N54Tech.com - International Turbo Racing Discussion
(#1)
Old
nguyeneric09 nguyeneric09 is offline
New Member
 
Posts: 8
Join Date: May 2019
Car: E90 335i
Default JB4 STAGE 1 Logs - 05-19-2019, 11:22 PM

Hi there I am uploading my logs to see if my tune is running correctly as it should be. ATM I have two codes P112f and P142e which I will be taking care of asap. Please let me know if you need additional logs.
Attached Files
File Type: csv 2019_05_18 02-13-47.csv (77.6 KB, 11 views)
Reply With Quote
(#2)
Old
Dave @ BMS/Fuel-It!'s Avatar
Dave @ BMS/Fuel-It! Dave @ BMS/Fuel-It! is offline
Super Moderator
 
Posts: 4,514
Join Date: Apr 2014
Car: E92 335XI
Default 05-20-2019, 10:32 PM

Quote:
Originally Posted by nguyeneric09
Hi there I am uploading my logs to see if my tune is running correctly as it should be. ATM I have two codes P112f and P142e which I will be taking care of asap. Please let me know if you need additional logs.
Hey a couple things

Enable 6cyl timing

Update firmware



http://www.fuel-it.biz/

e92 AT 335xi 2.0
Doc Race Kit 6062
Fuel-It!Platinum DIY PI Kit + Stage 2BL
Reply With Quote
(#3)
Old
nguyeneric09 nguyeneric09 is offline
New Member
 
Posts: 8
Join Date: May 2019
Car: E90 335i
Default 05-21-2019, 12:01 AM

Quote:
Originally Posted by Dave @ BMS/Fuel-It!
Hey a couple things

Enable 6cyl timing

Update firmware
Hello Dave Is this the correct firmware?
G5_ISO_32_14
and what number do I put to enable 6cyl timing?

also I am pulling a couple more codes if you have any idea what these are.
2D2E Angle of throttle Valve - Intake Pipe Under Pressure
29DC Cylinder Injection Switch-off
2ABC Charing Pressure sensor
3100 Low boost mode engaged CEL Displayed
2c7c Lambda Probe behind Catalytic Converter 2, Signal

Last edited by nguyeneric09; 05-21-2019 at 12:07 AM..
Reply With Quote
(#4)
Old
Dave @ BMS/Fuel-It!'s Avatar
Dave @ BMS/Fuel-It! Dave @ BMS/Fuel-It! is offline
Super Moderator
 
Posts: 4,514
Join Date: Apr 2014
Car: E92 335XI
Default 05-21-2019, 03:53 AM

Quote:
Originally Posted by nguyeneric09
Hello Dave Is this the correct firmware?
G5_ISO_32_14
and what number do I put to enable 6cyl timing?

also I am pulling a couple more codes if you have any idea what these are.
2D2E Angle of throttle Valve - Intake Pipe Under Pressure
29DC Cylinder Injection Switch-off
2ABC Charing Pressure sensor
3100 Low boost mode engaged CEL Displayed
2c7c Lambda Probe behind Catalytic Converter 2, Signal
Clear codes- see what returns

Yes to firmware

Cyl timing value correlated to the DME you have



http://www.fuel-it.biz/

e92 AT 335xi 2.0
Doc Race Kit 6062
Fuel-It!Platinum DIY PI Kit + Stage 2BL
Reply With Quote
(#5)
Old
nguyeneric09 nguyeneric09 is offline
New Member
 
Posts: 8
Join Date: May 2019
Car: E90 335i
Default 05-21-2019, 06:38 PM

Quote:
Originally Posted by Dave @ BMS/Fuel-It!
Clear codes- see what returns

Yes to firmware

Cyl timing value correlated to the DME you have
Hi Dave I updated the firmware and deleted all codes only 2 show up now

29DC Cylinder injection switch-off
2D2E Angle of throttle valve - intake pipe underpressure, correlation.

