N54Tech.com - International Turbo Racing Discussion
(#1)
Old
NelsonRacingWheel NelsonRacingWheel is offline
Junior Member
 
Posts: 30
Join Date: Feb 2017
Car: BMW
Default Nelson Racing N54 6061 Billet Intake Manifold Flanges! DIY Manifold! - 03-28-2017, 09:26 AM

Here is the Nelson Racing Billet 6061 Aluminum Intake Manifold Flange!


This is an exact fit for all N54B30 engines from 2007-2013 and will allow you to create your own custom Intake Manifold!
We do not offer any supplemental fueling drilling, but with the thickness of 12mm you can easily add in 1/8 Water Methanol Nozzles with room to spare!
In stock at limited QTY's and all include our custom Fluorosilicone Gaskets that are rated for 400 degrees of heat resistance and fuel injection proof!

The cost for each is $75.00 + $15.00 Shipping! So $90.00 shipped to your door!

We had QTY 20 in stock but now are down to our last 4!


https://www.nelsonracingwheel.com/sh...luminum-flange
Attached Images
    


2010 BMW 135i - 526whp and 592tq on a DynoJet

FBO + VTT S1 + Inlets + 100% E85 Port Injection

Owner, www.NelsonRacingWheel.com
Reply With Quote
(#2)
Old
JuniorB JuniorB is offline
Junior Member
 
Posts: 314
Join Date: Mar 2016
Car: 2007 e60 5 series
Default 04-15-2017, 09:02 PM

Do you plan on making any more? I would love to make a direct port nitrous plate , thank you.
Reply With Quote
(#3)
Old
NelsonRacingWheel NelsonRacingWheel is offline
Junior Member
 
Posts: 30
Join Date: Feb 2017
Car: BMW
Default 04-15-2017, 09:04 PM

Yes I have 10 more being made for customers and they will be 16mm thick this time. The 12 worked well for WMI but I wanted a bit more thickness for the next batch.


2010 BMW 135i - 526whp and 592tq on a DynoJet

FBO + VTT S1 + Inlets + 100% E85 Port Injection

Owner, www.NelsonRacingWheel.com
Reply With Quote
(#4)
Old
JuniorB JuniorB is offline
Junior Member
 
Posts: 314
Join Date: Mar 2016
Car: 2007 e60 5 series
Default 04-16-2017, 11:42 AM

Nice, what's the price on this, can you pre drill them for 1/8 fittings? Thank you.
Reply With Quote
(#5)
Old
dirtypickle dirtypickle is offline
Junior Member
 
Posts: 72
Join Date: Jan 2017
Car: 335i
Default 04-16-2017, 12:57 PM

Quote:
Originally Posted by JuniorB
Nice, what's the price on this, can you pre drill them for 1/8 fittings? Thank you.
Yes - me too!
Reply With Quote
(#6)
Old
NelsonRacingWheel NelsonRacingWheel is offline
Junior Member
 
Posts: 30
Join Date: Feb 2017
Car: BMW
Default 04-17-2017, 11:06 AM

Sorry i do not drill the ports!

This is for those who would like to get them drilled or make their own manifold as many have tried to do but failed since the flange i have made is the only turn key option to start with.

Also all my flanges come with special gaskets that withstand the added heat of a metal flange


2010 BMW 135i - 526whp and 592tq on a DynoJet

FBO + VTT S1 + Inlets + 100% E85 Port Injection

Owner, www.NelsonRacingWheel.com
Reply With Quote
(#7)
Old
JuniorB JuniorB is offline
Junior Member
 
Posts: 314
Join Date: Mar 2016
Car: 2007 e60 5 series
Default 04-17-2017, 05:56 PM

Is there an off set price in going thicker, or are they the same price? I definitely want to try one!
Reply With Quote
(#8)
Old
NelsonRacingWheel NelsonRacingWheel is offline
Junior Member
 
Posts: 30
Join Date: Feb 2017
Car: BMW
Default 04-17-2017, 06:03 PM

My price for the 16mm thickness with gaskets runs $85 and that's the only thickness I offer.

It's not a cheap item to make and OEM gaskets run about $30 alone so I sell these very quickly.

I had 50 total in the last month and sold them all in about 3 days.

I have 10 more arriving tomorrow and will post them for sale on my website. I believe 3 are already sold to repeat shops who use them for their manifolds.


2010 BMW 135i - 526whp and 592tq on a DynoJet

FBO + VTT S1 + Inlets + 100% E85 Port Injection

Owner, www.NelsonRacingWheel.com
Reply With Quote
(#9)
Old
JuniorB JuniorB is offline
Junior Member
 
Posts: 314
Join Date: Mar 2016
Car: 2007 e60 5 series
Default 04-17-2017, 06:46 PM

That's fair,,I'll check your site tomorrow night,,thank you.,Chris
Reply With Quote
(#10)
Old
JuniorB JuniorB is offline
Junior Member
 
Posts: 314
Join Date: Mar 2016
Car: 2007 e60 5 series
Default 04-18-2017, 03:13 AM

Sorry for all the questions, has there been any manifold made with this yet, and to you think this could be used in a sandwich application? Is like to find a cheaper alternative for a nos plate,the longer bolts will have to be sourced,thanks again.
Reply With Quote
(#11)
Old
NelsonRacingWheel NelsonRacingWheel is offline
Junior Member
 
Posts: 30
Join Date: Feb 2017
Car: BMW
Default 04-18-2017, 09:38 AM

The flanges are being used by Eric Hodes as the most recent completed manifold with my flanges. He is popular on IG and FB where he tends to have his circles.

