N54Tech.com - International Turbo Racing Discussion
(#1)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,693
Join Date: Jan 2008
Default Mercedes AMG C63 & C63S JB4 - 09-18-2018, 01:25 PM



Use subject to terms and conditions posted at http://www.burgertuning.com/terms.html

THIS PART IS LEGAL FOR USE ONLY IN COMPETITION RACING VEHICLES AS DEFINED UNDER CALIFORNIA LAW, AND IS NOT LEGAL FOR USE IN ANY OTHER MOTOR VEHICLE. California law defines a "racing vehicle" as "a competition vehicle not used on public highways." (Calif. Health & Safety Code 39048) This part may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event. Competition-only motor vehicles may not be driven to a racing event on a public highway and must be transported on a trailer or other carrier. USE OF THIS PART IN ANY OTHER VEHICLE MAY SUBJECT YOU TO FINES AND PENALTIES FOR VIOLATION OF FEDERAL AND/OR STATE LAW, WILL VOID YOUR WARRANTY FROM BURGER MOTORSPORTS, INC, AND CAN VOID YOUR VEHICLE'S WARRANTY. It is your responsibility to comply with all applicable federal and state laws relating to use of this part, and Burger Motorsports, Inc hereby disclaims any liability resulting from the failure to use this part in compliance with all applicable federal and state laws.


This is the central point of contact for all Mercedes Benz AMG C63 & C63S JB4 related information. Anything from install directions, to firmware updates, to settings, to frequently asked questions. Any and all relevant info is linked in this post. If you come across something missing from here be sure to let us know.

Order the full JB4 system here.

Map changes, datalogging, updates are done using the BMS data cable or the JB4 Mobile bluetooth kit.

JB4 Mobile Smart Phone wireless connection directions Click here
BMS data cable hard wired directions Click here

Map Guide as of V2 Firmware:
Map 0: Stock operation, JB4 disabled
Map 1: Default performance map, 4psi peak over stock, taper to redline
Map 2: 5psi peak over stock, taper to redline
Map 3: 6psi peak over stock, less taper to redline, suggested for E85 mixture or octane booster
Map 4: 6.5psi peak boost request over stock, less taper to redline, requires unleaded racing fuel or E85 mixture
Map 5: 7psi peak request over stock, less taper to redline, requires unleaded racing fuel or E85 mixture
Map 6: Custom additive boost profile, boost request over stock
Map 7: Progressive WMI (water/meth) mapping based on boost additive setting and WMI flow
Map 8: Low boost VALET / Safety map

We suggest all vehicles email in or post a log on map1 so we can confirm all is well BEFORE attempting to run higher power maps.

User Adjustments

While there are several user adjustable parameters, for now we only want customers to adjust the boost by gear settings. These are critical to improving traction off the line and something no other C63 tuning system offers, so take advantage of them! Enter the amount of boost to reduce per gear. For example, entering 3psi in 1st will reduce 1st gear by 3psi regardless of the performance map selected. We suggest values of 4psi in 1st gear, and 2psi in 2nd gear, to start. Most vehicles will not need to limit boost in 3rd gear.


Optional BCM (Boost Control Module)

The JB4 attaches to the manifold TMAP, chargepipe MAP, and fuel pressure connections on each side of the engine, for six total connection points plus OBDII for CANbus. These fundamental attachments provide the JB4 with a wide range of tuning adjustment. For vehicles targeting very high boost levels using heavy bolt modifications, WMI, larger turbos, and/or very high octane, additional wastegate dutycycle may be beneficial in driving boost up to the higher target. To increase wastegate dutycycle the BCM add on harness is required. Although not currently available it will be $199 and plugs in to the JB4 harness and the boost control solenoid under the vehicle for direct wastegate control.

Firmware:

Click on firmware file at bottom of this post to download.

