N54Tech.com - International Turbo Racing Discussion
(#1)
Old
Jason @ BMS's Avatar
Jason @ BMS Jason @ BMS is offline
administartor
 
Posts: 327
Join Date: Oct 2008
Car: M340i,X5,Raptor,C7 ZR1
Default New 2 gallon low profile meth tank - 04-28-2017, 08:01 PM

Pleased to announce the release of our new integrated universal water/meth tank. It's a once piece design with a mounting point for the pump and an integrated pump feed/baffle to ensure consistent performance. The low profile design makes it easy to fill and we have them in clear white for easy visual level checks or black for stealthier installations.

Tank dimensions: L 15.5" x W 8" x H 8.25"

More details here http://www.burgertuning.com/meth.html

Attached Images
  


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#2)
Old
Lowon's Avatar
Lowon Lowon is offline
Demigod
 
Posts: 1,836
Join Date: Mar 2016
Car: Bmw M2
Default 04-28-2017, 08:42 PM

Nice!
Edit- is the tank baffled or sumped?


2017 BMW M2 - Alpine White, 6MT, Fully Loaded
Mods: Stock for now

Last edited by Lowon; 04-28-2017 at 09:05 PM..
Reply With Quote
(#3)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 30,042
Join Date: Jan 2008
Default 04-28-2017, 09:08 PM

We've integrated a baffle in to the mold to allow operation at lower fluid levels.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#4)
Old
PHAILUR PHAILUR is offline
Junior Member
 
Posts: 35
Join Date: Mar 2017
Car: 335i n54
Default 04-28-2017, 10:41 PM

How safe is running meth. Any risk if you run out and your at WOT?


'09 e92 jet black 6sMT
VRSF ** • VRSF Charge pipe• VRSF 7.5" intercooler• VRSF2" inlets• VRSF DCI•aFe intake scoops•HKS BOV•RB pcv valve•BMS Jb4 g5 w/ Bluetooth •BMS Oil catch can•BMS Clutch valve•NGK plugs•Bosch coils• 450lph Walbro for e85•Master Clutch lightened flywheel-ACT 6 puck clutch•turbo back straight pipe w/ all deleted
Reply With Quote
(#5)
Old
ShocknAwe ShocknAwe is offline
Senior Member
 
Posts: 767
Join Date: Sep 2012
Car: 135i
Default 04-29-2017, 06:18 AM

This is cool! I'd love one designed to fit in the under trunk compartment of the 1er.


2010 135i M-Sport 6MT Jet Black
N54 | Build Thread
Reply With Quote
(#6)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 30,042
Join Date: Jan 2008
Default 04-29-2017, 08:20 AM

Quote:
Originally Posted by PHAILUR
How safe is running meth. Any risk if you run out and your at WOT?
With a JB4 controlling water/meth it's quite safe. We hold boost low until meth is flowing and drop boost if meth flow starts to drop, in addition to numerous other safety systems.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#7)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 30,042
Join Date: Jan 2008
Default 04-29-2017, 08:22 AM

Quote:
Originally Posted by ShocknAwe
This is cool! I'd love one designed to fit in the under trunk compartment of the 1er.
It costs around $30,000 to design the tanks, get the mold made, various 3D printed test articles, longer term testing, etc. So we can only do those for projected higher volume applications. The E82 doesn't make the cut for that, sorry. This tank does fit nicely in the E82 trunk space though pushed up against the rear seat.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#8)
Old
NorCalN55 NorCalN55 is offline
Junior Member
 
Posts: 249
Join Date: Sep 2014
Car: '11 335xi M Sport
Default 04-29-2017, 08:29 AM

I'm guessing the new billet vent caps will fit on this tank?!
Reply With Quote
(#9)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 30,042
Join Date: Jan 2008
Default 04-29-2017, 08:39 AM

Absolutely!


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#10)
Old
Jason @ BMS's Avatar
Jason @ BMS Jason @ BMS is offline
administartor
 
Posts: 327
Join Date: Oct 2008
Car: M340i,X5,Raptor,C7 ZR1
Default 04-29-2017, 02:31 PM

Here it is with the billet cap.
Attached Images
 


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#11)
Old
Jason @ BMS's Avatar
Jason @ BMS Jason @ BMS is offline
administartor
 
Posts: 327
Join Date: Oct 2008
Car: M340i,X5,Raptor,C7 ZR1
Default 04-29-2017, 04:06 PM

Lots of room around and above this tank. Perfect for many applications. 15.5" x 8" footprint.
Attached Images
 


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#12)
Old
Tin Tin is offline
New Member
 
Posts: 22
Join Date: May 2014
Car: 135i
Default 04-30-2017, 02:06 PM

That's a nice new tank, got the old 2.3gal version mounted in the same spot.


