N54Tech.com - International Turbo Racing Discussion
(#1)
Old
MFactory MFactory is offline
Senior Member
 
Posts: 632
Join Date: Mar 2014
Car: BMW E92 M3
Exclamation MFactory Solid Diff Bushings - 04-28-2015, 06:56 AM

Hey guys,

we've just finished our new batch of Solid Diff Bushings:



- Made from Thermoplastic Vulcanizate, not cheap polyurethane
- Offers the hardness of plastic for a more solid mount
- Offers the elasticity of rubber for unsurpassed durability
- Self-Lubricating and resistant to oil and the elements
- Will not crack or deform like polyurethane or rubber

These replace all 3 of the Differential Carrier Bushings (2 x Front, 1 x Rear), effectively locking the Differential Carrier in place and removing any sloppiness associated with worn bushings.

The result is a much more stable rear-end, increasing traction and reducing wheel-hop.

Please Note: Due to the Differential Carrier having a more solid mount to the subframe, there may be a slight increase in NVH

MSRP: $149.95 + Shipping
Forum Special: FREE Worldwide Shipping

Please let me know if you have any questions


MFactory / YCW Engineering (LSD's, Gears, Flywheels, Clutches, Driveshafts, Axles) - www.teammfactory.com
YCW Suspension (Mid-Range Coilovers) - www.ycwsuspension.com
SWIFT Springs Europe (Exclusive Distributor) - www.swiftspringseurope.com
SWIFT Springs Asia (Exclusive Distributor) - www.swiftspringsasia.com

Last edited by MFactory; 05-29-2015 at 09:40 AM..
Reply With Quote
(#2)
Old
Levan-i's Avatar
Levan-i Levan-i is offline
Senior Member
 
Posts: 642
Join Date: Sep 2014
Car: 2007 BMW 335i E92
Default 04-28-2015, 09:58 AM

this is WOW!

i bought them from ecs and havenot installed yet, if i knew you were making it i would wait

any plans for subframe bushings? maybe i would wait?


2007 E92 335
ST - GTW3684
JB4 G5, ST Pump Flash, Fuel-It Stage 1, Meth
MT (after swap),
MFactory LSD
Reply With Quote
(#3)
Old
MFactory MFactory is offline
Senior Member
 
Posts: 632
Join Date: Mar 2014
Car: BMW E92 M3
Default 04-28-2015, 10:00 AM

We have thought about it, but want to wait to see how well these Diff Bushings go down first


MFactory / YCW Engineering (LSD's, Gears, Flywheels, Clutches, Driveshafts, Axles) - www.teammfactory.com
YCW Suspension (Mid-Range Coilovers) - www.ycwsuspension.com
SWIFT Springs Europe (Exclusive Distributor) - www.swiftspringseurope.com
SWIFT Springs Asia (Exclusive Distributor) - www.swiftspringsasia.com
Reply With Quote
(#4)
Old
Levan-i's Avatar
Levan-i Levan-i is offline
Senior Member
 
Posts: 642
Join Date: Sep 2014
Car: 2007 BMW 335i E92
Default 04-28-2015, 11:13 AM

ok


2007 E92 335
ST - GTW3684
JB4 G5, ST Pump Flash, Fuel-It Stage 1, Meth
MT (after swap),
MFactory LSD
Reply With Quote
(#5)
Old
MFactory MFactory is offline
Senior Member
 
Posts: 632
Join Date: Mar 2014
Car: BMW E92 M3
Default 04-28-2015, 09:43 PM

Quote:
Originally Posted by Levan-i
ok
Under development now


MFactory / YCW Engineering (LSD's, Gears, Flywheels, Clutches, Driveshafts, Axles) - www.teammfactory.com
YCW Suspension (Mid-Range Coilovers) - www.ycwsuspension.com
SWIFT Springs Europe (Exclusive Distributor) - www.swiftspringseurope.com
SWIFT Springs Asia (Exclusive Distributor) - www.swiftspringsasia.com
Reply With Quote
(#6)
Old
Levan-i's Avatar
Levan-i Levan-i is offline
Senior Member
 
Posts: 642
Join Date: Sep 2014
Car: 2007 BMW 335i E92
Default 04-29-2015, 01:22 AM

Yoyyy perfect!

ill wait for it and then install all together!

thanks Stephen!


