 |
|
||||
| |||||
|
(#1)
|
|
|||
Please look at these logs -
09-22-2019, 11:18 AM
Hi, can you please look at these two logs and check for knock or anything happening thats not supposed to be happening.
Both logs are a 4th gear pull from 3000rpm to red line and shifting into 5th gear I use Western Canadian 91 or 94 octane gas. I know our gas isn't as good as it is in the states so thats partially my concern. Please let me know, Thanks. 
|
|
(#2)
|
|
||||
|
09-22-2019, 05:58 PM
Would need the CSV files... Not PDF.
Home of the JB4 the worlds most popular turbocharged tuning system! It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
|
(#3)
|
|
|||
|
09-22-2019, 06:08 PM
sorry about that.
This should be what you are looking for.
|
|
(#4)
|
|
||||
|
09-24-2019, 06:39 PM
Look more or less as expected. Some octane would help power here for sure.
Home of the JB4 the worlds most popular turbocharged tuning system! It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
|
(#5)
|
|
|||
|
09-25-2019, 10:57 AM
Quote:
I just want to make sure everything is running safe on Map 1 & Map 2.
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
Linear Mode
|
|
Copyright © 2007 - 2020, N54tech.com