N54Tech.com - International Turbo Racing Discussion
(#1)
Old
alexpanteaa alexpanteaa is offline
New Member
 
Posts: 6
Join Date: Oct 2020
Car: 2019 BMW M5 competition
Default BMS WMI Kit F90 Help - 10-07-2020, 06:50 AM

Hello, I've been running a stage 3 DME Tuning tune with the JB4 as a piggyback as well. On map 5 (27psi absolute profile) and Octane 100+ the car used to run 10.3-10.4 Quarter mile and 6.5-7 second 60-130s. After installing the BMS Meth kit with the MSR Racing meth plates that mount above the throttle body underneath the charge air coolers, the car seems to be running a lot slower. Best 60-130 I have gotten since I installed the kit was a 6.96 60-130 on octane 100+ and map 5 (27psi absolute profile) I am using the same nozzles and same parts, the injection location is just different, that's all. Anyone can advise me on what to do ? Does the DME tune possibly affect it ? I'll attach a picture of a the log for the 6.96 60-130. Please let me know, Thanks !
Attached Images
 
Reply With Quote
(#2)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 32,614
Join Date: Jan 2008
Default 10-07-2020, 09:59 AM

Post up the CSV!


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#3)
Old
alexpanteaa alexpanteaa is offline
New Member
 
Posts: 6
Join Date: Oct 2020
Car: 2019 BMW M5 competition
Default 10-07-2020, 10:51 AM

Quote:
Originally Posted by Terry @ BMS
Post up the CSV!
Here it is.
Attached Files
File Type: csv P24_M5_R1_201005_000957.csv (7.2 KB, 12 views)
Reply With Quote
(#4)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 32,614
Join Date: Jan 2008
Default 10-07-2020, 01:18 PM

For kicks set meth trigger = 1 and log map3 for comparison's sake


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#5)
Old
alexpanteaa alexpanteaa is offline
New Member
 
Posts: 6
Join Date: Oct 2020
Car: 2019 BMW M5 competition
Default 10-07-2020, 09:34 PM

Quote:
Originally Posted by Terry @ BMS
For kicks set meth trigger = 1 and log map3 for comparison's sake
Meth trigger was set to 1. Here is the CSV on map 3. Ran a 7.38 on this log
Attached Files
File Type: csv P24_M3_R1_201008_002822.csv (10.4 KB, 14 views)
Reply With Quote
(#6)
Old
luchocamp's Avatar
luchocamp luchocamp is offline
Senior Member
 
Posts: 696
Join Date: Jun 2016
Car: 2013 BMW 335i xdrive M Sport
Default 10-08-2020, 02:48 AM

Could you upload .csv when your car was running 6.5sec before the installation of Meth plates to compare.



13 BMW 335ix Full Weight 10.64 @129mph N55 WR SOLD
A90 Supra Full Weight No Nitrous 10.78@133mph
BMW M4 10.69@133mph Full Weight stock turbos

drag track online set up contact on Instagram @luchocampusano YouTube Lucho Campusano
Reply With Quote
(#7)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 32,614
Join Date: Jan 2008
Default 10-08-2020, 02:16 PM

Quote:
Originally Posted by alexpanteaa
Meth trigger was set to 1. Here is the CSV on map 3. Ran a 7.38 on this log
Set FF to 60 and relog!


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#8)
Old
alexpanteaa alexpanteaa is offline
New Member
 
Posts: 6
Join Date: Oct 2020
Car: 2019 BMW M5 competition
Default 10-09-2020, 12:08 AM

Quote:
Originally Posted by Terry @ BMS
Set FF to 60 and relog!
Set FF/Wastegate adaptation under User adjustable map to 60. Ran a 7.88. Attached is the CSV Log.
Attached Files
File Type: csv P24_M7_R1_201009_015136.csv (7.6 KB, 11 views)
Reply With Quote
(#9)
Old
alexpanteaa alexpanteaa is offline
New Member
 
Posts: 6
Join Date: Oct 2020
Car: 2019 BMW M5 competition
Default 10-09-2020, 12:10 AM

Quote:
Originally Posted by luchocamp
Could you upload .csv when your car was running 6.5sec before the installation of Meth plates to compare.
Here is the 6.75 log. Donít have the 6.5 one, got a new phone. This was back in the summer, so IATs were higher. Iím located in Michigan so the weather now is around 50-60į F. The car was not on meth at this time, just octane 100+ and 27psi map
Attached Files
File Type: csv P24_M5_R1_200830_212820 6.75 60-130!!.csv (9.5 KB, 12 views)
Reply With Quote
(#10)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 32,614
Join Date: Jan 2008
Default 10-09-2020, 01:01 PM

Quote:
Originally Posted by alexpanteaa
Set FF/Wastegate adaptation under User adjustable map to 60. Ran a 7.88. Attached is the CSV Log.
It's back to map7 which is running stock boost levels with your additive = 0 settings...

FF = 60, map3 log.


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#11)
Old
alexpanteaa alexpanteaa is offline
New Member
 
Posts: 6
Join Date: Oct 2020
Car: 2019 BMW M5 competition
Default 10-09-2020, 02:42 PM

Quote:
Originally Posted by Terry @ BMS
It's back to map7 which is running stock boost levels with your additive = 0 settings...

FF = 60, map3 log.
Hereís map 3 again. 7.66
Attached Files
File Type: csv P24_M3_R1_201009_015345 MAP 3!.csv (7.8 KB, 10 views)
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright © 2007 - 2020, N54tech.com