Virtual Dyno Before and After Intake Cleaning - N54Tech.com

nyt · 07:26 PM

The album of intake pictures: http://imgur.com/a/W3Vex
updated with a log that wasn't before I put my *** on. Oops.

goldfz8 · 09-25-2014, 01:47 AM

Wait... You made that much more power with just cleaning

m4xbmw7 · 09-25-2014, 04:35 AM

Lol stop playing man

trebila · 09-25-2014, 05:45 AM

virtual dyno is not a really sharp tool.
I love it and use it frequently, but take care, everything depends on the roads where you take the logs...

MHD · 06:32 AM

1 months between both logs, not the same gear...take with a huge grain of salt ;-)

Socal Hopeless · 09-25-2014, 08:08 AM

my car hasn't been blasted in at least 40k miles, possibly it's whole life @ 108k

going in very soon, can't wait

ba114 · 09-25-2014, 04:42 PM

Quote:

Originally Posted by Artial

1 months between both logs, not the same gear...take with a huge grain of salt ;-)

Agreed. The different gears is a huge factor in the results. This post actually proves nothing.

nyt · 06:52 PM

Woops, not really the gear that's a problem, loaded the wrong before log, without *** on there. I'll dig through my logs and update in a bit.

nyt · 09-25-2014, 07:20 PM

first post updated, same gear, same mods, oops.

ba114 · 09-28-2014, 07:49 PM

having recently had the walnut blasting done, i would not be buying into anything virtual dyno shows for you logs, there is definitely NOT a 40-50hp charge. That more gain than ******* ***...which i just got done on saturday.

Socal Hopeless · 09-28-2014, 11:21 PM

Quote:

Originally Posted by ba114

having recently had the walnut blasting done, i would not be buying into anything virtual dyno shows for you logs, there is definitely NOT a 40-50hp charge. That more gain than ******* ***...which i just got done on saturday.

How would you rate both The blast and the down *****? How's the ass dyno
Thnx

ba114 · 09-28-2014, 11:46 PM

Quote:

Originally Posted by Socal Hopeless

How would you rate both The blast and the down *****? How's the ass dyno
Thnx

walnut blasting = 0 power. There seemed to be a minor reduction in fuel consumption after, but nothing significant.

***, only had done on saturday. There's an audible noise difference, it doesn't boost as high and i'm throwing 2A87 (exhaust VANOS) codes much easier now - i have switched them around without luck in fixing.

As an indication of my faith in virtual dyno, it shows i make the same power pre-*** as post-***... I also dont want to go to the actual dyno now either as i made 258kw back in august with ambient temps around 11 degrees (Celsius) and i wont see those same temps again as we're coming into mid spring/summer now.