Default Settings:

Name:  Untitled.png
Views: 1116
Size:  37.0 KB

Track Results:





Dyno Results

Name:  c63_dyno_jb4.jpg
Views: 2723
Size:  115.7 KB
Name:  map0_log.jpg
Views: 2722
Size:  43.5 KB
Name:  c63_dyno_jb4_intake.jpg
Views: 2776
Size:  110.7 KB
Name:  jb4_log1.jpg
Views: 2705
Size:  45.1 KB

Attached Files
File Type: hex JB4_AMG_C63_1_T2.hex (51.5 KB, 114 views)
File Type: hex JB4_AMG_C63_2.hex (54.6 KB, 75 views)


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#2)
Old
Zeid Nassar Zeid Nassar is offline
New Member
 
Posts: 1
Join Date: Sep 2018
Car: Bmw M4,Amg c63s
Default 09-22-2018, 06:17 AM

Good results so far��, any plans to push it more with WMI and ********* ? Let’s see what this monster can do������.
Any news for the release date? Can’t wait to remove the racechip and put the jb4 on it
Reply With Quote
(#3)
Old
notabenex notabenex is offline
Junior Member
 
Posts: 63
Join Date: Mar 2015
Car: MB W205 C250
Default 09-27-2018, 11:37 PM

Please take my money!

Any release date? Will it be 2018?
Reply With Quote
(#4)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is online now
Super Moderator
 
Posts: 5,279
Join Date: Oct 2013
Car: e90 335i
Default 09-28-2018, 05:11 AM

Quote:
Originally Posted by notabenex
Please take my money!

Any release date? Will it be 2018?
Probably in a month or so


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#5)
Old
notabenex notabenex is offline
Junior Member
 
Posts: 63
Join Date: Mar 2015
Car: MB W205 C250
Default 09-28-2018, 05:13 AM

Sounds amazing. I am willing to do the testing in EU. I am close to dyno.


Quote:
Originally Posted by notabenex
Please take my money!

Any release date? Will it be 2018?
Quote:
Originally Posted by Payam @ BMS
Probably in a month or so
Reply With Quote
(#6)
Old
notabenex notabenex is offline
Junior Member
 
Posts: 63
Join Date: Mar 2015
Car: MB W205 C250
Default 10-10-2018, 01:34 AM

Any updates?
Reply With Quote
(#7)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,693
Join Date: Jan 2008
Default 10-10-2018, 08:30 AM

JB4 and intake are in production. Will post when first batches are ready.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#8)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is online now
Super Moderator
 
Posts: 5,279
Join Date: Oct 2013
Car: e90 335i
Default 10-10-2018, 10:25 AM

Quote:
Originally Posted by Terry @ BMS
JB4 and intake are in production. Will post when first batches are ready.
Need to do more testing for intakes


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#9)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,693
Join Date: Jan 2008
Default 10-11-2018, 07:40 PM

Headed back to the dyno today for additional intake testing, and also some new JB4 mapping we're playing with to best take advantage of a race gas mixture. Put down lots of 570whp runs with a best of 577whp.
Attached Images
   


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#10)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is online now
Super Moderator
 
Posts: 5,279
Join Date: Oct 2013
Car: e90 335i
Default 10-11-2018, 08:45 PM

Is that basically a 30-40whp delta with intake on top of the tune? Crazy how restrictive the intakes are, it's holding back so much even tuned!


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#11)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,693
Join Date: Jan 2008
Default 10-12-2018, 08:36 AM

Intake really opened it up, when combined with direct solenoid control via the JB4 for additional boost, look out. Once the JB4 & intake are released we'll get working on an integrated WMI kit.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#12)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is online now
Super Moderator
 
Posts: 5,279
Join Date: Oct 2013
Car: e90 335i
Default 10-12-2018, 09:32 AM

Quote:
Originally Posted by Terry @ BMS
Intake really opened it up, when combined with direct solenoid control via the JB4 for additional boost, look out. Once the JB4 & intake are released we'll get working on an integrated WMI kit.
So far this thing is on par with my M4 like exactly. Can you line those graphs up later?


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#13)
Old
notabenex notabenex is offline
Junior Member
 
Posts: 63
Join Date: Mar 2015
Car: MB W205 C250
Default 10-13-2018, 09:27 AM

Would there be a chance to bypass speed limiter?

