N54Tech.com - International Turbo Racing Discussion
(#1)
Old
naughty140 naughty140 is offline
New Member
 
Posts: 11
Join Date: Mar 2019
Car: BMW M140i
Icon1 m140i Log Check? - 05-14-2020, 06:37 AM

I would appreciate it if someone could take a quick look at my log. I know you guys are plagued with the same questions everyday, so I understand if it's tiresome.

I'm really keen to understand the logs myself, so if you could tell me what I should be looking out for, and roughly what it's doing to the car, that'd be great. (AFR, Trim & Target lines for example)

I installed the v15 firmware a few weeks ago. I just want to make sure everything is running OK. I'm pretty certain everything is normal.

Using map 1 for now, I'll knock it up to map2 and then 3 if the car keeps reacting positively. Running Shell V Power 97 octane fuel. Car is completely stock engine wise.

I've been running the JB4 since March 2019, but I deactivated throughout the winter as I don't push the car too often during those months it was running on the old firmware obviously.

I did 3 runs, I was going to post them in order, but I can't get the images to display via the insert image button.

I can also upload the log data if needed.
Attached Images
   

Last edited by naughty140; 05-14-2020 at 06:46 AM..
Reply With Quote
(#2)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 6,162
Join Date: Oct 2013
Car: e90 335i
Default 05-21-2020, 12:14 AM

Please attach the CSV file.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#3)
Old
naughty140 naughty140 is offline
New Member
 
Posts: 11
Join Date: Mar 2019
Car: BMW M140i
Default 05-24-2020, 04:00 AM

Quote:
Originally Posted by Payam @ BMS
Please attach the CSV file.
Thanks. I'll attach them in order of the logs displayed.
Attached Files
File Type: csv 2020_05_14 01-44-32 map1 log run1.csv (6.0 KB, 62 views)
File Type: csv 2020_05_14 01-49-0 map log run2.csv (5.2 KB, 63 views)
File Type: csv 2020_05_14 01-57-57 map1 log run3.csv (5.0 KB, 68 views)
Reply With Quote
(#4)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Tuner
 
Posts: 32,587
Join Date: Jan 2008
Default 05-25-2020, 07:32 PM

Octane looks a little shaky. This is v11 firmware. Update to v16 and grab another map1 log for comparison.


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#5)
Old
naughty140 naughty140 is offline
New Member
 
Posts: 11
Join Date: Mar 2019
Car: BMW M140i
Default 05-26-2020, 07:48 AM

Quote:
Originally Posted by Terry @ BMS
Octane looks a little shaky. This is v11 firmware. Update to v16 and grab another map1 log for comparison.
Thanks Terry, sorry to waste your time.

I've just done two runs on the (hopefully) V16 firmware.

take a look if you get a minute.
Attached Images
  
Attached Files
File Type: csv 2020_05_26 03-33-14 V16 Map1 Run1.csv (4.5 KB, 65 views)
File Type: csv 2020_05_26 03-33-14 V16 Map1 Run2.csv (4.9 KB, 63 views)
Reply With Quote
(#6)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Tuner
 
Posts: 32,587
Join Date: Jan 2008
Default 05-27-2020, 10:37 AM

Looks much better to me here, try map2 next.


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2020, N54tech.com