N54Tech.com - International Turbo Racing Discussion
(#4401)
Old
Seef824 Seef824 is offline
New Member
 
Posts: 4
Join Date: Jun 2021
Car: Kia Stinger GT
Default 06-20-2021, 05:07 PM

Quote:
Originally Posted by Jaybone
What does the code say is the issue? What are your plugs gapped at?
PCM error. The code with JB4 said no information. Google returns a PCM fault that appears to be related to the transmission and requested vs actual torque or MAF issues (which we dont have MAF, so not sure how that relates to throttle).

edit: plugs (denso) are gapped at 0.022.

Last edited by Seef824; 06-20-2021 at 05:22 PM..
Reply With Quote
(#4402)
Old
Chanluder's Avatar
Chanluder Chanluder is offline
Junior Member
 
Posts: 68
Join Date: Apr 2021
Car: Stinger
Default 06-20-2021, 05:25 PM

Something is wrong with the JB4 connection.
Reply With Quote
(#4403)
Old
Seef824 Seef824 is offline
New Member
 
Posts: 4
Join Date: Jun 2021
Car: Kia Stinger GT
Default 06-20-2021, 05:28 PM

Quote:
Originally Posted by Chanluder
Something is wrong with the JB4 connection.
Do you know of anything I can check? When I looked under the hood, everything looked good.
Reply With Quote
(#4404)
Old
Chanluder's Avatar
Chanluder Chanluder is offline
Junior Member
 
Posts: 68
Join Date: Apr 2021
Car: Stinger
Default 06-20-2021, 05:39 PM

Check the JB4 pins. If those checked out, reach to Terry. Might be something wrong with JB4 itself.
Reply With Quote
(#4405)
Old
Seef824 Seef824 is offline
New Member
 
Posts: 4
Join Date: Jun 2021
Car: Kia Stinger GT
Default 06-20-2021, 05:54 PM

Quote:
Originally Posted by Chanluder
Check the JB4 pins. If those checked out, reach to Terry. Might be something wrong with JB4 itself.
I just rechecked all of the wire routing. No wires are pinched or rubbing on anything. I used to manage harness wiring on large equipment, so I took extra time during the install to ensure I routed and retained the JB4 harness and fuel wires away from heat and sharp points as best as possible.

I am not sure what the wiring schematic is for the JB4, but I could check that if it is available.

Is support email the best way to get hold of Terry? or is there another contact method?
Reply With Quote
(#4406)
Old
rbjohnson78 rbjohnson78 is offline
New Member
 
Posts: 13
Join Date: Dec 2020
Car: Kia Stinger 3.3
Default 06-21-2021, 08:51 AM

Quote:
Originally Posted by Jaybone
Yes I would go to map 0 and check those before attempting anything else. Make sure to use the feeler style gap tool so you don't damage the tips.
I pulled the negative for about 15 min or so, and did a run on map 0. Looked a lot better. Did a quick pull on map 1 and I think it still looks ok. I have the csv if you wouldn't mind checking again to see if anything pops out to you. It will be my last pull before checking the plugs. Thanks for all the help!
Attached Files
File Type: csv P21-M1-R1-210621-0720.csv (10.2 KB, 41 views)
Reply With Quote
(#4407)
Old
Jaybone Jaybone is offline
Junior Member
 
Posts: 219
Join Date: Apr 2021
Car: 2020 Kia Stinger GT1 AWD
Default 06-21-2021, 09:03 AM

Quote:
Originally Posted by Seef824
I just rechecked all of the wire routing. No wires are pinched or rubbing on anything. I used to manage harness wiring on large equipment, so I took extra time during the install to ensure I routed and retained the JB4 harness and fuel wires away from heat and sharp points as best as possible.

I am not sure what the wiring schematic is for the JB4, but I could check that if it is available.