Quote:
Originally Posted by ShocknAwe
This is cool! I'd love one designed to fit in the under trunk compartment of the 1er.
Custom tank made by some folks in Australia for 1Ms..
Reply With Quote
(#13)
Old
protecon's Avatar
protecon protecon is offline
Junior Member
 
Posts: 53
Join Date: Sep 2016
Car: 2010 X5M MCB
Default 04-30-2017, 04:31 PM

Quote:
Originally Posted by Tin
That's a nice new tank, got the old 2.3gal version mounted in the same spot.

Custom tank made by some folks in Australia for 1Ms..
You shouldn't make methanol tanks out of aluminium.
Just because the tanks doesn't leak immediately, doesn't mean it isn't causing an issue. Stainless steel or vulcanised poly are the only safe options.

From a fabrication and welding company that specialises in aluminium;

Quote:
My experience is that Methanol will corrode aluminium unless you can maintain a clean surface after using, which in a tank I cannot see it being possible.
Reply With Quote
(#14)
Old
Lowon's Avatar
Lowon Lowon is offline
Demigod
 
Posts: 1,836
Join Date: Mar 2016
Car: Bmw M2
Default 04-30-2017, 05:13 PM

Quote:
Originally Posted by protecon
You shouldn't make methanol tanks out of aluminium.
Just because the tanks doesn't leak immediately, doesn't mean it isn't causing an issue. Stainless steel or vulcanised poly are the only safe options.

From a fabrication and welding company that specialises in aluminium;
+1


2017 BMW M2 - Alpine White, 6MT, Fully Loaded
Mods: Stock for now
Reply With Quote
(#15)
Old
ShocknAwe ShocknAwe is offline
Senior Member
 
Posts: 767
Join Date: Sep 2012
Car: 135i
Default 04-30-2017, 05:20 PM

Quote:
Originally Posted by Terry @ BMS
It costs around $30,000 to design the tanks, get the mold made, various 3D printed test articles, longer term testing, etc. So we can only do those for projected higher volume applications. The E82 doesn't make the cut for that, sorry. This tank does fit nicely in the E82 trunk space though pushed up against the rear seat.
Whew. Yeah, ok I get that. Too bad! Thanks for the reply Terry.


2010 135i M-Sport 6MT Jet Black
N54 | Build Thread
Reply With Quote
(#16)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 5,434
Join Date: Oct 2013
Car: e90 335i
Default 04-30-2017, 05:38 PM

Quote:
Originally Posted by protecon
You shouldn't make methanol tanks out of aluminium.
Just because the tanks doesn't leak immediately, doesn't mean it isn't causing an issue. Stainless steel or vulcanised poly are the only safe options.

From a fabrication and welding company that specialises in aluminium;
You will need to anodize aluminum tanks, they are common in the industry when done correctly.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#17)
Old
Peter @ Pure's Avatar
Peter @ Pure Peter @ Pure is offline
Demigod
 
Posts: 1,687
Join Date: Aug 2013
Car: F20 M135i
Default 05-01-2017, 01:17 PM

Looking good. Will these replace the 2.3g tanks? Or both remain?


F21 M140i - 100-200: 6.95
Audi TTRS - 100-200: 4.47 60-130: 5.16
F80 M3 - 100-200: 4.45, 60-130: 5.1
F20 M135i (sold) - 100-200: 6.26 , 60-130: 7.4
peter@pureturbos.eu
peter@pureturbos.com
peter@protuningfreaks.com
pureturbos.eu
Reply With Quote
(#18)
Old
N54QC N54QC is offline
Senior Member
 
Posts: 774
Join Date: Jan 2016
Car: 07 BMW 335i
Default 05-01-2017, 02:42 PM

Quote:
Originally Posted by Peter @ Pure
Looking good. Will these replace the 2.3g tanks? Or both remain?
I would hope not. I got the 2.3 and it tucks away nicely on the side of my trunk on my E90. If they were discontinuing those, I don't think I could part with mine knowing I would have to look for a used one should I ever sell my meth kit. IMO, 2.3 is the way to go with a E90 unless Terry comes up with something that can be put in underneath the trunk mat.


VTT Stage 2+ | JB4 G5 w/ Trebila BEF | Fuel-It Stage 3 | XHP Stage 3 | BL Coils | VTT Inlets | MMP Outlets | BMS Meth Dual 10/5CM | VRSF 7" FMIC | VRSF **'s | BMS CP | BMS DCI | Turbosmart Dual Port | 3.5 TMAP | BMS OCC | VTT PVC | BMS Anti-Lag | NGK 5992 | M3 Rear Upper Controls And Godspeed TB's | Lock-Down Brace | 235/285-18 PSS
Reply With Quote
(#19)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 30,042
Join Date: Jan 2008
Default 05-01-2017, 02:47 PM

Quote:
Originally Posted by Peter @ Pure
Looking good. Will these replace the 2.3g tanks? Or both remain?
We haven't decided if we're going to keep the 2.3g 2piece tank around yet.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright © 2007 - 2019, N54tech.com