N54Tech.com - International Turbo Racing Discussion
Go Back   N54Tech.com - International Turbo Racing Discussion > Model-Specific Engine Tuning & Modification Discussion > N54
Reload this Page *NEW* hybrid turbo stage 3 kit – MM Performance Parts
View Poll Results: Would you buy these turbos?
Yes 127 80.89%
No 30 19.11%
Voters: 157. You may not vote on this poll

Reply
 
Thread Tools Search this Thread Display Modes
(#51)
Old
Mauricio @ MMP's Avatar
Mauricio @ MMP Mauricio @ MMP is offline
Junior Member
 
Posts: 478
Join Date: Aug 2009
Car: 335i Cp TiAg JB3 DCI
Default 03-27-2015, 02:21 PM

Quick update for you guys. 2nd turbo is at the manufacturer getting adjustments. Charge pipe turbo to intercooler is at the fabricators. Received custom data acquisition system for testing. Taking a bit longer than hoped at turbo manufacturer but hopefully will have them in by the end of April ready to be installed.


Stock Turbo 500whp 540wtq with MMP inlets
http://mmp-e.com
  • inlets (high flow and one piece silicone)
  • high flow outlets
  • turbo development
Reply With Quote
(#52)
Old
Mauricio @ MMP's Avatar
Mauricio @ MMP Mauricio @ MMP is offline
Junior Member
 
Posts: 478
Join Date: Aug 2009
Car: 335i Cp TiAg JB3 DCI
Default 03-31-2015, 05:03 PM

updated the pricing section in the first post. Twin turbos will only be $3k when ready to sell in the summer . Read the first post pricing sub section.


Stock Turbo 500whp 540wtq with MMP inlets
http://mmp-e.com
  • inlets (high flow and one piece silicone)
  • high flow outlets
  • turbo development
Reply With Quote
(#53)
Old
frmtl2_335i's Avatar
frmtl2_335i frmtl2_335i is offline
Junior Member
 
Posts: 305
Join Date: Mar 2013
Car: 07 e92 M/T
Default 03-31-2015, 05:15 PM

Quote:
Originally Posted by slicksilver
updated the pricing section in the first post. Twin turbos will only be $3k when ready to sell in the summer . Read the first post pricing sub section.
Someone is about to become rich as soon as dyno sheets are posted


FFTEC 6466 Gen2, MHD Flash Tuned by Wedge, BMS PI Kit, FUEL-IT Stg 3 pump, HALTECH PS-1000, MFactory LSD w/lock down brace, ECS Trailing Arms, M3 control arms, M3 brace, DGR Coilovers, N20 tmap sensor, BMS OCC, VRSF exhaust w/4" tips, VRSF CP, Tial BOV. BigTom FMIC, Msport front & rear, m3 sides skirts.
12.23 @ 118.9mph (RBs)
2.3 60' lol (single pass night, bog shifting)
Reply With Quote
(#54)
Old
mitchg53 mitchg53 is offline
New Member
 
Posts: 8
Join Date: Mar 2015
Car: 335
Default 03-31-2015, 09:53 PM

I think I may have to open up my wallet for this one...
Reply With Quote
(#55)
Old
Hellkite Hellkite is offline
Junior Member
 
Posts: 78
Join Date: Jul 2012
Car: 09135i
Default 04-05-2015, 06:56 PM

Are you doing a pre order or a group buy. I am serious, how long. I need turbos soon.
Reply With Quote
(#56)
Old
Mauricio @ MMP's Avatar
Mauricio @ MMP Mauricio @ MMP is offline
Junior Member
 
Posts: 478
Join Date: Aug 2009
Car: 335i Cp TiAg JB3 DCI
Default 04-05-2015, 06:57 PM

sorry, not ready for that, lot of testing to do first. Cant put out a product that is not thoroughly tested.