I have an e90 335i 2008 I set the DME to 5 is that correct? I will get an updated log later today/tomorrow to see what else I need to adjust thanks for all the help!
Reply With Quote
(#6)
Old
nguyeneric09 nguyeneric09 is offline
New Member
 
Posts: 8
Join Date: May 2019
Car: E90 335i
Default 05-21-2019, 08:37 PM

Quote:
Originally Posted by nguyeneric09
Hi Dave I updated the firmware and deleted all codes only 2 show up now

29DC Cylinder injection switch-off
2D2E Angle of throttle valve - intake pipe underpressure, correlation.

I have an e90 335i 2008 I set the DME to 5 is that correct? I will get an updated log later today/tomorrow to see what else I need to adjust thanks for all the help!
UPDATE

I ran map 1 everything It is running good and not kicking me into map 4. here is my log please let me know if there is anything I need to update. Also the last safety is now saying 1 - Boost over safety.

These are the codes that are back on.

29DC Cylinder injection switch-off
2D2E Angle of throttle valve - intake pipe underpressure, correlation.
2ABC Charging Pressure Sensor
3100 Low boost mode engaged CEL displayed.
Attached Files
File Type: csv 2019_05_21 07-58-15.csv (323.7 KB, 7 views)
Reply With Quote
(#7)
Old
Dave @ BMS/Fuel-It!'s Avatar
Dave @ BMS/Fuel-It! Dave @ BMS/Fuel-It! is offline
Super Moderator
 
Posts: 4,514
Join Date: Apr 2014
Car: E92 335XI
Default 05-21-2019, 09:59 PM

Quote:
Originally Posted by nguyeneric09
UPDATE

I ran map 1 everything It is running good and not kicking me into map 4. here is my log please let me know if there is anything I need to update. Also the last safety is now saying 1 - Boost over safety.

These are the codes that are back on.

29DC Cylinder injection switch-off
2D2E Angle of throttle valve - intake pipe underpressure, correlation.
2ABC Charging Pressure Sensor
3100 Low boost mode engaged CEL displayed.
You don’t go WOT in the log.

We’d need a 3rd gear WOR 2k to redline log

What map sensor are you using?



http://www.fuel-it.biz/

e92 AT 335xi 2.0
Doc Race Kit 6062
Fuel-It!Platinum DIY PI Kit + Stage 2BL
Reply With Quote
(#8)
Old
nguyeneric09 nguyeneric09 is offline
New Member
 
Posts: 8
Join Date: May 2019
Car: E90 335i
Default 05-22-2019, 02:53 AM

Quote:
Originally Posted by Dave @ BMS/Fuel-It!
You dont go WOT in the log.

Wed need a 3rd gear WOR 2k to redline log

What map sensor are you using?
I am using the OEM sensor. and did you mean WOT 2k to redline on 3rd gear? I do not know what WOR means.
Reply With Quote
(#9)
Old
Haynpunch's Avatar
Haynpunch Haynpunch is offline
Junior Member
 
Posts: 494
Join Date: Jun 2017
Car: 07 E90 335i
Default 05-22-2019, 11:03 AM

Quote:
Originally Posted by nguyeneric09
I am using the OEM sensor. and did you mean WOT 2k to redline on 3rd gear? I do not know what WOR means.
WOT = WIDE OPEN THROTTLE (FULL THROTTLE)

In your log (pedal) you do not go 100

Proper Logs:
A couple adaptation runs are good if you made any recent changes
Flat open road
3rd or 4th gear (preferably 3rd)
Traction off
Start log WOT 2k to redline Stop Log
Post it!


