Problems after installing turbos -
03-26-2021, 06:41 PM
Recently installed 17T’s
I replaced the thermostat, water pump & HPFP
Also installed stage 2 LPFP
PR coils and 2 step colder plugs were installed around 1k miles ago
Car fired up the first time fine and was running fine. Did some runs and wasn’t hitting target. Went into limp mode and threw a check engine light.
CDA6 , 2E83 codes
I deleted codes and restarted the car. It started with a very rough idle and would stall if I didn’t give it gas. The fan was also on full blast. And it Threw more codes - 2B2C and 29dc