Is support email the best way to get hold of Terry? or is there another contact method?

support@burgertuning.com
Reply With Quote
(#4408)
Old
Jaybone Jaybone is offline
Junior Member
 
Posts: 219
Join Date: Apr 2021
Car: 2020 Kia Stinger GT1 AWD
Default 06-21-2021, 09:18 AM

Quote:
Originally Posted by rbjohnson78
I pulled the negative for about 15 min or so, and did a run on map 0. Looked a lot better. Did a quick pull on map 1 and I think it still looks ok. I have the csv if you wouldn't mind checking again to see if anything pops out to you. It will be my last pull before checking the plugs. Thanks for all the help!

Looks good re log in a couple days and if timing is bad again pull plugs and check


2020 Stinger GT1 AWD CERAMIC SILVER W/RED INTERIOR
JB4 W/FUEL WIRES & EWG WIRES
BMS INTAKES
BMS WMI KIT
BMS OCC
FUEL IT FLEX FUEL KIT
BORLA EXHAUST
STOPTECH FRONT AND REAR PADS
DENSO 5346
SEIBON CARBON FIBER OEM HOOD
NICHE 20" WHEELS MATTE BRONZE
LLUMAR STRATOS CERAMIC WINDOW TINT
STEK DYNOSHIELD FULL FRONT CLEAR BRA
CERAMIC PRO SILVER PACKAGE
OEM PUDDLE LIGHTS INSTALLED AFTERMARKET
OEM FRONT AND REAR SPLASH GUARDS
DRONE MOBILE REMOTE START
Reply With Quote
(#4409)
Old
stinger38 stinger38 is offline
New Member
 
Posts: 3
Join Date: Jun 2021
Car: Kia Stinger
Default 06-21-2021, 10:01 AM

Would appreciate a log check. Second time owning a JB4 for my car, but this time around it doesn't feel as smooth and feels rough (ever so slightly) at partial throttle. The car feels better with more throttle applied then less.

Log is done on Map1, 91 oct(with a gallon of e85 - was previously testing if the roughness was octane related) vehicle is stock with new Denso 5346 IKH24 plugs.
Attached Files
File Type: csv P21_M1_R1_210621_0820.csv (8.2 KB, 56 views)
Reply With Quote
(#4410)
Old
rbjohnson78 rbjohnson78 is offline
New Member
 
Posts: 13
Join Date: Dec 2020
Car: Kia Stinger 3.3
Default 06-21-2021, 10:50 AM

Quote:
Originally Posted by Jaybone
Looks good re log in a couple days and if timing is bad again pull plugs and check
Thank you for checking! I really appreciate it!
Reply With Quote
(#4411)
Old
rbjohnson78 rbjohnson78 is offline
New Member
 
Posts: 13
Join Date: Dec 2020
Car: Kia Stinger 3.3
Default map6tuning log - 06-22-2021, 10:57 AM

I sent in my map 2 log and got the message below back. Any concerns with this, or something I should check?

Boost1 and Boost2 To far apart B1: 11.5 B2 3.1 8.4 TS: 2302.75
Reply With Quote
(#4412)
Old
Jaybone Jaybone is offline
Junior Member
 
Posts: 219
Join Date: Apr 2021
Car: 2020 Kia Stinger GT1 AWD
Default 06-22-2021, 01:07 PM

Quote:
Originally Posted by stinger38
Would appreciate a log check. Second time owning a JB4 for my car, but this time around it doesn't feel as smooth and feels rough (ever so slightly) at partial throttle. The car feels better with more throttle applied then less.

Log is done on Map1, 91 oct(with a gallon of e85 - was previously testing if the roughness was octane related) vehicle is stock with new Denso 5346 IKH24 plugs.

You have horrible timing. The worst I have ever seen! What are your plugs gapped at?