The remaining flanges i have yet to get updates on, but doug @ Frankenturbo did make a direct port methanol plate with the prior 12mm flange and it was a little tight to fit the 1/8" nozzles into them, but it did work overall.

That is the main reason why i opted to make the next set 4mm thicker to compensate for the WMI users who drill the proper holes for them


2010 BMW 135i - 526whp and 592tq on a DynoJet

FBO + VTT S1 + Inlets + 100% E85 Port Injection

Owner, www.NelsonRacingWheel.com
Reply With Quote
(#12)
Old
JuniorB JuniorB is offline
Junior Member
 
Posts: 314
Join Date: Mar 2016
Car: 2007 e60 5 series
Default 04-18-2017, 01:22 PM

I definitely was one, ill have to find out about his hardware. Ill keep an eye out. Ty.
Reply With Quote
(#13)
Old
NelsonRacingWheel NelsonRacingWheel is offline
Junior Member
 
Posts: 30
Join Date: Feb 2017
Car: BMW
Default 04-19-2017, 10:22 AM

Sure thing, they should go up tomorrow on my website so be sure to check back as they tend to sell very quickly.

www.nelsonracingwheel.com


2010 BMW 135i - 526whp and 592tq on a DynoJet

FBO + VTT S1 + Inlets + 100% E85 Port Injection

Owner, www.NelsonRacingWheel.com
Reply With Quote
(#14)
Old
NelsonRacingWheel NelsonRacingWheel is offline
Junior Member
 
Posts: 30
Join Date: Feb 2017
Car: BMW
Default 05-02-2017, 01:22 PM

These are my third round of MY FINAL batch of the N54 Intake Manifold Flanges for Direct Port WMI or to build your own intake manifold!

Lots of people have made WMI applications and others are making custom intake manifolds to match their builds!

THIS WILL BE THE LAST EVER BATCH I MAKE. COMPARABLE UNITS COST WELL OVER $175 AND DO NOT COME WITH MY SPECIAL GASKETS - that are heat rated for 405* and fuel resistant.

Price is $95/each plus shipping. I have sold over 40 of these prior and they never last long.. so buy one for the future or miss out completely.

https://www.nelsonracingwheel.com/sh...luminum-flange


2010 BMW 135i - 526whp and 592tq on a DynoJet

FBO + VTT S1 + Inlets + 100% E85 Port Injection

Owner, www.NelsonRacingWheel.com
Reply With Quote
(#15)
Old
JuniorB JuniorB is offline
Junior Member
 
Posts: 314
Join Date: Mar 2016
Car: 2007 e60 5 series
Default 05-03-2017, 02:26 AM

You were advertising them 85 with shipping, now there 95 with shipping? They stated out of stock when I looked.
Reply With Quote
(#16)
Old
JuniorB JuniorB is offline
Junior Member
 
Posts: 314
Join Date: Mar 2016
Car: 2007 e60 5 series
Default 05-03-2017, 02:28 AM

Ps, what are guys using for the longer hardware? Th again.
Reply With Quote
(#17)
Old
NelsonRacingWheel NelsonRacingWheel is offline
Junior Member
 
Posts: 30
Join Date: Feb 2017
Car: BMW
Default 05-03-2017, 07:05 AM

I had to increase the cost a bit to cover the added 4mm. My shop didn't quote me correctly so I just rolled it into the new cost. It was about $9 per flange for the extra 4mm which wasnt too bad.


2010 BMW 135i - 526whp and 592tq on a DynoJet

FBO + VTT S1 + Inlets + 100% E85 Port Injection

Owner, www.NelsonRacingWheel.com
Reply With Quote
(#18)
Old
NelsonRacingWheel NelsonRacingWheel is offline
Junior Member
 
Posts: 30
Join Date: Feb 2017
Car: BMW
Default 05-03-2017, 07:06 AM

And they car back in stock too. Well, I had 10 and now have 4.


2010 BMW 135i - 526whp and 592tq on a DynoJet

FBO + VTT S1 + Inlets + 100% E85 Port Injection

Owner, www.NelsonRacingWheel.com
Reply With Quote
(#19)
Old
JuniorB JuniorB is offline
Junior Member
 
Posts: 314
Join Date: Mar 2016
Car: 2007 e60 5 series
Default 05-13-2017, 03:34 AM

Hi Steve, I was looking for one, any more left? Thank you.
Reply With Quote
(#20)
Old
NelsonRacingWheel NelsonRacingWheel is offline
Junior Member
 
Posts: 30
Join Date: Feb 2017
Car: BMW
Default 05-13-2017, 10:10 AM

Yep I have 3 left as of right now.

You can visit my site and use code "Scott" for a discount


2010 BMW 135i - 526whp and 592tq on a DynoJet

FBO + VTT S1 + Inlets + 100% E85 Port Injection

Owner, www.NelsonRacingWheel.com
Reply With Quote
(#21)
Old
JuniorB JuniorB is offline
Junior Member
 
Posts: 314
Join Date: Mar 2016
Car: 2007 e60 5 series
Default 05-14-2017, 08:48 AM

Steve, promo (Scott) is no longer available , any other promos, thank you
Reply With Quote
(#22)
Old
kayzrx8 kayzrx8 is offline
New Member
 
Posts: 16
Join Date: Nov 2016
Car: 2008 335i
Default 05-08-2018, 01:55 PM

Are these still available?
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2018, N54tech.com