[Steve @ BMS/Fuel-It!]

Now that we are working on developing our B58 equipped 440i it became a necessity to know exactly what fuel we were running as this platform is very sensitive to the actual ethanol content. Consequently the first thing we did was to develop an ethanol sensor kit for the car that is completely plug and play.

Kit is very easy to install and retains all the stock fuel lines with no modifications needed. For install, you only need to remove two of the underbody panels, separate the stock lines, install our sensor, and connect power and ground.

At this time we are releasing 5 kits on the website at an introductory beta price. Once those are sold out and installed, we'll return the kits to normal price and re-open sales.

http://www.fuel-it.biz/f-series-240i...ensor-upgrade/

Complete Kit includes:

Two E85 compatible -6an fuel lines
Custom anodized billet fittings
Ethanol Sensor
Bluetooth Analyzer
Accessories pack

[jalkster]

Normal price as in close to the f3x n55 sensors?

[Steve @ BMS/Fuel-It!]

Normal price is listed on the website, as well as the sale price.

[Bullitt1841]

Finally!

Will this kit be a good option for plug and play compatibility for future Fuel-It products?

[Mikegpr03]

Guys please forgive me but can you fill me in on just how much E can the B58 take ? I have FBO's. Thanks in advance.

[I M inluv340]

Are you running methanol?

[Bullitt1841]

Originally Posted by Mikegpr03

Guys please forgive me but can you fill me in on just how much E can the B58 take ? I have FBO's. Thanks in advance.

I run E20-E25 with JB4 and MPPSK only, with an absolute target of 17.0 PSI flat across the RPM range. Any more boost or ethanol and I start to run too lean and just not very smooth.

Can't wait for supplemental fueling on this platform

[I M inluv340]

Originally Posted by Bullitt1841

I run E20-E25 with JB4 and MPPSK only, with an absolute target of 17.0 PSI flat across the RPM range. Any more boost or ethanol and I start to run too lean and just not very smooth.

Can't wait for supplemental fueling on this platform

I'm surprised you haven't done meth yet? Waiting for port?

[Bullitt1841]

Originally Posted by I M inluv340

I'm surprised you haven't done meth yet? Waiting for port?

I had meth on my N54 for almost a year. Too much hassle and risk for me. I would rather keep flammable fluid lines on the outside of the cabin and trunk area. TBI and PI is just so much simpler to maintain, too.

[Steve @ BMS/Fuel-It!]

Originally Posted by Bullitt1841

Finally!

Will this kit be a good option for plug and play compatibility for future Fuel-It products?

Hard to say for sure at this point but up to 600whp or so, I believe so as the fuel system configuration on this car is quite a bit different. Consequently the ethanol sensor installation and PI/TBI installation will remain completely separate.

If you want to participate in some additional testing, drop me an email and we'll discuss it.

[Steve @ BMS/Fuel-It!]

Installation video added to the first post.

[Bullitt1841]

Great video, as always, Steve! Can't wait to get this installed!