2020 Stinger GT1 AWD CERAMIC SILVER W/RED INTERIOR
JB4 W/FUEL WIRES & EWG WIRES
BMS INTAKES
BMS WMI KIT
BMS OCC
FUEL IT FLEX FUEL KIT
BORLA EXHAUST
STOPTECH FRONT AND REAR PADS
DENSO 5346
SEIBON CARBON FIBER OEM HOOD
NICHE 20" WHEELS MATTE BRONZE
LLUMAR STRATOS CERAMIC WINDOW TINT
STEK DYNOSHIELD FULL FRONT CLEAR BRA
CERAMIC PRO SILVER PACKAGE
OEM PUDDLE LIGHTS INSTALLED AFTERMARKET
OEM FRONT AND REAR SPLASH GUARDS
DRONE MOBILE REMOTE START
Reply With Quote
(#4413)
Old
Jaybone Jaybone is offline
Junior Member
 
Posts: 219
Join Date: Apr 2021
Car: 2020 Kia Stinger GT1 AWD
Default 06-22-2021, 01:11 PM

Quote:
Originally Posted by rbjohnson78
I sent in my map 2 log and got the message below back. Any concerns with this, or something I should check?

Boost1 and Boost2 To far apart B1: 11.5 B2 3.1 8.4 TS: 2302.75
Who said that?


2020 Stinger GT1 AWD CERAMIC SILVER W/RED INTERIOR
JB4 W/FUEL WIRES & EWG WIRES
BMS INTAKES
BMS WMI KIT
BMS OCC
FUEL IT FLEX FUEL KIT
BORLA EXHAUST
STOPTECH FRONT AND REAR PADS
DENSO 5346
SEIBON CARBON FIBER OEM HOOD
NICHE 20" WHEELS MATTE BRONZE
LLUMAR STRATOS CERAMIC WINDOW TINT
STEK DYNOSHIELD FULL FRONT CLEAR BRA
CERAMIC PRO SILVER PACKAGE
OEM PUDDLE LIGHTS INSTALLED AFTERMARKET
OEM FRONT AND REAR SPLASH GUARDS
DRONE MOBILE REMOTE START
Reply With Quote
(#4414)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 33,749
Join Date: Jan 2008
Default 06-22-2021, 02:02 PM

Hey guys, I'm back home (had a fun hospital stay after unexpected internal bleeding during a routine procedure) but have limited energy so won't be doing a ton of forum or email. Will keep up where I can. Steve is manning the forums and you can always email support@burgertuning.com or payam@burgertuning.com if you need a quicker response. I'm able to do around 100 emails a day (1/3 my normal load) so will keep up where I can.


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#4415)
Old
Jaybone Jaybone is offline
Junior Member
 
Posts: 219
Join Date: Apr 2021
Car: 2020 Kia Stinger GT1 AWD
Default 06-22-2021, 02:23 PM

Quote:
Originally Posted by Terry @ BMS
Hey guys, I'm back home (had a fun hospital stay after unexpected internal bleeding during a routine procedure) but have limited energy so won't be doing a ton of forum or email. Will keep up where I can. Steve is manning the forums you can always email support@burgertuning.com or payam@burgertuning.com if you need a quicker response. I'm able to do around 100 emails a day (1/3 my normal load) so will keep up where I can.

Rest up Terry hope you get better soon! We need you healthy to keep making fun goodies for our cars!


2020 Stinger GT1 AWD CERAMIC SILVER W/RED INTERIOR
JB4 W/FUEL WIRES & EWG WIRES
BMS INTAKES
BMS WMI KIT
BMS OCC
FUEL IT FLEX FUEL KIT
BORLA EXHAUST
STOPTECH FRONT AND REAR PADS
DENSO 5346
SEIBON CARBON FIBER OEM HOOD
NICHE 20" WHEELS MATTE BRONZE
LLUMAR STRATOS CERAMIC WINDOW TINT
STEK DYNOSHIELD FULL FRONT CLEAR BRA
CERAMIC PRO SILVER PACKAGE
OEM PUDDLE LIGHTS INSTALLED AFTERMARKET
OEM FRONT AND REAR SPLASH GUARDS
DRONE MOBILE REMOTE START
Reply With Quote
(#4416)
Old
RUFFSTUFF RUFFSTUFF is offline
Junior Member
 
