N54Tech.com - International Turbo Racing Discussion
dani335i dani335i is offline
New Member
Posts: 20
Join Date: Aug 2014
Car: 335i
Default A lot of timing corrections - 07-30-2019, 02:05 PM

Hello guys

I've some problems with my car since view months.

I've a lot of timing corrections on low boost. before i run up to 28psi without any issues. Logs are made with 100 or 102 octane pump gas here in switzerland. No Portinjection is running, i've only installed the stage 4 pump and Pi, but i never turned on the PI.

Please check out my log here:

Specifiaction to my car: i've stage 2 turbos from PNP/Kotte, same size like pure st2. Fuel it port injection stage 4, ******* ********, 200cell cats in the middle.
NGK spark plugs 0,55mm gapped. Car has now 25'000km on it.

I've also some issues, when the car is standing for 1 or 2 day,after i start the car an will drive away in R or D1, the car is shutting down. the car jolts and gets too little or too much fuel. Please check also out this log during the start up and drive away.

Please check also out this log : https://***********/u/danhexon/start...?log=0&data=20

I do not know what is the issue. Maybe leaked injector from the PI ? Wrong setting from the FPR in the Portinjection (but never started the PI)? The ground from the AIC6 controller was connected to the knock sensor, maybe that was the issue and knock sensor is damaged??
Reply With Quote
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Posts: 33,323
Join Date: Jan 2008
Default 08-03-2019, 09:56 AM

We don't use 3rd party apps here so attach the JB4 log directly. If it's not a JB4 log, won't be able to help in this forum.

Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2020, N54tech.com