N54Tech.com - International Turbo Racing Discussion
(#1)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 5,379
Join Date: Oct 2013
Car: e90 335i
Default N54 AT World Record VM 6466, Jb4, Full E85 PI - 06-22-2015, 07:32 PM

Hey guys! Had a great turnout today with one of our customers. He came all the way from Texas to visit @steve@Fuel-it, @Terry@BMS and us at VM for the weekend! The car did solid today, and we actually got some pump gas numbers too!


The car is an 07 E90 AT equipped with:

VM Top Mount PTE 6466 1.00AR
CP,BOV, HPF IC Full exhaust w/ high flow cats
Fuel it Stage 3 twin 450
Motiv PI with FPR
Level 10 Valve Body and Torque Converter Upgrade

As you can see the 4 different runs here. They all had very, very clean logs from all 15 pulls.

These pulls are done WITHOUT Port Injection and Pump Gas:

17 psi on 93 only, it made 473 whp. Add a CM10 Nozzle and some meth, you can crank it up a bit.
22 Psi on 93 and meth it made 601. We didn't want to continue as we are happy with the results. It did not show any signs of slowing down though.

These pulls we turned ON the Port Injection with Full e85. We added 10 gallons of e85 to the 1 gallon left in the tank so we could turn up the boost now. Meth has been disabled for these runs.

30psi on Full e85 is when it showed timing drops. We did two runs at 30 and made consistent power and left it at that. It was a VERY hot day today, but the car performed flawless. Again, big thanks to @Terry@BMS for always being there.









Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#2)
Old
robc1976's Avatar
robc1976 robc1976 is offline
Demigod
 
Posts: 1,557
Join Date: Mar 2012
Car: 2007 335i
Default 06-22-2015, 07:45 PM

Unbelivable!


JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, VM 6466 ST, RB valve, BMS DCI, 3" AR ***, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsort, Delrin solid subfrane bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
Reply With Quote
(#3)
Old
kyle kyle is offline
New Member
 
Posts: 3
Join Date: Apr 2015
Car: e90 335i
Default 06-22-2015, 07:56 PM

congratulations, Very nice! Are you running the alpina flash? Also do you plan to see what it can do at the track anytime soon?
Reply With Quote
(#4)
Old
natedog7700's Avatar
natedog7700 natedog7700 is offline
Legend
 
Posts: 1,289
Join Date: Dec 2013
Car: 2007 bmw 335i e90 auto
Default 06-22-2015, 08:17 PM

Automatic trans....... I give it a month lol


BMW 335i
RB's 550whp
2000 Camry
2000 LS1 T56 Camaro

Koenigsegg Agera R - SOLD
Lamborghini Huracan - SOLD
2014 Bugatti Veyron - SOLD
2012 Ferrari 458 Italia - SOLD
Reply With Quote
(#5)
Old
ShocknAwe ShocknAwe is offline
Senior Member
 
Posts: 767
Join Date: Sep 2012
Car: 135i
Default 06-22-2015, 08:18 PM

Nice, 600 on 93+meth.


2010 135i M-Sport 6MT Jet Black
N54 | Build Thread
Reply With Quote
(#6)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,888
Join Date: Jan 2008
Default 06-22-2015, 08:35 PM

Car kicked ass. Jealous of that PTE 6466 G2.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#7)
Old
n54 power's Avatar
n54 power n54 power is offline
Junior Member
 
Posts: 131
Join Date: Dec 2014
Car: 335i
Default 06-22-2015, 10:07 PM

is BB flasher or MHD ??
Reply With Quote
(#8)
Old
Newguy123's Avatar
Newguy123 Newguy123 is offline
Demigod
 
Posts: 1,783
Join Date: May 2014
Car: 12' 135i
Default 06-22-2015, 10:09 PM

Sweeet! I'll bet that thing moves out on the e85 boost curve!


18 Glacier white RS3
#PURETURBOS
#FUELIT
Reply With Quote
(#9)
Old
marco_v_w marco_v_w is offline
Junior Member
 
Posts: 55
Join Date: Jan 2014
Car: 335i E91
Default 06-23-2015, 01:08 AM

Very nice guys!!
Reply With Quote
(#10)
Old
musc's Avatar
musc musc is offline
 
Posts: 770
Join Date: Jan 2008
Car: 335is DCT
Default 06-23-2015, 05:50 AM

great job guys!


335is DCT
Reply With Quote
(#11)
Old
ross22 ross22 is offline
Junior Member
 
Posts: 160
Join Date: Dec 2014
Car: 2007 BMW 335i
Default 06-23-2015, 06:17 AM

Amazing numbers congrats. This platform just keeps surprising me.
Reply With Quote
(#12)
Old
bmwboyee bmwboyee is offline
Junior Member
 
Posts: 38
Join Date: Apr 2014
Car: 2007 335
Default 06-23-2015, 06:59 AM

Can't wait to catch a ride in this rocket once it arrives back in texas.
Reply With Quote
(#13)
Old
jyamona jyamona is offline
Senior Member
 
Posts: 564
Join Date: Aug 2013
Car: 2010 135i 6MT
Default 06-23-2015, 08:34 AM

Quote:
Originally Posted by n54 power
is BB flasher or MHD ??
MHD, of course
Reply With Quote
(#14)
Old
Levan-i's Avatar
Levan-i Levan-i is offline
Senior Member
 
Posts: 642
Join Date: Sep 2014
Car: 2007 BMW 335i E92
Default 06-23-2015, 09:32 AM

omg <3 <3


2007 E92 335
ST - GTW3684
JB4 G5, ST Pump Flash, Fuel-It Stage 1, Meth
MT (after swap),
MFactory LSD
Reply With Quote
(#15)
Old
Logan's Avatar
Logan Logan is offline
Junior Member
 
Posts: 176
Join Date: Apr 2015
Car: E90' 335i
Default 06-23-2015, 09:39 AM

Quote:
Originally Posted by FastGti69
Hey guys! Had a great turnout today with one of our customers. He came all the way from Texas to visit @steve@Fuel-it, @Terry@BMS and us at VM for the weekend! The car did solid today, and we actually got some pump gas numbers too!


