N54Tech.com - International Turbo Racing Discussion
(#526)
Old
VTR VTR is offline
New Member
 
Posts: 19
Join Date: Feb 2018
Car: bmw e82
Default 08-01-2019, 08:49 PM

Hello!!!

I just bought these turbos

VTTO"GC 2.0" Stock location

Is the Flash Race Hybrid correct?


N54 "GC 2.0" Stock location turbochargers
Reply With Quote
(#527)
Old
Voodoo Priest Voodoo Priest is offline
New Member
 
Posts: 18
Join Date: Sep 2018
Car: 2007 e92 335i
Default 08-09-2019, 03:30 AM

Question about which bef map to use?
2007 e90 335i manual
All maintenance is current
Index 12's
New Bosch coils
Stage 2 pump
Fbo
Hexon rr550
E30
Jb4 with bef.
Which before hybrid map should I use?
Reply With Quote
(#528)
Old
fazman fazman is offline
Junior Member
 
Posts: 35
Join Date: Jan 2013
Car: e90 FBO
Default 08-11-2019, 12:52 AM

Hi Terry,

I'm thinking to go with the n54 cast PURE turbos as a replacement and wanted to get an idea if I could continue using your JB4 G5 ISO piggy on map 5 (Without the BEF) as I have with the stock turbos? Once I get time I would actually get the car tuned.

Goals: I'm fine with under 400hp on 91 pump gas, I don't think the 6AT AWD would handle more than 500hp so I would like to stay under that once tuned?

My car is a 2008 335xi 6AT with 186k miles on it. I'm getting a turbo siren/howling on my original stock turbos under low load driving. I also have had a lot of wastegate rattle since 125k miles on the clock. I have noticed a lot of oil consumption as well, always get 30FF, and often get lamba codes.

Below is my list of parts I have yet to order:
* Pure n54 cast turbos 2"
* BMS inlets 2"
* BMS vacuum side OCC
* FuelIt Stage 2 bucketless LPFP
* Turbo install kit (BMW Turbocharger Installation Kit - 11627558906KT | FCP Euro)
* Corteco Motor mounts
* Waterpump + TStat + bolts + U Hose + Bypass hose
* Oil pan gasket + bolts
* Valve cover (cover + gasket + bolts)
* All four 02 sensors
* Spark plugs (BMW ZGR6STE2)
* oil change (Walmart Castrol 5w-40 changed every 7500 miles) + Mann filter

I am not sure if my Rear Main Seal is leaking, if it is, then I might need to pull the motor and maybe do the front main seal also and install outlets?

What is already on the car:
* BMS OCC
* JB4 G5 + cable + DCI + D P fix @ 5 Oclock
* ER CP with TialQ BOV
* Full ER FMIC anodized with CF Shroud
* AR D P s

Maintenance items performed last summer (FCPEuro parts)
* New coolant reservoir + Cap + expansion tank line + upper radiator hose
* New OFHG
* New starter
* pulley/tensioner/belt kit
* new spark plugs
* new vacuum lines (All 19 feet)
* new boost solenoids
* New front brake kit and brake fluid
* 6AT pan and fluids
* transfer case fluid
* front control arm kit (6 piece)

History (around 2014):
All new index 12 injectors @ 90k miles
Carbon blast @ 90k miles
Delphi coils @ 90k miles


Last edited by fazman; 08-12-2019 at 08:50 PM..
Reply With Quote
(#529)
Old
335i_GC 335i_GC is offline
New Member
 
Posts: 2
Join Date: Sep 2019
Car: bmw 335i
Default 09-25-2019, 11:07 AM

hi there guys I'm a new member on this forum ..

i own a built 335i running meth. around the 700 mark.
my vtt turbos went bang recently .. well the turbo oil seals went so ive just purchased the new GC stock location turbos from tony.

just need some help mapping my jb4 to suit

on the very first page on this thread .. could somone talk me through what i need to do to get this car back up and running... it previously had tonys stage 2 + turbos but i know these GC turbos produce more power. there aren't many guys i know of that can help me with mapping a jb4 in the united kingdom

many thanks
wayne
Reply With Quote
(#530)
Old
Joelkswagen Joelkswagen is offline
New Member
 
Posts: 21
Join Date: Sep 2019
Car: 135i
Default 10-09-2019, 08:37 AM

Hey guys, my Pure Stage 2 go on in two weeks! I have put together a short side by side comparison video between the pure stage 2 and stock turbos. Thought some of you here might find it interesting. I will be sure to do a good driveability comparison once they are mounted.



