[Payam @ BMS]

Hey guys! Had a great turnout today with one of our customers. He came all the way from Texas to visit @steve@Fuel-it, @Terry@BMS and us at VM for the weekend! The car did solid today, and we actually got some pump gas numbers too!


The car is an 07 E90 AT equipped with:

VM Top Mount PTE 6466 1.00AR
CP,BOV, HPF IC Full exhaust w/ high flow cats
Fuel it Stage 3 twin 450
Motiv PI with FPR
Level 10 Valve Body and Torque Converter Upgrade

As you can see the 4 different runs here. They all had very, very clean logs from all 15 pulls.

These pulls are done WITHOUT Port Injection and Pump Gas:

17 psi on 93 only, it made 473 whp. Add a CM10 Nozzle and some meth, you can crank it up a bit.
22 Psi on 93 and meth it made 601. We didn't want to continue as we are happy with the results. It did not show any signs of slowing down though.

These pulls we turned ON the Port Injection with Full e85. We added 10 gallons of e85 to the 1 gallon left in the tank so we could turn up the boost now. Meth has been disabled for these runs.

30psi on Full e85 is when it showed timing drops. We did two runs at 30 and made consistent power and left it at that. It was a VERY hot day today, but the car performed flawless. Again, big thanks to @Terry@BMS for always being there.

[robc1976]

Unbelivable!

[kyle]

congratulations, Very nice! Are you running the alpina flash? Also do you plan to see what it can do at the track anytime soon?

[natedog7700]

Automatic trans....... I give it a month lol

[ShocknAwe]

Nice, 600 on 93+meth.

[Terry @ BMS]

Car kicked ass. Jealous of that PTE 6466 G2.

[n54 power]

is BB flasher or MHD ??

[Newguy123]

Sweeet! I'll bet that thing moves out on the e85 boost curve!

[marco_v_w]

Very nice guys!!

[musc]

great job guys!

[ross22]

Amazing numbers congrats. This platform just keeps surprising me.

[bmwboyee]

Can't wait to catch a ride in this rocket once it arrives back in texas.

[jyamona]

Originally Posted by n54 power

is BB flasher or MHD ??

MHD, of course

[Levan-i]

omg <3 <3

[Logan]

Originally Posted by FastGti69

Hey guys! Had a great turnout today with one of our customers. He came all the way from Texas to visit @steve@Fuel-it, @Terry@BMS and us at VM for the weekend! The car did solid today, and we actually got some pump gas numbers too!


The car is an 07 E90 AT equipped with:

VM Top Mount PTE 6466 1.00AR
CP,BOV,HPF IC Full exhaust w/ high flow cats
Fuel it Stage 3 twin 450
Motiv PI with FPR
Level 10 Valve Body and Torque Converter Upgrade

As you can see the 4 different runs here. They all had very, very clean logs from all 15 pulls.

These pulls are done WITHOUT Port Injection and Pump Gas:

17 psi on 93 only, it made 473 whp. Add a CM10 Nozzle and some meth, you can crank it up a bit.
22 Psi on 93 and meth it made 601. We didn't want to continue as we are happy with the results. It did not show any signs of slowing down though.

These pulls we turned ON the Port Injection with Full e85. We added 10 gallons of e85 to the 1 gallon left in the tank so we could turn up the boost now. Meth has been disabled for these runs.

30psi on Full e85 is when it showed timing drops. We did two runs at 30 and made consistent power and left it at that. It was a VERY hot day today, but the car performed flawless. Again, big thanks to @Terry@BMS for always being there.

That's great! The " Hpf IC"is that with the stock c clip connection?

[Race8877]

At 30PSI 741HP with an AT / No slippage on tranny and is holding up to now.
Impressive.

[knissel]

track or die

[Ando @ BMS]

Super!!! All I could do was 705whp with my 6465.

Tranny will hold fine on the dyno and short runs.
Runway event's kills it

Good luck though.

[iturbo]

damn if only stock turbos had a more linear curve like these

[Terry @ BMS]

Originally Posted by Ando @ BMS

Super!!! All I could do was 705whp with my 6465.

Tranny will hold fine on the dyno and short runs.
Runway event's kills it

Good luck though.

Here is a comparison of yours as well as the 135i, and a VT2 car we did a few weeks ago.

[kennejp]

Amazing job! Cant wait to see some videos of it in action!

[PR3CI5N335i]

Great results but I'm curious how long his AT will hold that type of power.

[Terry @ BMS]

He has the torque converter and valve body, but not the trans yet. With full boost shifts I don't imagine it will last long. But we'll see.

[Trickcruiser]

Amazing results!
I am rooting for your transmission man!!!

[135pats]

Sending good juju your way for the 6AT.

Well crap, now I want to turn the boost up too on my 6AT. waita set a bad example