N54Tech.com - International Turbo Racing Discussion
(#1)
Old
lowelementstar lowelementstar is offline
New Member
 
Posts: 16
Join Date: Dec 2018
Car: 2010 335xi
Default New Log, PI not working - 04-23-2019, 10:43 PM

I just recently installed the pi with 750cc, stage 3 fuel pump and the jb4 pi controller. It seen like the port injection is not working. Running the st e85 pi ts thr map. Here a log, let me know know what going on.
Attached Files
File Type: csv 2019-04-23 22_48_59_Map-2.csv (9.5 KB, 35 views)
Reply With Quote
(#2)
Old
Dave @ BMS/Fuel-It!'s Avatar
Dave @ BMS/Fuel-It! Dave @ BMS/Fuel-It! is offline
Super Moderator
 
Posts: 7,911
Join Date: Apr 2014
Car: E92 335XI
Default 04-23-2019, 11:02 PM

Are you getting a meth trace line?

Double check wiring on the controller itself / make sure menu 8 is set to “0” too (unless your MT using NLS/step)


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#3)
Old
lowelementstar lowelementstar is offline
New Member
 
Posts: 16
Join Date: Dec 2018
Car: 2010 335xi
Default 04-23-2019, 11:58 PM

I see the meth on the graph but it just straight across line. I'm pretty sure the wiring all correct. Yes menu 8 is on 0. Fuel bias 50, meth scale 99. Do I need to setup anytime like trigger, etc.? Yes I do have a new anti lag chip in it.
Reply With Quote
(#4)
Old
Dave @ BMS/Fuel-It!'s Avatar
Dave @ BMS/Fuel-It! Dave @ BMS/Fuel-It! is offline
Super Moderator
 
Posts: 7,911
Join Date: Apr 2014
Car: E92 335XI
Default 04-24-2019, 10:09 PM

Quote:
Originally Posted by lowelementstar
I see the meth on the graph but it just straight across line. I'm pretty sure the wiring all correct. Yes menu 8 is on 0. Fuel bias 50, meth scale 99. Do I need to setup anytime like trigger, etc.? Yes I do have a new anti lag chip in it.
If all wiring is correct, & the correct BEF is flashed- you should be ok.

Double check wiring / all connections next.


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#5)
Old
lowelementstar lowelementstar is offline
New Member
 
Posts: 16
Join Date: Dec 2018
Car: 2010 335xi
Default 04-26-2019, 01:46 AM

Quote:
Originally Posted by Dave @ BMS/Fuel-It!
If all wiring is correct, & the correct BEF is flashed- you should be ok.

Double check wiring / all connections next.
Dave, on the log I can see the fuel enrichment but no meth trace. What could be wrong?
Attached Files
File Type: csv 2019-04-26 01_58_04_Map-2.csv (7.5 KB, 28 views)
Reply With Quote
(#6)
Old
Dave @ BMS/Fuel-It!'s Avatar
Dave @ BMS/Fuel-It! Dave @ BMS/Fuel-It! is offline
Super Moderator
 
Posts: 7,911
Join Date: Apr 2014
Car: E92 335XI
Default 04-26-2019, 06:29 AM

Quote:
Originally Posted by lowelementstar
Dave, on the log I can see the fuel enrichment but no meth trace. What could be wrong?
If meth trace isnít present - itís a wiring issue


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright © 2007 - 2020, N54tech.com