The car is an 07 E90 AT equipped with:

VM Top Mount PTE 6466 1.00AR
CP,BOV,HPF IC Full exhaust w/ high flow cats
Fuel it Stage 3 twin 450
Motiv PI with FPR
Level 10 Valve Body and Torque Converter Upgrade

As you can see the 4 different runs here. They all had very, very clean logs from all 15 pulls.

These pulls are done WITHOUT Port Injection and Pump Gas:

17 psi on 93 only, it made 473 whp. Add a CM10 Nozzle and some meth, you can crank it up a bit.
22 Psi on 93 and meth it made 601. We didn't want to continue as we are happy with the results. It did not show any signs of slowing down though.

These pulls we turned ON the Port Injection with Full e85. We added 10 gallons of e85 to the 1 gallon left in the tank so we could turn up the boost now. Meth has been disabled for these runs.

30psi on Full e85 is when it showed timing drops. We did two runs at 30 and made consistent power and left it at that. It was a VERY hot day today, but the car performed flawless. Again, big thanks to @Terry@BMS for always being there.
That's great! The " Hpf IC"is that with the stock c clip connection?
Reply With Quote
(#16)
Old
Race8877's Avatar
Race8877 Race8877 is offline
Junior Member
 
Posts: 437
Join Date: Apr 2015
Car: BMW 135I
Default 06-23-2015, 10:04 AM

At 30PSI 741HP with an AT / No slippage on tranny and is holding up to now.
Impressive.
Reply With Quote
(#17)
Old
knissel's Avatar
knissel knissel is offline
Junior Member
 
Posts: 92
Join Date: Jul 2013
Car: 08 335xi
Default 06-23-2015, 10:06 AM

track or die


E85 Calculator for Mobile Android iPhone
11.762 @ 118.40 (335xi Stock Turbo WR)(Totalled)
09 335i xDrive Stock (Sold)
12 GT-R BE 800 awhp 9.8 @ 139
Reply With Quote
(#18)
Old
Ando @ BMS's Avatar
Ando @ BMS Ando @ BMS is offline
BMS Customer Service
 
Posts: 738
Join Date: Jan 2013
Car: bmw 335i
Default 06-23-2015, 11:02 AM

Super!!! All I could do was 705whp with my 6465.

Tranny will hold fine on the dyno and short runs.
Runway event's kills it

Good luck though.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#19)
Old
iturbo's Avatar
iturbo iturbo is offline
Junior Member
 
Posts: 100
Join Date: Feb 2014
Car: 2009 335i e92
Default 06-23-2015, 11:14 AM

damn if only stock turbos had a more linear curve like these


2009 335i e92 n54 | FBO | JB4 | e85 flash |
Reply With Quote
(#20)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,888
Join Date: Jan 2008
Default 06-23-2015, 11:33 AM

Quote:
Originally Posted by Ando @ BMS
Super!!! All I could do was 705whp with my 6465.

Tranny will hold fine on the dyno and short runs.
Runway event's kills it

Good luck though.
Here is a comparison of yours as well as the 135i, and a VT2 car we did a few weeks ago.
Attached Images
 


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#21)
Old
kennejp's Avatar
kennejp kennejp is offline
Junior Member
 
Posts: 199
Join Date: Apr 2010
Default 06-23-2015, 12:31 PM

Amazing job! Cant wait to see some videos of it in action!


07 E92 MT RB Turbos-600whp
08 E82 Built engine/trans Speedtech ST 6466
Reply With Quote
(#22)
Old
PR3CI5N335i's Avatar
PR3CI5N335i PR3CI5N335i is offline
Need4Speed
 
Posts: 1,083
Join Date: Nov 2011
Car: 2010 E90 335i M-sport
Default 06-23-2015, 12:41 PM

Great results but I'm curious how long his AT will hold that type of power.
Reply With Quote
(#23)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,888
Join Date: Jan 2008
Default 06-23-2015, 02:29 PM

He has the torque converter and valve body, but not the trans yet. With full boost shifts I don't imagine it will last long. But we'll see.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#24)
Old
Trickcruiser's Avatar
Trickcruiser Trickcruiser is offline
Senior Member
 
Posts: 515
Join Date: Oct 2009
Car: 335i
Default 06-23-2015, 05:09 PM

Amazing results!
I am rooting for your transmission man!!!


Reply With Quote
(#25)
Old
135pats 135pats is offline
Junior Member
 
Posts: 115
Join Date: Feb 2015
Car: 135i
Default 06-23-2015, 06:34 PM

Sending good juju your way for the 6AT.

Well crap, now I want to turn the boost up too on my 6AT. waita set a bad example
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2019, N54tech.com