Posts: 94
Join Date: Mar 2019
Car: 2019 STINGER GT2
Default 06-22-2021, 02:37 PM

Quote:
Originally Posted by Terry @ BMS
Hey guys, I'm back home (had a fun hospital stay after unexpected internal bleeding during a routine procedure) but have limited energy so won't be doing a ton of forum or email. Will keep up where I can. Steve is manning the forums you can always email support@burgertuning.com or payam@burgertuning.com if you need a quicker response. I'm able to do around 100 emails a day (1/3 my normal load) so will keep up where I can.
Get better soon!
Reply With Quote
(#4417)
Old
rbjohnson78 rbjohnson78 is offline
New Member
 
Posts: 13
Join Date: Dec 2020
Car: Kia Stinger 3.3
Default 06-22-2021, 06:27 PM

Quote:
Originally Posted by Jaybone
Who said that?
The reply you get from the map6bot email.
Reply With Quote
(#4418)
Old
Jaybone Jaybone is offline
Junior Member
 
Posts: 219
Join Date: Apr 2021
Car: 2020 Kia Stinger GT1 AWD
Default 06-22-2021, 06:51 PM

Quote:
Originally Posted by rbjohnson78
The reply you get from the map6bot email.

Sorry not sure what that is. From what I saw your log looked fine to me


2020 Stinger GT1 AWD CERAMIC SILVER W/RED INTERIOR
JB4 W/FUEL WIRES & EWG WIRES
BMS INTAKES
BMS WMI KIT
BMS OCC
FUEL IT FLEX FUEL KIT
BORLA EXHAUST
STOPTECH FRONT AND REAR PADS
DENSO 5346
SEIBON CARBON FIBER OEM HOOD
NICHE 20" WHEELS MATTE BRONZE
LLUMAR STRATOS CERAMIC WINDOW TINT
STEK DYNOSHIELD FULL FRONT CLEAR BRA
CERAMIC PRO SILVER PACKAGE
OEM PUDDLE LIGHTS INSTALLED AFTERMARKET
OEM FRONT AND REAR SPLASH GUARDS
DRONE MOBILE REMOTE START
Reply With Quote
(#4419)
Old
AWDGT2's Avatar
AWDGT2 AWDGT2 is offline
Junior Member
 
Posts: 430
Join Date: Aug 2020
Car: 2019 AWDGT2
Default 06-22-2021, 07:04 PM

It was probably right when you lifted. One boost is pre throttle, the other is post throttle, quite normal. Now the only way to tell is to post a log. There's no one on earth that can say if you have a problem from what you posted.
It's like asking a doctor to confirm a broken bone over the phone.


Quote:
Originally Posted by rbjohnson78
I sent in my map 2 log and got the message below back. Any concerns with this, or something I should check?

Boost1 and Boost2 To far apart B1: 11.5 B2 3.1 8.4 TS: 2302.75

Darrin S.
2019 AWD GT2, JB4, Meth, MBRP, Agency intakes, Agency FMIC, HKS Plugs 11.13 @ 123 mph
Reply With Quote
(#4420)
Old
stinger38 stinger38 is offline
New Member
 
Posts: 3
Join Date: Jun 2021
Car: Kia Stinger
Default 06-22-2021, 09:31 PM

Quote:
Originally Posted by Jaybone
You have horrible timing. The worst I have ever seen! What are your plugs gapped at?
Gapped down to .022
Reply With Quote
(#4421)
Old
rbjohnson78 rbjohnson78 is offline
New Member
 