2007 E92 335
ST - GTW3684
JB4 G5, ST Pump Flash, Fuel-It Stage 1, Meth
MT (after swap),
MFactory LSD
Reply With Quote
(#7)
Old
cmark8 cmark8 is offline
New Member
 
Posts: 1
Join Date: Feb 2015
Car: BMW 135i N54 6MT
Default 04-30-2015, 12:02 PM

Put me down for the diff bushings!
Reply With Quote
(#8)
Old
MFactory MFactory is offline
Senior Member
 
Posts: 632
Join Date: Mar 2014
Car: BMW E92 M3
Default 05-05-2015, 10:09 PM

Please send me a PM to order


MFactory / YCW Engineering (LSD's, Gears, Flywheels, Clutches, Driveshafts, Axles) - www.teammfactory.com
YCW Suspension (Mid-Range Coilovers) - www.ycwsuspension.com
SWIFT Springs Europe (Exclusive Distributor) - www.swiftspringseurope.com
SWIFT Springs Asia (Exclusive Distributor) - www.swiftspringsasia.com
Reply With Quote
(#9)
Old
MFactory MFactory is offline
Senior Member
 
Posts: 632
Join Date: Mar 2014
Car: BMW E92 M3
Default 05-08-2015, 11:24 AM

Still a couple more left at the special introductory pricing


MFactory / YCW Engineering (LSD's, Gears, Flywheels, Clutches, Driveshafts, Axles) - www.teammfactory.com
YCW Suspension (Mid-Range Coilovers) - www.ycwsuspension.com
SWIFT Springs Europe (Exclusive Distributor) - www.swiftspringseurope.com
SWIFT Springs Asia (Exclusive Distributor) - www.swiftspringsasia.com
Reply With Quote
(#10)
Old
Whosdady Whosdady is offline
Junior Member
 
Posts: 196
Join Date: Aug 2012
Car: 2007 335i Coupe
Default 05-22-2015, 06:57 PM

I'm interested but concerned about NVH. I currently have power flex purple... Which has no increased NVH over stock. Has anyone installed these and offered a review?
Reply With Quote
(#11)
Old
MFactory MFactory is offline
Senior Member
 
Posts: 632
Join Date: Mar 2014
Car: BMW E92 M3
Default 05-23-2015, 03:57 PM

If you're not noticing any NVH with your current poly bushes, you won't notice any with these.


MFactory / YCW Engineering (LSD's, Gears, Flywheels, Clutches, Driveshafts, Axles) - www.teammfactory.com
YCW Suspension (Mid-Range Coilovers) - www.ycwsuspension.com
SWIFT Springs Europe (Exclusive Distributor) - www.swiftspringseurope.com
SWIFT Springs Asia (Exclusive Distributor) - www.swiftspringsasia.com
Reply With Quote
(#12)
Old
Whosdady Whosdady is offline
Junior Member
 
Posts: 196
Join Date: Aug 2012
Car: 2007 335i Coupe
Default 05-24-2015, 08:03 AM

How tough is the install? Do they require a press or can they just be tapped in?

Are they as hard (material hardness) as the other options like solid aluminum/delrin offered by other companies? I was just about to install delrin but saw yours as another option...
Reply With Quote
(#13)
Old
MFactory MFactory is offline
Senior Member
 
Posts: 632
Join Date: Mar 2014
Car: BMW E92 M3
Default 05-24-2015, 08:09 AM

They can be installed just like any other bushings, so not too difficult, no.

When we say "solid" bushings, we mean that they are solid in the literal sense, not in terms of hardness (i.e oem bushings are hollow).