Stock Turbo 500whp 540wtq with MMP inlets
http://mmp-e.com
  • inlets (high flow and one piece silicone)
  • high flow outlets
  • turbo development
Reply With Quote
(#57)
Old
Hellkite Hellkite is offline
Junior Member
 
Posts: 78
Join Date: Jul 2012
Car: 09135i
Default 04-05-2015, 08:02 PM

Quote:
Originally Posted by slicksilver
sorry, not ready for that, lot of testing to do first. Cant put out a product that is not thoroughly tested.
How much longer are we looking at? Will there be core charges? I cant seem to find your web site i would like to see your other products.
Reply With Quote
(#58)
Old
Mauricio @ MMP's Avatar
Mauricio @ MMP Mauricio @ MMP is offline
Junior Member
 
Posts: 478
Join Date: Aug 2009
Car: 335i Cp TiAg JB3 DCI
Default 04-06-2015, 08:20 PM

Quote:
Originally Posted by Hellkite
How much longer are we looking at? Will there be core charges? I cant seem to find your web site i would like to see your other products.
no website yet, working on it. Take orders through email only/paypal for now. I only sell the MMP intakes for now and the hybrid turbos will be my second product. I think the turbos will be ready for general market sale in June/July after extensive testing on my car and a few other beta tester.


Stock Turbo 500whp 540wtq with MMP inlets
http://mmp-e.com
  • inlets (high flow and one piece silicone)
  • high flow outlets
  • turbo development
Reply With Quote
(#59)
Old
MASTA MASTA is offline
Junior Member
 
Posts: 94
Join Date: Sep 2012
Default we have a finished product - 04-08-2015, 05:35 AM

we have a finished product in Russia!

price 3000$

http://turbo-tech.ru



https://instagram.com/p/1LQgp2l_Df/?...=kkperformance
Reply With Quote
(#60)
Old
JacksColon's Avatar
JacksColon JacksColon is offline
New Member
 
Posts: 9
Join Date: Jun 2014
Car: BMW 335i
Default 04-08-2015, 05:42 AM

to much troll, why not make your own thread for the product.
Reply With Quote
(#61)
Old
frmtl2_335i's Avatar
frmtl2_335i frmtl2_335i is offline
Junior Member
 
Posts: 305
Join Date: Mar 2013
Car: 07 e92 M/T
Default 04-08-2015, 05:44 AM

Quote:
Originally Posted by MASTA
we have a finished product in Russia!

price 3000$

http://turbo-tech.ru



https://instagram.com/p/1LQgp2l_Df/?...=kkperformance
Why would they restrict the compressor side like that?


FFTEC 6466 Gen2, MHD Flash Tuned by Wedge, BMS PI Kit, FUEL-IT Stg 3 pump, HALTECH PS-1000, MFactory LSD w/lock down brace, ECS Trailing Arms, M3 control arms, M3 brace, DGR Coilovers, N20 tmap sensor, BMS OCC, VRSF exhaust w/4" tips, VRSF CP, Tial BOV. BigTom FMIC, Msport front & rear, m3 sides skirts.
12.23 @ 118.9mph (RBs)
2.3 60' lol (single pass night, bog shifting)
Reply With Quote
(#62)
Old
Mauricio @ MMP's Avatar
Mauricio @ MMP Mauricio @ MMP is offline
Junior Member
 
Posts: 478
Join Date: Aug 2009
Car: 335i Cp TiAg JB3 DCI
Default 04-08-2015, 11:58 AM

Quote:
Originally Posted by MASTA
we have a finished product in Russia!
Please make your own thread. I would love to discuss with you your turbos in your own thread to find out more about them. Website is all in russian


Stock Turbo 500whp 540wtq with MMP inlets
http://mmp-e.com
  • inlets (high flow and one piece silicone)
  • high flow outlets
  • turbo development
Reply With Quote
(#63)
Old
Luke0818's Avatar
Luke0818 Luke0818 is offline
Junior Member
 
Posts: 247
Join Date: Oct 2013
Car: 335i
Default 04-10-2015, 08:58 AM

Can't wait. My wastegates are starting to rattle. Will these turbos have updated wastegates?