I have EU C63 and I can easily reach 257kmh on speed daily when going to work
Reply With Quote
(#14)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,693
Join Date: Jan 2008
Default 10-13-2018, 09:43 AM

We're not planning on that at least not initially.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#15)
Old
jlcf22 jlcf22 is offline
Junior Member
 
Posts: 125
Join Date: Sep 2013
Car: 335i
Default 10-15-2018, 09:43 AM

so these cars have potential to make more power than the m3 f80/f82? looks like the c63 would make 650whp easily with meth, e30 mix and some kittie cats?
Reply With Quote
(#16)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,693
Join Date: Jan 2008
Default 10-15-2018, 10:02 AM

Similar potential I think to the S55.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#17)
Old
notabenex notabenex is offline
Junior Member
 
Posts: 63
Join Date: Mar 2015
Car: MB W205 C250
Default 10-21-2018, 12:41 AM

Checkin this thread 5x a day, just to get it ASAP B-)
Reply With Quote
(#18)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,693
Join Date: Jan 2008
Default 10-21-2018, 09:57 AM

Don't worry we've got a batch of 250 under production. The first go around is always a little slower. May be a few weeks. But we'll post as soon as we have them.

In the mean time we'll be durability testing the JB4 tuning and intake as Shift Sector next weekend, and NoFlyZone a couple weeks after.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#19)
Old
Jon @ BMS's Avatar
Jon @ BMS Jon @ BMS is offline
Administrator
 
Posts: 43
Join Date: Jan 2008
Default 10-28-2018, 01:38 PM

We got lots of good data at the Shift Sector event. We'll be integrating what we learned into some changes to the prototype mapping. Hit the speed limiter on all the JB4 runs. Map 0 which disables the JB4 ran 11.5mph less at 144.4!

All runs on a mix of about 80% race gas with the BMS intake prototype installed.
Attached Images
        


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please see http://www.burgertuning.com/emissions_info.html for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#20)
Old
notabenex notabenex is offline
Junior Member
 
Posts: 63
Join Date: Mar 2015
Car: MB W205 C250
Default 11-10-2018, 01:17 AM

Hi, would it be ready before christmas?
Reply With Quote
(#21)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,693
Join Date: Jan 2008
Default BMS 2018 C63 JB4 Dragy Testing - 11-18-2018, 10:53 PM

Hey guys,

Was great boost weather tonight (55F) so decided to head over to the private track for a few pulls.

Testing was done in our 2018 C63 base model, JB4, BMS intake, 30% E85 fuel. JB4 tuning was set to map5 (+7psi over stock peak), launch mode active, and to improve traction I used the JB4's boost by gear option to reduce boost by 4psi in 1st.

Overall happy with the best run of 11.5@127mph. If we could get that 60' down in the 1.7s range where it should be, look out!
Attached Images
    


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#22)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is online now
Super Moderator
 
Posts: 5,279
Join Date: Oct 2013
Car: e90 335i
Default 11-19-2018, 09:11 AM

This is very impressive, that trap speed is wow.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#23)
Old
jlcf22 jlcf22 is offline
Junior Member
 
Posts: 125
Join Date: Sep 2013
Car: 335i
Default 12-14-2018, 10:22 AM

Release date?
Reply With Quote
(#24)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is online now
Super Moderator
 
Posts: 5,279
Join Date: Oct 2013
Car: e90 335i
Default 12-14-2018, 11:57 AM

Quote:
Originally Posted by jlcf22
Release date?
As long as they stay on schedule it looks like next week from what I have here in my notes!!


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#25)
Old
spikiii's Avatar
spikiii spikiii is offline
JB4 addict
 
Posts: 103
Join Date: Dec 2012
Car: powered by JB4
Default 12-15-2018, 03:40 PM

This is AWESOME~!

I just offloaded my 340i and stepped up into a C63s. Having been with you guys for ages in my bimmer, i thought switching brands would mean loosing out to another tuner.

Have been reading up about tuning options for the w205 C63S and for piggyback variants, there's not a huge number of them out there. The one thing they keep mentioning is a "difficult installation" or "leave 3-5hrs aside to install" - @Terry, @Jon, @Payam, how does this install compare (effort/diffuclty-wise) to the B58 install?

If/When you guys release this (happy to help test too - I was on your first beta batches for the B58 too) ... so much joy right now :D :D :D Can you let me know indicative price too?
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2019, N54tech.com