[Exarmy2010]

Just bought a daw turbo and dorch stage 2 for black Friday. Not seeing a bef setting for just pure and race,what should I use? And what should my map 6 settings be to start? Going to be running just 93 octane gas.

[Steve @ BMS/Fuel-It!]

Not sure what a "daw" turbo means. Get everything running correctly with the JB4 in bypass (map 4) first. You'll want to run a pump map for that setup and refer to this thread.

N55 Large Turbo Tuning Info - N54Tech.com - International Turbo Racing Discussion

[Exarmy2010]

I have a b58 motor, maps are completely different from a n55. Daw turbo is a dynamic autowerx turbo, runs similar to a pure 800, might spool a little quicker. Pump is only for 89-91, according to the b58 bef post.

[Steve @ BMS/Fuel-It!]

Whoops...forgot I was in the B58 forum when I posted that link. I'd just load the pump flash, then get the car running correctly on map 4 with the JB4 in bypass, and do a log to verify all looks good. Once that's done we can look at cranking up the boost