JB4tech.com - International Turbo Tuning Discussion
Prev Previous Post   Next Post Next
Tognot Tognot is offline
New Member
Posts: 2
Join Date: Sep 2021
Car: E60 535i
Default Low vacuum from boost controllers - 09-12-2021, 09:44 PM

Recently bought a “project” . 09 535i 6spd. 130k miles . I’ll skip all the original problems and fast forward ( after many hours and parts) to where it sits now.

New OEM turbos, all intakes, hoses, oil pan gasket, w pump, radiator, walnut blast and more.

Problem: 4 psi boost. I have measured this a couple of different ways and I’m sure it’s correct. Also, I owned a n54 in the past and have an idea how it should pull.

Diagnosis done: over 25” of vacuum TO boost solenoids at idle. I tee’d into the vacuum lines FROM the solenoids to the turbos and read the vacuum when driving. At first, car pulls hard for about 1/2 second ( and vacuum to turbos/ waste gates is over 20”). Then vacuum drops to maybe 5” and so does the power. It holds about 4psi boost under sustained full throttle.

My thought: computer is killing the duty cycle on the BC solenoids and also the vacuum. I can’t find info with enough detail that describes the circuit and parameters of the BC solenoids and what affects their duty cycle.

Only code is 2AAF. I have searched for a couple days and found no similar problem but maybe ( obviously) missing something here. Thanks in advance for help “
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

vBulletin Skin developed by: vBStyles.com
Copyright © 2007 - 2022, JB4tech.com