2008 e93 MODS: BMS JB4 G5 ISO, bms trunk, RB PVC, Lukeperformance flash, mount meth kit, OCC, ******* ********, VRSF 7" FMIC, charge pipe, DCI, Alpina flash,
Reply With Quote
(#64)
Old
mitchg53 mitchg53 is offline
New Member
 
Posts: 8
Join Date: Mar 2015
Car: 335
Default 04-13-2015, 10:45 PM

Do you think this kit can run 500whp on just 93? No meth.
Reply With Quote
(#65)
Old
Torgus Torgus is offline
Junior Member
 
Posts: 496
Join Date: Jul 2013
Car: 335xi
Default 04-14-2015, 08:32 AM

Quote:
Originally Posted by mitchg53
Do you think this kit can run 500whp on just 93? No meth.
my guess would be no chance at all.

Seeing as how most 93 tunes are around 400whp. 93 w/ RBs is 430-440 tops. Also remember it just touches the peak whp for like 100rpms and then drops off.

I don't see this adding 100whp on just pump 93. On 93 w/ meth with upgraded inlets sure.


E92 ACF 6466 + AM Meth / E70 #1 / E70 #2 JBD

Got Boost?

Last edited by Torgus; 04-14-2015 at 08:45 AM..
Reply With Quote
(#66)
Old
Mauricio @ MMP's Avatar
Mauricio @ MMP Mauricio @ MMP is offline
Junior Member
 
Posts: 478
Join Date: Aug 2009
Car: 335i Cp TiAg JB3 DCI
Default 04-14-2015, 01:43 PM

yes, I think 500whp with 93 only on my upgraded hybrid turbo kit is definitely possible with these turbos. I intend to test and find out. Will test 93 only, 93+meth, E85 only, e85+meth.


Stock Turbo 500whp 540wtq with MMP inlets
http://mmp-e.com
  • inlets (high flow and one piece silicone)
  • high flow outlets
  • turbo development
Reply With Quote
(#67)
Old
Torgus Torgus is offline
Junior Member
 
Posts: 496
Join Date: Jul 2013
Car: 335xi
Default 04-14-2015, 01:45 PM

Quote:
Originally Posted by slicksilver
yes, I think 500whp with 93 only on my upgraded hybrid turbo kit is definitely possible with these turbos. I intend to test and find out. Will test 93 only, 93+meth, E85 only, e85+meth.
I hope you are right!


E92 ACF 6466 + AM Meth / E70 #1 / E70 #2 JBD

Got Boost?
Reply With Quote
(#68)
Old
tjobeid tjobeid is offline
Junior Member
 
Posts: 195
Join Date: Jun 2013
Car: 07 335i coupe
Default 04-14-2015, 11:37 PM

ill be testing them for 50%-100% e85 no meth for you hehe. How we looking as far as ETA for the prototype to install on your car
Reply With Quote
(#69)
Old
sirfredi's Avatar
sirfredi sirfredi is offline
Junior Member
 
Posts: 123
Join Date: Jan 2013
Default 04-15-2015, 04:21 AM

turbotech.....

if you buy these turbos, when you break the shaft as my turbo with only 400kms say it's your fault and not give warranty.
NEVER MORE! black list for life

Last edited by sirfredi; 04-15-2015 at 04:31 AM..
Reply With Quote
(#70)
Old
Rob@RBTurbo's Avatar
Rob@RBTurbo Rob@RBTurbo is offline
Stalker
 
Posts: 4,030
Join Date: Feb 2009
Car: 335I
Default 04-15-2015, 09:15 AM

Quote:
Originally Posted by sirfredi
turbotech.....

if you buy these turbos, when you break the shaft as my turbo with only 400kms say it's your fault and not give warranty.
NEVER MORE! black list for life
Never heard of a Turbotech, but "warranty support" (regardless of root fault) is something often that must be as accommodating as possible by the manufacturer… and going with no names can lead to very poor support at times.

