 |
|
|
New Member
|
|
Posts: 6
Join Date: Aug 2020
Car: 2020 bmw m5comp
|
|
Log for 2020 m5 comp -
09-14-2020, 10:15 AM
It’s on the above post from 1 week ago
|
New Member
|
|
Posts: 5
Join Date: Sep 2020
Car: 2020 M5 competition
|
|
new to the platform and the tuning. -
09-14-2020, 05:20 PM
finally got my jb4 connected to my phone and am running map2. I updated to v9 firmware I see is there newer versions then these as well? now what is needed to adjust in the app to make sure all my settings are right for my setup. just have a ********* and the jb4 currently and primarily run 93 only. did a code check and one popped up for intake manifold with plausibility of pressure too high? just need insight on what I am doing as I am not sure. new platform
|
 |
Tuner
|
|
Posts: 33,066
Join Date: Jan 2008
|
|

09-14-2020, 07:54 PM
Load up v10 firmware and evaluate map2. If you have any issues/codes just email me a log and I'll help you sort it out. terry@burgertuning.com
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
 |
Junior Member
|
|
Posts: 129
Join Date: Jan 2008
|
|

09-24-2020, 02:03 PM
Quote:
Originally Posted by Terry @ BMS
Load up v10 firmware and evaluate map2. If you have any issues/codes just email me a log and I'll help you sort it out. terry@burgertuning.com
|
Hey Terry, I'm going to try out V.11 later. I'm on V.10 map2 4gals of E85 16gals of 91 and running strong! I changed the DB to 50 from top to bottom and was just wondering what affect that has? Quicker to boost in the lower RPMs?
|
 |
Tuner
|
|
Posts: 33,066
Join Date: Jan 2008
|
|

09-24-2020, 02:13 PM
It's just the default for how WGDC is applied, 50 is the same as 0. But some people have random numbers or lower numbers which would reduce boost targeting.
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
Junior Member
|
|
Posts: 41
Join Date: Jul 2016
Car: 2013 550i m-sport
|
|

09-25-2020, 06:09 PM
Quote:
Originally Posted by Down4it
Hey Terry, I'm going to try out V.11 later. I'm on V.10 map2 4gals of E85 16gals of 91 and running strong! I changed the DB to 50 from top to bottom and was just wondering what affect that has? Quicker to boost in the lower RPMs?
|
You don't run lean on that much ethanol? Are ppl running 4-5 gallons of e85 now I thought it couldn't add enough fuel to keep up.
|
 |
Junior Member
|
|
Posts: 129
Join Date: Jan 2008
|
|

09-25-2020, 06:46 PM
Quote:
Originally Posted by Morebs4me
You don't run lean on that much ethanol? Are ppl running 4-5 gallons of e85 now I thought it couldn't add enough fuel to keep up.
|
Everyone that has been running it has been happy and people are running up to 6 gallons but it's not recommended. At 4gal with another 16gal of 91oct its like running E20, 6 gallons would be E30 and then you're starting to push the fueling limits from what i understand.
|
Junior Member
|
|
Posts: 41
Join Date: Jul 2016
Car: 2013 550i m-sport
|
|

09-25-2020, 06:55 PM
Did terry say he doesn't like dp for the car? How come?
|
 |
Tuner
|
|
Posts: 33,066
Join Date: Jan 2008
|
|

09-26-2020, 01:15 PM
20% E85 has been working pretty well for most customers. Some are able to get up to E30 before the JB4 triggers a lean safety.
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
 |
Tuner
|
|
Posts: 33,066
Join Date: Jan 2008
|
|

09-28-2020, 02:33 PM
Had a couple reports of the BC menu for changing maps between 0, 1, and 2 not working in the most recent firmware. Anyone here have a similar issue with it?
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
 |
New Member
|
|
Posts: 9
Join Date: Feb 2020
Car: F90 M5
|
|

10-10-2020, 04:30 AM
yes. I still cannot switch maps on the fly
|
 |
Tuner
|
|
Posts: 33,066
Join Date: Jan 2008
|
|

10-15-2020, 02:07 PM
I guess a better way to ask it, anyone not having an issue with the BC map switching? 
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
 |
Senior Member
|
|
Posts: 703
Join Date: Jun 2016
Car: 2013 BMW 335i xdrive M Sport
|
|

10-15-2020, 05:10 PM
Hi guys for Purge meth Map7 is not working. Map 8 is correct. Is good tidea to fix first page ...
Keep it up
13 BMW 335ix Full Weight 10.64 @129mph N55 WR SOLD
15 BMW M4 Full Weight 10.69@133mph stock turbos SOLD
18 BMW XXXX Car in Process
drag track online set up contact on Instagram @luchocampusano YouTube Lucho Campusano
|
 |
Tuner
|
|
Posts: 33,066
Join Date: Jan 2008
|
|

