 |
|
|
|
|
New Member
|
|
Posts: 9
Join Date: Mar 2017
Car: E92
|
|
|
02-22-2019, 09:26 AM
Do these accept 48.5mm 60lb LS3 EV14 injectors
|
|
New Member
|
|
Posts: 9
Join Date: Mar 2017
Car: E92
|
|
|
02-22-2019, 10:52 AM
also Do you need the “basic” fuel-it upgrade for the line and adaptor?
Thanks
|
 |
Super Moderator
|
|
Posts: 6,167
Join Date: Oct 2013
Car: e90 335i
|
|
|
02-22-2019, 01:27 PM
Quote:
Originally Posted by biochembro
Do these accept 48.5mm 60lb LS3 EV14 injectors
|
I used LS7 injectors on mine, IIRC they're the same.
Quote:
Originally Posted by biochembro
also Do you need the “basic” fuel-it upgrade for the line and adaptor?
Thanks
|
Basic kit, is just the intake manifold, fuel rail, and hardware.
You can also purchase with injectors and fuel line kit.
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
 |
Junior Member
|
|
Posts: 54
Join Date: Jul 2017
Car: 2007 BMW 335 (E90)
|
|
|
02-25-2019, 11:10 AM
Quick question, are the gaskets (o-rings) for the manifold the same size as stock? If not, do you know the size so that I can source some for my next walnut blasting?
'07 335 sedan, Stage 2 VVT, VVT inlets/outlets, VVT DCI, Phoenix CP with Tial BV, 3.5 bar TMAP sensor, Spec twin disk clutch with SMF, BMS OCC, RB PCV valve, ***less ***, VRSF catback with Vibrant *** installed, ETS 5" intercooler, Fuel-It stage 2 fuel pump, Fuel-It 650HP LPFP upgrade with 525 pump, JB4 with custom Trebila BEF, Phoenix PI intake manifold /w 550cc injectors, Fuel-it fuel lines, ethanol sensor and analyzer
|
|
Super Moderator
|
|
Posts: 6,167
Join Date: Oct 2013
Car: e90 335i
|
|
|
02-25-2019, 11:15 AM
Quote:
Originally Posted by ifjd073
Quick question, are the gaskets (o-rings) for the manifold the same size as stock? If not, do you know the size so that I can source some for my next walnut blasting?
|
Email us and we can send you a set for $20.
Ours are made for ethanol/methanol properties, and high temp. 
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
|
Junior Member
|
|
Posts: 89
Join Date: Dec 2016
Car: 2009 E92 n54, 7''fmic, ********, jb4g5 2step relay, bms dci occ chargepipe synapse bov
|
|
|
04-08-2019, 01:21 PM
Anyone had clearance issue between cyl 1 runner and filter housing bolt
|
|
Super Moderator
|
|
Posts: 6,167
Join Date: Oct 2013
Car: e90 335i
|
|
|
04-08-2019, 01:37 PM
Quote:
Originally Posted by mattgu40
Anyone had clearance issue between cyl 1 runner and filter housing bolt
|
We've only had one issue so far crop up, he said he had to file the bolt a little.
Do you have any pictures you can email me? Payam@burgertuning.com
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
|
New Member
|
|
Posts: 4
Join Date: Feb 2016
Car: E90 335i
|
|
|
07-02-2019, 07:43 AM
Have you seen any HP / Flow gains with these manifolds @BMS?
|
|
Super Moderator
|
|
Posts: 6,167
Join Date: Oct 2013
Car: e90 335i
|
|
|
07-02-2019, 10:49 AM
Quote:
Originally Posted by WOT808
Have you seen any HP / Flow gains with these manifolds @BMS?
|
I've tested 3 intake manifolds that are out in the market and non of them have showed any gains. This is more for integrated PI as well as an aluminum intake manifold.
You don't want it to blow up like this during a 1/2 mile race event 
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
|
New Member
|
|
Posts: 4
Join Date: Feb 2016
Car: E90 335i
|
|
|
07-02-2019, 11:14 AM
Quote:
Originally Posted by Payam @ BMS
I've tested 3 intake manifolds that are out in the market and non of them have showed any gains. This is more for integrated PI as well as an aluminum intake manifold.
You don't want it to blow up like this during a 1/2 mile race event |
What caused your manifold to split?
My stock manifold shattered on a 3 to 4 shift. |
 |
Tuner
|
|
Posts: 32,877
Join Date: Jan 2008
|
|
|
07-02-2019, 01:35 PM
Backfire + lots of boost ruined my track day! =/
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
 |
Senior Member
|
|
Posts: 610
Join Date: Jul 2011
Car: 2008 535i
|
|
|
07-25-2019, 07:11 PM
I've had mine on for 35,000 miles now with no issues to note. Seems to be holding up great.
Visit Chadillac2000's 2008 135i Road Warrior Daily Driver Single Turbo Build Thread HERE
ACF PTE 6062 BB Top Mount ST Kit, Fuel-It! Stage 3 LPFP, Phoenix Racing Port Injection Manifold + RACE FMIC, JB4 + BMS ST E85 PI BEF
|
|
Junior Member
|
|
Posts: 40
Join Date: Apr 2015
Car: E92 335i
|
|
|
09-13-2019, 11:47 AM
Quote:
Originally Posted by Terry @ BMS
Hey guys,
Phoenix accidentally sent us an aluminum N54 intake without the port injection ports. Good for doing something custom, just a stronger higher flowing replacement, etc. Willing to part with it for $500 shipped.
|
You don't happen to still have this one do you ? |
|
Super Moderator
|
|
Posts: 6,167
Join Date: Oct 2013
Car: e90 335i
|
|
|
09-16-2019, 11:41 AM
Quote:
Originally Posted by datbimmer
You don't happen to still have this one do you ?
|
No, sold a long time ago.
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Copyright © 2007 - 2020, N54tech.com
|