Rob


See www.rbturbo.com for N54 Twin Turbo Bolt-On upgrades, or contact directly 314-630-8950 rob.rbturbo@gmail.com for a price quote.
Reply With Quote
(#71)
Old
Mauricio @ MMP's Avatar
Mauricio @ MMP Mauricio @ MMP is offline
Junior Member
 
Posts: 478
Join Date: Aug 2009
Car: 335i Cp TiAg JB3 DCI
Default 04-15-2015, 09:21 AM

Quote:
Originally Posted by tjobeid
ill be testing them for 50%-100% e85 no meth for you hehe. How we looking as far as ETA for the prototype to install on your car
In process, expect to receive end of this month, early next. Had a 1 month delay because I decided with the manufacturer to do something new that has never been done on these hybrid turbos regarding the manufacturing process and quality. Not ready to give details now but will be pretty cool once info on this is released

Quote:
Originally Posted by sirfredi
turbotech.....

if you buy these turbos, when you break the shaft as my turbo with only 400kms say it's your fault and not give warranty.
NEVER MORE! black list for life
Haven't heard of them. So they provide warranty for aftermarket turbos on your car?

Quote:
Originally Posted by Rob@RBTurbo
Never heard of a Turbotech, but "warranty support" (regardless of root fault) is something often that must be as accommodating as possible by the manufacturer… and going with no names can lead to very poor support at times.

Rob
I will be providing warranty and customer service support, 1 yr warranty as is standard for these products in this market space. Not sure if that was a dig on me Rob. If not, just ignore my comment about Dig.


Stock Turbo 500whp 540wtq with MMP inlets
http://mmp-e.com
  • inlets (high flow and one piece silicone)
  • high flow outlets
  • turbo development
Reply With Quote
(#72)
Old
Rob@RBTurbo's Avatar
Rob@RBTurbo Rob@RBTurbo is offline
Stalker
 
Posts: 4,030
Join Date: Feb 2009
Car: 335I
Default 04-15-2015, 09:45 AM

Quote:
Originally Posted by slicksilver
I will be providing warranty and customer service support, 1 yr warranty as is standard for these products in this market space. Not sure if that was a dig on me Rob. If not, just ignore my comment about Dig.
Not a dig on you. You'd have to sell turbos that you end up not supporting (for whatever reason) for it to even remotely apply. Had to do with the no name the guy mentioned above.

Rob


See www.rbturbo.com for N54 Twin Turbo Bolt-On upgrades, or contact directly 314-630-8950 rob.rbturbo@gmail.com for a price quote.
Reply With Quote
(#73)
Old
mitchg53 mitchg53 is offline
New Member
 
Posts: 8
Join Date: Mar 2015
Car: 335
Default 04-16-2015, 10:55 AM

Quote:
Originally Posted by slicksilver
yes, I think 500whp with 93 only on my upgraded hybrid turbo kit is definitely possible with these turbos. I intend to test and find out. Will test 93 only, 93+meth, E85 only, e85+meth.
Thank you! Finally someone willing to test 93 only. I hate running meth and don't have e85 available.
Reply With Quote
(#74)
Old
Levan-i's Avatar
Levan-i Levan-i is offline
Senior Member
 
Posts: 642
Join Date: Sep 2014
Car: 2007 BMW 335i E92
Default 04-16-2015, 10:56 AM

Quote:
Originally Posted by mitchg53
Thank you! Finally someone willing to test 93 only. I hate running meth and don't have e85 available.
why do you hate to run meth?


2007 E92 335
ST - GTW3684
JB4 G5, ST Pump Flash, Fuel-It Stage 1, Meth
MT (after swap),
MFactory LSD
Reply With Quote
(#75)
Old
Peter @ Pure's Avatar
Peter @ Pure Peter @ Pure is offline
Demigod
 
Posts: 1,688
Join Date: Aug 2013
Car: F20 M135i
Default 04-16-2015, 11:35 AM

Quote:
Originally Posted by Levan-i
why do you hate to run meth?
Indeed whats wrong with being a meth head?


F21 M140i - 100-200: 5.18 60-130: 5.96
Audi TTRS - 100-200: 4.01 60-130: 4.5
F80 M3 - 100-200: 4.32, 60-130: 4.8
F20 M135i (sold) - 100-200: 6.26 , 60-130: 7.4
peter@pureturbos.eu
peter@pureturbos.com
peter@protuningfreaks.com
pureturbos.eu
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright © 2007 - 2020, N54tech.com