N54Tech.com - International Turbo Racing Discussion
MStinger19 MStinger19 is offline
New Member
Posts: 1
Join Date: Sep 2021
Car: 2019 Stinger GT1 AWD
Default Log w/ pulls on map 2, 3 and 5 - check please. - 09-10-2021, 07:51 PM

Turboencabulator from Stingerforum here -

An update it looks like it was a fuel wire that was causing all my issues. (so happy to have finally sorted it) Trims are mirrored now and not deviating. Pulls all the way now.

K&N Intakes
BMS Catch Can
Denso 5346 Plugs Gapped @ 0.022" (fresh set)
JB4 w/ Fuel & EWG wires.

I did a few pulls this evening First big pull on the log is Map 2, 2nd big pull is map 3. 3rd short pull from a dig is map 5.
Car had 7/8 tank of Shell 93 + 2 caps of boostane professional.
I plotted the CSV on DataZap

I pushed the EWG settings back to default recommended from the EWG thread
Duty @ 50 across the board
FF@ 50
Pid Gain @ 20
Shift reduction at 60.

Thanks for taking the time to review the log.
Attached Files
File Type: csv Map's 2 - 3 and 5.csv (430.1 KB, 37 views)

2019 Stinger GT1 AWD - K&N Intakes, JB4 w/ Fuel & EWG wires, BMS Catch Can.
Reply With Quote
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Posts: 33,771
Join Date: Jan 2008
Default 09-12-2021, 09:28 PM

Runs look good to me. Leave FUA = 0 as I've become used to reading these logs that way now.

I don't see any issues with map5 although that is the shortest run there. If it looks like this map3 run during a longer pull then its good to go.
Attached Images

Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2020, N54tech.com