07 E90 AT - xHP
JB4 G5 - Trebila BEF
FBO
Hybrids
Reply With Quote
(#10)
Old
nguyeneric09 nguyeneric09 is offline
New Member
 
Posts: 8
Join Date: May 2019
Car: E90 335i
Default 05-24-2019, 01:30 AM

Quote:
Originally Posted by Haynpunch
WOT = WIDE OPEN THROTTLE (FULL THROTTLE)

In your log (pedal) you do not go 100

Proper Logs:
A couple adaptation runs are good if you made any recent changes
Flat open road
3rd or 4th gear (preferably 3rd)
Traction off
Start log WOT 2k to redline Stop Log
Post it!
Here is an updated log. please let me know if I need to re-do anything thanks for the help always!
Attached Files
File Type: csv 2.csv (42.2 KB, 5 views)
File Type: csv 3.csv (29.4 KB, 5 views)
Reply With Quote
(#11)
Old
Haynpunch's Avatar
Haynpunch Haynpunch is offline
Junior Member
 
Posts: 494
Join Date: Jun 2017
Car: 07 E90 335i
Default 05-24-2019, 02:03 AM

Quote:
Originally Posted by nguyeneric09
Here is an updated log. please let me know if I need to re-do anything thanks for the help always!
still not going full throttle


07 E90 AT - xHP
JB4 G5 - Trebila BEF
FBO
Hybrids
Reply With Quote
(#12)
Old
Dave @ BMS/Fuel-It!'s Avatar
Dave @ BMS/Fuel-It! Dave @ BMS/Fuel-It! is offline
Super Moderator
 
Posts: 4,514
Join Date: Apr 2014
Car: E92 335XI
Default 05-24-2019, 06:53 AM

Quote:
Originally Posted by nguyeneric09
Here is an updated log. please let me know if I need to re-do anything thanks for the help always!
You only go WOT for 2-300 rpm.

We need full WOT 2k to redline.

Logging can be difficult with traffic etc- so you need to find a nice, flat, empty stretch



http://www.fuel-it.biz/

e92 AT 335xi 2.0
Doc Race Kit 6062
Fuel-It!Platinum DIY PI Kit + Stage 2BL
Reply With Quote
(#13)
Old
nguyeneric09 nguyeneric09 is offline
New Member
 
Posts: 8
Join Date: May 2019
Car: E90 335i
Default 05-27-2019, 12:17 AM

Quote:
Originally Posted by Dave @ BMS/Fuel-It!
You only go WOT for 2-300 rpm.

We need full WOT 2k to redline.

Logging can be difficult with traffic etc- so you need to find a nice, flat, empty stretch
Sorry for delay been working a lot lately no time to log but here you go! I hope I did everything right this time thank you for your patience.
Attached Files
File Type: csv 3333.csv (11.6 KB, 6 views)
Reply With Quote
(#14)
Old
Dave @ BMS/Fuel-It!'s Avatar
Dave @ BMS/Fuel-It! Dave @ BMS/Fuel-It! is offline
Super Moderator
 
Posts: 4,514
Join Date: Apr 2014
Car: E92 335XI
Default 05-27-2019, 08:44 AM

Hey- still don't go WOT...try again : )



http://www.fuel-it.biz/

e92 AT 335xi 2.0
Doc Race Kit 6062
Fuel-It!Platinum DIY PI Kit + Stage 2BL
Reply With Quote
(#15)
Old
nguyeneric09 nguyeneric09 is offline
New Member
 
Posts: 8
Join Date: May 2019
Car: E90 335i
Default 05-27-2019, 03:23 PM

Quote:
Originally Posted by Dave @ BMS/Fuel-It!
Hey- still don't go WOT...try again : )
I did go WOT I’m looking at the logs I’m not sure why it drops my foot was all the way down maybe the sensor is messed up hmm?
Reply With Quote
(#16)
Old
Dave @ BMS/Fuel-It!'s Avatar
Dave @ BMS/Fuel-It! Dave @ BMS/Fuel-It! is offline
Super Moderator
 
Posts: 4,514
Join Date: Apr 2014
Car: E92 335XI
Default 05-27-2019, 08:41 PM

Quote:
Originally Posted by nguyeneric09
I did go WOT Im looking at the logs Im not sure why it drops my foot was all the way down maybe the sensor is messed up hmm?
possible- looks to get stuck at 76/77



http://www.fuel-it.biz/

e92 AT 335xi 2.0
Doc Race Kit 6062
Fuel-It!Platinum DIY PI Kit + Stage 2BL
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2018, N54tech.com