N54 Pure Stage 2 hybrid turbos vs Stock - Side by side comparison! - YouTube
Reply With Quote
(#531)
Old
zaw111 zaw111 is offline
New Member
 
Posts: 2
Join Date: Apr 2019
Car: bmw
Default 11-11-2019, 04:25 AM

Quote:
Originally Posted by 335i_GC
hi there guys I'm a new member on this forum ..

i own a built 335i running meth. around the 700 mark.
my vtt turbos went bang recently .. well the turbo oil seals went so ive just purchased the new GC stock location turbos from tony.

just need some help mapping my jb4 to suit

on the very first page on this thread .. could somone talk me through what i need to do to get this car back up and running... it previously had tonys stage 2 + turbos but i know these GC turbos produce more power. there aren't many guys i know of that can help me with mapping a jb4 in the united kingdom

many thanks
wayne
I think its better to flash MHD . I did it when upgraded RB to RB nextgen+from Robert . Ive made custom flash from twistedtuning . He can make it for JB4 if you want .
Now on 93oct (98ron in Russiya) 100-200 less than 7 secs(without meth)
Attached Images
 
Reply With Quote
(#532)
Old
Trowy88 Trowy88 is offline
New Member
 
Posts: 1
Join Date: Nov 2019
Car: 2007 E90 335i FBO hybrids
Default 11-14-2019, 06:41 PM

Hi Terry, sorry I'm new to jb4 my 07 E90 335i n54 FBO with rebuilt stock turbos with Td04 wheels, upgraded inlets about to get installed. Car has xHP stage 3 Transmission flash tune. Walbro 460 about to get installed also running E40 mix. I'm unsure what tune to run or even where to find the page where the tunes are downloaded from. Could you please link me to the appropriate tune file where I can download it please and a simple explanation as how to do so, I'd be very greatful.

Thanks,Daniel

If you can email me at:
dgtrowbridge88@hotmail.com

That'd be fantastic cheers
Reply With Quote
(#533)
Old
Haynpunch's Avatar
Haynpunch Haynpunch is offline
Senior Member
 
Posts: 574
Join Date: Jun 2017
Car: 07 E90 335i
Default 11-14-2019, 07:58 PM

Quote:
Originally Posted by Trowy88
Hi Terry, sorry I'm new to jb4 my 07 E90 335i n54 FBO with rebuilt stock turbos with Td04 wheels, upgraded inlets about to get installed. Car has xHP stage 3 Transmission flash tune. Walbro 460 about to get installed also running E40 mix. I'm unsure what tune to run or even where to find the page where the tunes are downloaded from. Could you please link me to the appropriate tune file where I can download it please and a simple explanation as how to do so, I'd be very greatful.

Thanks,Daniel

If you can email me at:
dgtrowbridge88@hotmail.com

That'd be fantastic cheers
Latest JB4 Firmware

BEF Maps / How To's can be found Here
N54 BimmerBoost MHD Back End Flash Maps - N54Tech.com - International Turbo Racing Discussion

"Hybrid Setup" can be found
JB4 N54 Hybrid Turbo Setup Directions - N54Tech.com - International Turbo Racing Discussion


07 E90 AT - xHP
JB4 G5 - Trebila BEF
FBO
Hybrids
Reply With Quote
(#534)
Old
HKD126 HKD126 is offline
Junior Member
 
Posts: 147
Join Date: Sep 2016
Car: 2014 335i
Default 11-19-2019, 06:56 PM

I have an oil pan gasket that can be put off no longer. I’m going to be swapping my OEM turbos for some RB Two Plus’s while in there. Being that it is now winter in Wisconsin can I safely drive on these turbos, running the hybrid pump BEF and map 1 until I can get properly tuned when the cold and snow disappear?
Reply With Quote
(#535)
Old
918mostwanted 918mostwanted is offline
New Member
 
Posts: 15
Join Date: Nov 2019
Car: 135i
Default 11-22-2019, 07:16 AM

Can I use the hybrid settings with a stock tmap until my 3.5 tmap comes in next week? Or will that cause issues?
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2019, N54tech.com