When most refer to Aluminium/Delrin bushings as solid, they refer to their hardness (i.e solid instead of soft).

As our bushes are TPV (50/50 plastic/rubber), they still exhibit the same hardness/compression properties as hard rubber bushings, so are not as "hard" as Aluminium/Delrin.


MFactory / YCW Engineering (LSD's, Gears, Flywheels, Clutches, Driveshafts, Axles) - www.teammfactory.com
YCW Suspension (Mid-Range Coilovers) - www.ycwsuspension.com
SWIFT Springs Europe (Exclusive Distributor) - www.swiftspringseurope.com
SWIFT Springs Asia (Exclusive Distributor) - www.swiftspringsasia.com
Reply With Quote
(#14)
Old
Whosdady Whosdady is offline
Junior Member
 
Posts: 196
Join Date: Aug 2012
Car: 2007 335i Coupe
Default 05-24-2015, 08:48 AM

Quote:
Originally Posted by MFactory
They can be installed just like any other bushings, so not too difficult, no.

When we say "solid" bushings, we mean that they are solid in the literal sense, not in terms of hardness (i.e oem bushings are hollow).

When most refer to Aluminium/Delrin bushings as solid, they refer to their hardness (i.e solid instead of soft).

As our bushes are TPV (50/50 plastic/rubber), they still exhibit the same hardness/compression properties as hard rubber bushings, so are not as "hard" as Aluminium/Delrin.
Thank you for the clarification. I'm looking for a harder bushing...
Reply With Quote
(#15)
Old
gsxtasee gsxtasee is offline
Junior Member
 
Posts: 36
Join Date: Dec 2013
Car: 2010 E61 535 awd
Default 06-14-2015, 07:27 AM

What do you got for my E61? Still N54 powered and modified and very in need of your support in this area.. Didn't see anything at all listed on your website for 535s...
Reply With Quote
(#16)
Old
MFactory MFactory is offline
Senior Member
 
Posts: 632
Join Date: Mar 2014
Car: BMW E92 M3
Default 06-14-2015, 08:54 AM

I've never checked yet on the E60. Will need to do some research for you.


MFactory / YCW Engineering (LSD's, Gears, Flywheels, Clutches, Driveshafts, Axles) - www.teammfactory.com
YCW Suspension (Mid-Range Coilovers) - www.ycwsuspension.com
SWIFT Springs Europe (Exclusive Distributor) - www.swiftspringseurope.com
SWIFT Springs Asia (Exclusive Distributor) - www.swiftspringsasia.com
Reply With Quote
(#17)
Old
Levan-i's Avatar
Levan-i Levan-i is offline
Senior Member
 
Posts: 642
Join Date: Sep 2014
Car: 2007 BMW 335i E92
Default 06-21-2015, 05:07 AM

Any news about subframe bushings?


2007 E92 335
ST - GTW3684
JB4 G5, ST Pump Flash, Fuel-It Stage 1, Meth
MT (after swap),
MFactory LSD
Reply With Quote
(#18)
Old
MFactory MFactory is offline
Senior Member
 
Posts: 632
Join Date: Mar 2014
Car: BMW E92 M3
Default 06-26-2015, 04:20 AM

Putting the measurements into the system just now, and will see if they are cost-effective enough for us to produce


MFactory / YCW Engineering (LSD's, Gears, Flywheels, Clutches, Driveshafts, Axles) - www.teammfactory.com
YCW Suspension (Mid-Range Coilovers) - www.ycwsuspension.com
SWIFT Springs Europe (Exclusive Distributor) - www.swiftspringseurope.com
SWIFT Springs Asia (Exclusive Distributor) - www.swiftspringsasia.com
Reply With Quote
(#19)
Old
Levan-i's Avatar
Levan-i Levan-i is offline
Senior Member
 
Posts: 642
Join Date: Sep 2014
Car: 2007 BMW 335i E92
Default 06-26-2015, 11:09 AM

keep us updated about subframe bushings plz,
i'm still not installing diff ones i've got, waiting for subframe bushings to make all together


2007 E92 335
ST - GTW3684
JB4 G5, ST Pump Flash, Fuel-It Stage 1, Meth
MT (after swap),
MFactory LSD
Reply With Quote
(#20)
Old
frmtl2_335i's Avatar
frmtl2_335i frmtl2_335i is offline
Junior Member
 
Posts: 305
Join Date: Mar 2013
Car: 07 e92 M/T
Default 06-26-2015, 01:48 PM

Are these still available?


