N54Tech.com - International Turbo Racing Discussion
(#1)
Old
robc1976's Avatar
robc1976 robc1976 is offline
Demigod
 
Posts: 1,557
Join Date: Mar 2012
Car: 2007 335i
Default Finally got my 20" Concept one CS-5.0 rims!! - 10-19-2012, 02:19 AM

Got these from preferredcustoms (Great service!!). These actually fit a lot better than my 19's (no rubbing).

Here is a vid of the unboxing:



Here is a vid of them on the car:



Here is a pic of a 19" rim with a PSS 265/35/19 next to a 245/30/20 Nitto Invo...little less circumfrance.




Here are some pics of them on the car:





JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, VM 6466 ST, RB valve, BMS DCI, 3" AR ***, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsort, Delrin solid subfrane bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
Reply With Quote
(#2)
Old
Bimmer Barney's Avatar
Bimmer Barney Bimmer Barney is offline
Junior Member
 
Posts: 79
Join Date: Jan 2011
Car: 07 E90 335i
Default 10-27-2012, 10:27 AM

Those are gorgeous! Congrats!


2007 E90 335i - Sparkling Graphite Metallic - JB4, Mr.5 Intake, VRSF 7" FMIC, RB PCV Valve, BMS OCC, Evolution Racewerkes Sport Oil Cooler, Cyba Intake Scoops and Quad Exhaust Tips, M3 UCA/LCA, 17x9 and 17x9.5 Apex Arc-8
Reply With Quote
(#3)
Old
Jason @ BMS's Avatar
Jason @ BMS Jason @ BMS is offline
administartor
 
Posts: 323
Join Date: Oct 2008
Car: F80 M3
Default 12-01-2012, 08:44 PM

Nice! Those mix well with the car.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#4)
Old
robc1976's Avatar
robc1976 robc1976 is offline
Demigod
 
Posts: 1,557
Join Date: Mar 2012
Car: 2007 335i
Default 12-01-2012, 09:27 PM

Quote:
Originally Posted by Jason @ BMS
Nice! Those mix well with the car.
thanks man, the tires I am not happy with...they walk all over when data logging lol!!


JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, VM 6466 ST, RB valve, BMS DCI, 3" AR ***, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsort, Delrin solid subfrane bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
Reply With Quote
(#5)
Old
splitsecond splitsecond is offline
New Member
 
Posts: 1
Join Date: Oct 2012
Car: 135i
Default 12-02-2012, 07:01 AM

Are you selling the 19's?
Reply With Quote
(#6)
Old
robc1976's Avatar
robc1976 robc1976 is offline
Demigod
 
Posts: 1,557
Join Date: Mar 2012
Car: 2007 335i
Default 12-02-2012, 10:52 AM

Quote:
Originally Posted by splitsecond
Are you selling the 19's?
I was going to but keeping them because the nitto tire either suck or are bad in colder weather.


JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, VM 6466 ST, RB valve, BMS DCI, 3" AR ***, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsort, Delrin solid subfrane bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
Reply With Quote
(#7)
Old
LostMarine's Avatar
LostMarine LostMarine is offline
Senior Member
 
Posts: 688
Join Date: Jun 2009
Car: E92 DCT ///M
Default 12-03-2012, 10:02 AM

you selling the tires at least?
Reply With Quote
(#8)
Old
robc1976's Avatar
robc1976 robc1976 is offline
Demigod
 
Posts: 1,557
Join Date: Mar 2012
Car: 2007 335i
Default 12-03-2012, 11:41 AM

Quote:
Originally Posted by LostMarine
you selling the tires at least?
I have them on my car now...going to use them as winter tires and the 20's for summer LOL!!


JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, VM 6466 ST, RB valve, BMS DCI, 3" AR ***, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsort, Delrin solid subfrane bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
Reply With Quote
(#9)
Old
robc1976's Avatar
robc1976 robc1976 is offline
Demigod
 
Posts: 1,557
Join Date: Mar 2012
Car: 2007 335i
Default 07-04-2013, 10:37 PM

Need to update this post, these wheels are POS, they do not run true, they bent easily...finish is very cheap and peeled (I never hit anything) front rim bent pretty bad and I now have a bad vibration. These rims didn't even outlast a set of tires :thumbdown Just trying to save some people the headache of getting these huge paper weights. I will also say concept one has very poor customer service. Glad I ordered some real wheels...MORR anim:.

Also, if you get a bent rim from concept one or any problem they will not be replaced, I was told "once unpacked they are yours". pretty hard to examine them.....guess I need a X-ray machine LOL!


JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, VM 6466 ST, RB valve, BMS DCI, 3" AR ***, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsort, Delrin solid subfrane bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2018, N54tech.com