Phoenix Racing Aluminum Intake Manifold w/ Port Injection - Page 2 - N54Tech.com

KPDcompany · 05-16-2018, 01:28 PM

Quote:

Originally Posted by Terry @ BMS

It's 599 for just manifold. You can try to cap injectors but not sure if or how that could be done. Has 1/4 fitting for bov.

If you were interested, we could come up with some block off plugs, use o-rings on both sides, but you would have to have the fuel rail installed to do this. These could easily be printed for cheap.

ShocknAwe · 05-16-2018, 01:44 PM

Quote:

Originally Posted by Terry @ BMS

It's 599 for just manifold. You can try to cap injectors but not sure if or how that could be done. Has 1/4 fitting for bov.

Ah. So what's the weight of manifold + rail? Stock is ~6-8lbs if I recall correctly.

Payam @ BMS · 05-16-2018, 02:59 PM

Quote:

Originally Posted by ShocknAwe

Ah. So what's the weight of manifold + rail? Stock is ~6-8lbs if I recall correctly.

Looks to be almost 11lbs.

ShocknAwe · 05-16-2018, 07:08 PM

Quote:

Originally Posted by Payam @ BMS

Looks to be almost 11lbs.

Not bad for metal!

Terry @ BMS · 05-16-2018, 09:13 PM

About the same weight as stock intake + a PI spacer.

07335i · 06:17 AM

Quote:

Originally Posted by Steve @ BMS/Fuel-It!

We'll have these up on our website tomorrow with a plethora of options.

question, if I already have the Fuel-It Pi kit with retunrn line and fuel line upgrade with an ethanol sensor installed, will I need any additional option or anything? basic kit??

one more question is... Can I use your orginal PI kit with this metal manfold for direct port meth injection???

Trickcruiser · 05-17-2018, 03:51 AM

We have one on the way and will be doing a step x step very soon!

psixtc · 05-17-2018, 07:46 AM

Quote:

Originally Posted by Trickcruiser

We have one on the way and will be doing a step x step very soon!

I wish it were being installed on the Evil1 instead of whatever you're putting it on

Steve @ BMS/Fuel-It! · 05-17-2018, 09:04 AM

Quote:

Originally Posted by 07335i

question, if I already have the Fuel-It Pi kit with retunrn line and fuel line upgrade with an ethanol sensor installed, will I need any additional option or anything? basic kit??

one more question is... Can I use your orginal PI kit with this metal manfold for direct port meth injection???

You could, you'll just need to get the DPMI version of the kit on our website with the meth line.

http://www.fuel-it.com/phoenix-racin...ort-injection/

Or if you've already purchased the manifold additional upgrade options for meth lines, fuel lines, ethanol sensors, ect. these manifolds can also be found here...

http://www.fuel-it.com/phoenix-racin...grade-options/

Trickcruiser · 05-17-2018, 11:42 AM

Quote:

Originally Posted by psixtc

I wish it were being installed on the Evil1 instead of whatever you're putting it on

Just drive her back so I can throw one on! It’s been what, a month since I made that thing throw ALL the codes? LOL

Terry @ BMS · 05-17-2018, 04:23 PM

Have several orders in. Hope to get them out tomorrow or Monday. Waiting for the FuelIT injector kits Steve sent us to show up.

chadillac2000 · 05-18-2018, 08:03 AM

Has anyone tried running the OEM engine cover with this manifold to confirm whether or not it fits? I'm not opposed to trimming, as I've already had to hack mine up a bit to accommodate the top mount.

treehouse · 05-18-2018, 10:57 AM

Does this manifold add more space around the OFHG? Can you remove the OFHG without removing the manifold?

BOosted 335i · 05-18-2018, 12:04 PM

Can we get some pics of the connections underneath of manifold and inside throttle body?

Payam @ BMS · 05-18-2018, 12:22 PM

Quote:

Originally Posted by treehouse

Does this manifold add more space around the OFHG? Can you remove the OFHG without removing the manifold?

You will still need to move it to reach the bolt.

Quote:

Originally Posted by BOosted 335i

Can we get some pics of the connections underneath of manifold and inside throttle body?

The phone flash and the darkness coudln't line up, every time I took a pic of the inside it was blurry. I got this photo though, so I hope that helps a bit.

BOosted 335i · 05-18-2018, 01:51 PM

Quote:

Originally Posted by Payam @ BMS

You will still need to move it to reach the bolt.

The phone flash and the darkness coudln't line up, every time I took a pic of the inside it was blurry. I got this photo though, so I hope that helps a bit.

Yeah great thanks.i was wondering what it looked like from those welds on the tubes if it's smooth inside.

teggei2 · 05-19-2018, 10:13 PM

I just placed an order with Platinum Package, 750cc injectors, and JB4 PI controller. =)

Terry @ BMS · 05-20-2018, 05:07 PM

Quote:

Originally Posted by teggei2

I just placed an order with Platinum Package, 750cc injectors, and JB4 PI controller. =)

PrzeChuj · 05-23-2018, 06:58 PM

Steve your price on your site is $699 for the manifold , your post says starting at $599 ???

SPANKY · 05-24-2018, 03:23 AM

What's the difference with this and sharp customs.they are selling same intake it seems at 100.00 less.

Steve @ BMS/Fuel-It! · 05-24-2018, 08:12 AM

Quote:

Originally Posted by PrzeChuj

Steve your price on your site is $699 for the manifold , your post says starting at $599 ???

Enter the code PHOENIX at checkout for $100 discount.

Terry @ BMS · 05-24-2018, 08:27 AM

Quote:

Originally Posted by SPANKY

What's the difference with this and sharp customs.they are selling same intake it seems at 100.00 less.

Similar intakes are made in China. We ensured our supplier made some changes to improve fitment, and we also provide a USA hardware package with better orings (the ones they come with don't seal right). We're not highlighting all the fine details because then the next China company will just copy what we fixed.

SPANKY · 05-24-2018, 05:51 PM

Quote:

Originally Posted by Terry @ BMS

Similar intakes are made in China. We ensured our supplier made some changes to improve fitment, and we also provide a USA hardware package with better orings (the ones they come with don't seal right). We're not highlighting all the fine details because then the next China company will just copy what we fixed.

thanks for the info.

chadillac2000 · 07:26 AM

Mine showed up earlier today. Everything was packaged up nicely:

Out of the plastic wrap. Welds don't look too bad on the exterior, nor does the finish. It's not as pretty as the FF polished units, but its not as expensive either, and it still beats the look of the stock waffle.

Here are some interior shots illuminated by the LED on my iPhone X starting with where the injectors will sit. The white streaks seem to be some type of residue that has dried on the black finish during the manufacturing process -- I'll try to remove this before installation.

Fuel rail looks good too.

USA hardware looks nice, along with o-rings that should hold up to the heat.

If you ordered the fueling kit from Fuel-It! the package will also include what's shown below. I'm a big fan of how Fuel-It! packages all their parts.

Because I already had upgraded Fuel-It! lines from the tank to HPFP with an ethanol sensor, I went with the upgraded camlock style line that replaces the line shown above and will hook up to my ethanol sensor + PI fuel rail + HPFP.

I also added a JB4 PI controller to finish off this setup.

I have a replacement HPFP in hand, should be receiving my stage 3 bucket from Fuel-It! sometime next week, and have hopes to install everything over the next few months as time allows.

Payam @ BMS · 05-29-2018, 08:03 PM

Really awesome pics Chad, thanks again! Can't wait until you strap these on so you can actually turn it up a bit