FFTEC 6466 Gen2, MHD Flash Tuned by Wedge, BMS PI Kit, FUEL-IT Stg 3 pump, HALTECH PS-1000, MFactory LSD w/lock down brace, ECS Trailing Arms, M3 control arms, M3 brace, DGR Coilovers, N20 tmap sensor, BMS OCC, VRSF exhaust w/4" tips, VRSF CP, Tial BOV. BigTom FMIC, Msport front & rear, m3 sides skirts.
12.23 @ 118.9mph (RBs)
2.3 60' lol (single pass night, bog shifting)
Reply With Quote
(#21)
Old
MFactory MFactory is offline
Senior Member
 
Posts: 632
Join Date: Mar 2014
Car: BMW E92 M3
Default 06-26-2015, 09:52 PM

Yes, price is $149.95 inc free shipping


MFactory / YCW Engineering (LSD's, Gears, Flywheels, Clutches, Driveshafts, Axles) - www.teammfactory.com
YCW Suspension (Mid-Range Coilovers) - www.ycwsuspension.com
SWIFT Springs Europe (Exclusive Distributor) - www.swiftspringseurope.com
SWIFT Springs Asia (Exclusive Distributor) - www.swiftspringsasia.com
Reply With Quote
(#22)
Old
Levan-i's Avatar
Levan-i Levan-i is offline
Senior Member
 
Posts: 642
Join Date: Sep 2014
Car: 2007 BMW 335i E92
Default 07-05-2015, 09:49 AM

Quote:
Originally Posted by MFactory
Putting the measurements into the system just now, and will see if they are cost-effective enough for us to produce
any news?


2007 E92 335
ST - GTW3684
JB4 G5, ST Pump Flash, Fuel-It Stage 1, Meth
MT (after swap),
MFactory LSD
Reply With Quote
(#23)
Old
Levan-i's Avatar
Levan-i Levan-i is offline
Senior Member
 
Posts: 642
Join Date: Sep 2014
Car: 2007 BMW 335i E92
Default 07-14-2015, 08:35 AM

bump


2007 E92 335
ST - GTW3684
JB4 G5, ST Pump Flash, Fuel-It Stage 1, Meth
MT (after swap),
MFactory LSD
Reply With Quote
(#24)
Old
Levan-i's Avatar
Levan-i Levan-i is offline
Senior Member
 
Posts: 642
Join Date: Sep 2014
Car: 2007 BMW 335i E92
Default 09-04-2015, 05:20 PM

subframe bushings
subframe bushings
subframe bushings
)


2007 E92 335
ST - GTW3684
JB4 G5, ST Pump Flash, Fuel-It Stage 1, Meth
MT (after swap),
MFactory LSD
Reply With Quote
(#25)
Old
MFactory MFactory is offline
Senior Member
 
Posts: 632
Join Date: Mar 2014
Car: BMW E92 M3
Default 01-09-2016, 10:03 AM

All PM's replied


MFactory / YCW Engineering (LSD's, Gears, Flywheels, Clutches, Driveshafts, Axles) - www.teammfactory.com
YCW Suspension (Mid-Range Coilovers) - www.ycwsuspension.com
SWIFT Springs Europe (Exclusive Distributor) - www.swiftspringseurope.com
SWIFT Springs Asia (Exclusive Distributor) - www.swiftspringsasia.com
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2019, N54tech.com