, or will this connection be a possible add on made by you like the high flow oil return lines.

Thanks for clarifying

Best

[Rob@RBTurbo]

Originally Posted by jacobniell

Hi Rob

Can you please explain how this RB high flow kit connects to the IC´er? Right now there is the snap function and I assume that your piping do not have this connection, or will this connection be a possible add on made by you like the high flow oil return lines.

Thanks for clarifying

Best

Jacob,

This may not work for everyone and every style of intercooler. Our immediate plan is to offer a couple versions pending on IC style (to cover the vast majority of possibilities), but connecting to the OEM IC (or the HPF with similar clamp) is bar none the lowest priority. If we ever do get to that point we will probably have to CNC an adapter to meet said interface, and then allow the hose to slip over said adapter. All kind of a useless pain simply to retain that clip.

We will have to cross the bridges when we get to them. As of this moment we have our vendor so backed up this project in its entirety is very low priority at this moment and probably will remain low priority until late November.

Thanks,
Rob

[Fmonteiro444]

Rob, I have an AWD coupe. Can this be installed without dropping the subframe?

[Rob@RBTurbo]

Originally Posted by Fmonteiro444

Rob, I have an AWD coupe. Can this be installed without dropping the subframe?

Should be as long as you can access the v-band clamps to remove your hot side charge pipe.

Rob

[cmiggz]

Im in
Can you put me on the list.

[nitemare]

Originally Posted by Rob@RBTurbo

Should be as long as you can access the v-band clamps to remove your hot side charge pipe.

Rob

Rob please add me to the E60 list. Thanks.

[Rob@RBTurbo]

Update: We are going to go ahead and order 20 or so of these. Hopefully some of you guys really want them! A couple pics have been attached.

Introductory cost will be $189 plus shipping and come with 3 SS T-Bolt Clamps.

List:
1) FRNTHVY
2) Flatspot
3) shandyb135i
4) brendan
5) cebrailbakan
6) Dvo0208
7) 335xiboost
8) cbmac412
9) E92 420
10) ross22
11) _ink
12) triggz
13) Fast335i
14) kenjermen
15) dlp3719
16) cmiggz
17)
18)
19)
20)

5 series list:
1) JWMich
2) nitemare
3) Younge60

[Younge60]

Count me in on the 5 series list Rob!

[cmiggz]

Rob are you going to order these asap? ����
When do we send payment?