Posts: 13
Join Date: Dec 2020
Car: Kia Stinger 3.3
Default 06-23-2021, 04:55 AM

Quote:
Originally Posted by AWDGT2
It was probably right when you lifted. One boost is pre throttle, the other is post throttle, quite normal. Now the only way to tell is to post a log. There's no one on earth that can say if you have a problem from what you posted.
It's like asking a doctor to confirm a broken bone over the phone.
You are probably right, still learning these logs. I enabled future use A, so I think a couple things may look different, I just heard it was easier to diagnose. Log attached for your leisure.
Attached Files
File Type: csv P21-M2-R2-210622-1210.csv (215.4 KB, 43 views)
Reply With Quote
(#4422)
Old
AWDGT2's Avatar
AWDGT2 AWDGT2 is offline
Junior Member
 
Posts: 430
Join Date: Aug 2020
Car: 2019 AWDGT2
Default 06-23-2021, 05:41 AM

Your log looks normal for map2, no issues. I prefer FUA 0, it's actually easier to see deviations than 5 spaghetti line in different colors spread all over the graph.
Reply With Quote
(#4423)
Old
Jaybone Jaybone is offline
Junior Member
 
Posts: 219
Join Date: Apr 2021
Car: 2020 Kia Stinger GT1 AWD
Default 06-23-2021, 07:16 AM

Quote:
Originally Posted by stinger38
Gapped down to .022


I would drop to map 0 and try some different fuel and splash some E85 (3 gallons) to a full tank of fuel and then re log. Map1 is mild and should be fine for 91 octane but that must be some really bad gas.


2020 Stinger GT1 AWD CERAMIC SILVER W/RED INTERIOR
JB4 W/FUEL WIRES & EWG WIRES
BMS INTAKES
BMS WMI KIT
BMS OCC
FUEL IT FLEX FUEL KIT
BORLA EXHAUST
STOPTECH FRONT AND REAR PADS
DENSO 5346
SEIBON CARBON FIBER OEM HOOD
NICHE 20" WHEELS MATTE BRONZE
LLUMAR STRATOS CERAMIC WINDOW TINT
STEK DYNOSHIELD FULL FRONT CLEAR BRA
CERAMIC PRO SILVER PACKAGE
OEM PUDDLE LIGHTS INSTALLED AFTERMARKET
OEM FRONT AND REAR SPLASH GUARDS
DRONE MOBILE REMOTE START
Reply With Quote
(#4424)
Old
rbjohnson78 rbjohnson78 is offline
New Member
 
Posts: 13
Join Date: Dec 2020
Car: Kia Stinger 3.3
Default 06-23-2021, 07:32 AM

Quote:
Originally Posted by AWDGT2
Your log looks normal for map2, no issues. I prefer FUA 0, it's actually easier to see deviations than 5 spaghetti line in different colors spread all over the graph.
Cool! Time to move up to map 3! Running E27 so hopefully all is good! Never ran map 3.
Reply With Quote
(#4425)
Old
Jaybone Jaybone is offline
Junior Member
 
Posts: 219
Join Date: Apr 2021
Car: 2020 Kia Stinger GT1 AWD
Default 06-23-2021, 07:38 AM

Quote:
Originally Posted by rbjohnson78
Cool! Time to move up to map 3! Running E27 so hopefully all is good! Never ran map 3.

Map 3 is good fun!


2020 Stinger GT1 AWD CERAMIC SILVER W/RED INTERIOR
JB4 W/FUEL WIRES & EWG WIRES
BMS INTAKES
BMS WMI KIT
BMS OCC
FUEL IT FLEX FUEL KIT
BORLA EXHAUST
STOPTECH FRONT AND REAR PADS
DENSO 5346
SEIBON CARBON FIBER OEM HOOD
NICHE 20" WHEELS MATTE BRONZE
LLUMAR STRATOS CERAMIC WINDOW TINT
STEK DYNOSHIELD FULL FRONT CLEAR BRA
CERAMIC PRO SILVER PACKAGE
OEM PUDDLE LIGHTS INSTALLED AFTERMARKET
OEM FRONT AND REAR SPLASH GUARDS
DRONE MOBILE REMOTE START
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2020, N54tech.com