N54Tech.com - International Turbo Racing Discussion
(#1)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 5,097
Join Date: Oct 2013
Car: e90 335i
Default 4/2/16 No Fly Zone Results - 04-04-2016, 10:33 AM

Had a blast this time around at the 1/2 mile event. Car was running flawlessly the whole entire time! I started with some 23 psi runs, did 156mph. Turned it up a bit and hit 162, then 166, and a best of 167.9mph @ 30psi. I went about 12 times in total which was actually little compared to others 20+ runs.

This new PI integration, Spool up mode, and Vanos files from Terry@BMS has changed the car like no other. It is so much smoother now during the 1/2 mile pulls. I believe this is what mostly helped my car finally run like it's supposed to.

A couple FBO N54 were trapping about 140~
Tony came a bit late, but he still got a couple runs in too with his new car.



I wasn't going for any records to be honest. I was just very happy my engine was finally running right and not misfiring in the higher gears like before. Here is the 167.9 mph run on video. I messed up 2-3rd shift and hit rev limiter, probably cause I started the video the same time. You can see a lot of time in between shifts as well with this large turbo. I'm sure I could have greatly benefited with NLS. I feel that was mostly contributing to my misfires before as it would get the cyl hot.



Topping out 5th gear it seems too. Might have to ask Terry to bring my redline up to 7500 for these types of events.

Car Mods:
VM N54 Top Mount Kit PTE Gen 2 6870
VM Charge Pipe+ Tial BOV
VRSF 7" Intercooler
Fuel-it Stage 3 LPFP+FPR/Return system
Evolution Of Speed Intake Manifold+Port Injection
Spec Stage 3+ W/ Steel SMFW
Running Jb4+MHD+AIC
Full e85 @30 Psi Around 750whp.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#2)
Old
joeinsd joeinsd is offline
Junior Member
 
Posts: 85
Join Date: Nov 2015
Car: 2010 e92 335i msport
Default 04-04-2016, 10:40 AM

Love seeing the needle jump like that!
Reply With Quote
(#3)
Old
jtrejo jtrejo is offline
Junior Member
 
Posts: 310
Join Date: Jan 2013
Car: 535 2008
Default 04-04-2016, 11:30 AM

damn that thing pulls hard!!


2015 535 - JB4 - VRSF pipe- Burger Intake - Straight piped - MHD Backend Flash
Reply With Quote
(#4)
Old
Sered's Avatar
Sered Sered is offline
Junior Member
 
Posts: 225
Join Date: Jun 2013
Car: 10/06 E92 335i
Default 04-04-2016, 11:35 AM

Awesome! I hope I can replicate this with my 6466g2 with a bit more boost! I'll hopefully have nls and a few other goodies too.

Glad to see the new vanos maps helped you like they helped me! It's an amazing difference eh?


2008 E90 6MT sports package, VM 6466g2, BMS PI, Fuel-It Stage 3+, JB4+MHD
2009 E89 Z4 DCT, JB4, MHD flash, DCI
Reply With Quote
(#5)
Old
Steve @ BMS/Fuel-It!'s Avatar
Steve @ BMS/Fuel-It! Steve @ BMS/Fuel-It! is offline
Tuner
 
Posts: 18,440
Join Date: Oct 2012
Car: 135i
Default 04-04-2016, 11:48 AM

Very cool...you were flying. Glad to see the car is running good!



Click on our banner to visit our website!
Video of our Stage 2 LPFP upgrade installation.

BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways.
Reply With Quote
(#6)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,349
Join Date: Jan 2008
Default 04-04-2016, 11:49 AM

Impressive traps! Bummed I missed this event but will be in full force 4/23 at SS.

How did everyone else run?


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#7)
Old
jlcf22 jlcf22 is offline
Junior Member
 
Posts: 125
Join Date: Sep 2013
Car: 335i
Default 04-04-2016, 05:58 PM

I met Payam and Tony Vargas both pretty cool dudes
Reply With Quote
(#8)
Old
1hunglow 1hunglow is offline
Junior Member
 
Posts: 118
Join Date: Nov 2015
Car: 135
Default 04-04-2016, 06:08 PM

Quote:
Originally Posted by jlcf22
I met Payam and Tony Vargas both pretty cool dudes
What did those GCs do?
Reply With Quote
(#9)
Old
sA x sKy sA x sKy is offline
Junior Member
 
Posts: 222
Join Date: Jun 2011
Car: 2011 E92 335xi
Default 04-04-2016, 09:39 PM

Holy **** that's fast! Good stuff Payam!


AWE Non-Res Exhaust | AWE CF Intake | AWE ColdFront | ER ** | ER Chargepipes | JB4 Stage 3 | Custom SS Methanol | Swift Springs | TPG/DSS 1200hp Axles | Dodson Superstock DCT Clutch | PURE Stage 2 Hi-Flo
Reply With Quote
(#10)
Old
firemanjust1's Avatar
firemanjust1 firemanjust1 is offline
Junior Member
 
Posts: 162
Join Date: Oct 2013
Car: 2008 BMW 335xi
Default 04-04-2016, 09:49 PM

I love seeing the speedos buried with that setup, 100-160 mph looks scary fast !


JB4/G5 ISO ,AR **,BMS DCI,NGK 5992 BMS Meth kit dual nozzle CM 7 & 5,VRSF 7 IC, Stett chargpipe, E60 mix, 255 Walbro, Bms Race flash. RB turbos , VTT inlets ,BMS OCC, 3.5 N20 sensor, Conti DWS
Reply With Quote
(#11)
Old
iminhell1 iminhell1 is offline
Junior Member
 
Posts: 305
Join Date: Jul 2015
Car: 2010 135i
Default 04-04-2016, 11:08 PM

... and 6mpg to boot.
Reply With Quote
(#12)
Old
Jt0407 Jt0407 is offline
Junior Member
 
Posts: 303
Join Date: Feb 2015
Car: Bmw
Default 04-05-2016, 03:54 AM

Looks like someone is missing the passenger seat lol.

Nice runs!
Reply With Quote
(#13)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 5,097
Join Date: Oct 2013
Car: e90 335i
Default 04-05-2016, 06:58 AM

Quote:
Originally Posted by Jt0407
Looks like someone is missing the passenger seat lol.

Nice runs!
Car was actually full weight with passenger on all runs lol. Its my passenger seat sensor I have to get around to.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#14)
Old
Blaster400's Avatar
Blaster400 Blaster400 is offline
Junior Member
 
Posts: 120
Join Date: Jan 2013
Car: 2007 BMW 335 E92
Default 04-05-2016, 04:30 PM

Damn you have one FAST car.


JB4 G5 w/BMS MHD backend flash | MOTIV 750 | 100% E85 | MOTIV port injection | Fuel-It Stage 3+ LPFP | Akrapovic Exhaust | DSS Axles | DEFIV lockdown kit | Quaife LSD
Reply With Quote
(#15)
Old
E90Convert E90Convert is offline
Junior Member
 
Posts: 274
Join Date: Jul 2014
Car: 08 E90 335i
Default 04-05-2016, 06:34 PM

120 to 140 mph.. thats insane dude


E90 335i 6-Speed Manual
JB4 ISO G5 - BMS Pump flash - VRSF Inlets - VRSF FMIC - VRSF CP - HKS BOV - VRSF **'s - Dinan oil cooler - BMS OCC - H&R sways - Goodridge Stainless lines - ATE slotted rotors - Hawk HPS/R Pads - Apex Arc-8 17x9
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2018, N54tech.com