10-15-2020, 05:12 PM
I'll check and fix the documentation!
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
New Member
|
|
Posts: 1
Join Date: Oct 2020
Car: 2020 M8 Gran Coupe
|
|

10-17-2020, 02:51 PM
Hi Terry,
I apologize if I'm posting this in the wrong place I saw your note about using the support sub forum but honestly there was no link in that sticky to the new support sub-forum. also I read through and noticed that you asked people to email them their logs but all I see is Terry at BMS I don't actually see a full email address or when I visit your profile page likewise I don't see a way of contacting, so please excuse me if this is the wrong thread etc. I decided to just go with the most recent
F93, BMS Intake, JB4, v9 updated. 94 Oct.
Everything runs great until I connected the EWG bc I wanted to run more than just map 1.
Feels like when the boost is about to kick in, is sputters and  holds it back. Low Boost only or none.
finally I noticed you mentioned an update to V10 or an update to the 11 however I don't see those posted either.
Sincerely,
NoJail
|
 |
Tuner
|
|
Posts: 33,066
Join Date: Jan 2008
|
|

10-17-2020, 03:47 PM
You can always post a log here if you want me to check it out.
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
New Member
|
|
Posts: 1
Join Date: Nov 2020
Car: 2019 M5 Competition
|
|

11-15-2020, 03:08 PM
Here's my report after coming back from Shift Sector.
2019 m5 competition bone stock only running jb4 with MS109 on map 5.
Overall the car performed well but I was having intermittent issues with the drivetrain malfunction when letting the car shift itself. Later I was manually shifting and it still did it.
I started messing with the car settings and changed from 4wd sport to just 4wd, that combined with manual shifting I didn’t have any more issues and the car consistently hit 159.5 on multiple runs. The speed limiter cut in right before I hit the flags so I’m sure this would be low 160s.
|
 |
Tuner
|
|
Posts: 33,066
Join Date: Jan 2008
|
|

11-16-2020, 10:56 AM
Strange on the fault letting it shift itself but trap speed is moving!
Able to read the code that was coming up?
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
New Member
|
|
Posts: 5
Join Date: Sep 2020
Car: 2020 M5 competition
|
|
questions on mods and fueling -
01-23-2021, 04:49 PM
so im looking to add primary ********* I currently have secondary. and running the jb4 been on map 2 had no issues cars been running great. my main question is how much bolt ons can be done without having to a true ecu flash? Do intakes really do anything and will the jb4 adjust for the intakes? looking to try and get as much out of the car as I can. if it comes down to voiding warranty then so be it. looking for advice please or recommendations on what's best.
|
 |
Tuner
|
|
Posts: 33,066
Join Date: Jan 2008
|
|

01-24-2021, 10:41 AM
The BMS intake will add some top end power. Not huge gains, but worth the low cost and easy install. Plus they sound and look great!
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
New Member
|
|
Posts: 5
Join Date: Sep 2020
Car: 2020 M5 competition
|
|
mods and fueling. -
02-02-2021, 08:48 PM
yes I've been debating the BMS intakes or the project gamma intakes. questions on fueling with the different maps. can I get some insight on the other maps or with fueling like with ms109 or E85 mixtures. what mods are needed and what not.
|
 |
Tuner
|
|
Posts: 33,066
Join Date: Jan 2008
|
|

02-03-2021, 11:31 AM
You can run maps 1-3 on E20. If using MS109 you can run any map you want, that's the best fuel for racing. But anything unleaded race gas will do for maps 4+.
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
New Member
|
|
Posts: 8
Join Date: Jul 2020
Car: m5
|
|

02-10-2021, 10:04 AM
a side question to terry on s63 engine for f90,base on your experience what does bmw do on competition models?the 25hp is acheived with a higher boost in ecu tuning?i assume hardware of m5/m5c are exactly same- am i right?
the ultimate question will be,what will be the tuning potential between m5 and m5c? it makes more sense that running jb4 on both car shall get exact same result in aggressive mapping?or not?
|
New Member
|
|
Posts: 5
Join Date: Sep 2020
Car: 2020 M5 competition
|
|

03-03-2021, 08:58 PM
are there any new updates to the firmware? I had seen it looked there were some adjustments made. I believe I am running version 10 on map2 with only secondaries as my current mods.
|
 |
Junior Member
|
|
Posts: 129
Join Date: Jan 2008
|
|

03-04-2021, 01:40 PM
Quote:
Originally Posted by BigChiefM5comp
are there any new updates to the firmware? I had seen it looked there were some adjustments made. I believe I am running version 10 on map2 with only secondaries as my current mods.
|
I just noticed the new update 11/T3, I'm going to upload it later today 
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Copyright © 2007 - 2020, N54tech.com
|