N54Tech.com - International Turbo Racing Discussion
(#276)
Old
LessIsMore's Avatar
LessIsMore LessIsMore is offline
Inner Circle Member
 
Posts: 1,185
Join Date: Aug 2012
Car: 2009 535i Sport SAT
Default 03-24-2020, 10:04 PM

I had a flashing CEL the other day on cold start.
Engine had a slightly rough idle. While CEL was flashing, I scanned for codes using the JB4 app with the engine running but none found. The CEL never went solid and no error msgs.

Stopped the engine , restarted and CEL was gone and idle was fine. Drove around for hours right afterwards and had no issues, and haven't since.

Not too worried as it seems like a one time hiccup so far. Just an FYI and to see if anyone has input.
Thanks

4/22/20 Update: this has not recurred yet


2017 AMG C63 - JB4 - 11.69 @ 127 (dragy)
2009 BMW 535i - 548 whp - sold

Last edited by LessIsMore; 04-22-2020 at 03:59 PM..
Reply With Quote
(#277)
Old
Okayandre Okayandre is offline
New Member
 
Posts: 1
Join Date: Apr 2020
Car: 2017 Mercedes c63s
Default Issues - 04-29-2020, 10:50 AM

Hey guys i have the 2017 c63s, f1 *********, straight piped all the way through, BMS intakes, plus the jb4 tune.

My idol is really rough. If I sit at a light for to long in any map but map 1 my engine light will start flashing n mid fires occur. When the car is moving itís fine just when I stop I see problems.

I started running 30% mixture e85 and it ran great in map 3/4 the whole
Day but towards the end once I started doing pulls the jb4 kept putting itself to map 8 ďvalet modeĒ my boost safety is at 25 and fuel loop is at 30 so Iím not sure whatís going on. Any 3rd gear pull as soon as I hit high rpms itís straight to map 8.

If someone can give me some insight that would be much appreciated.
Reply With Quote
(#278)
Old
spikiii's Avatar
spikiii spikiii is offline
JB4 addict
 
Posts: 106
Join Date: Dec 2012
Car: powered by JB4
Default 05-01-2020, 06:49 PM

Been using v4 for a while now with no dramas - smooth transitions

random question - did the firmware files get removed from first post? can't see them there anymore
Reply With Quote
(#279)
Old
BimmerFan BimmerFan is offline
Junior Member
 
Posts: 262
Join Date: Mar 2014
Car: 2014 335i M-Sport
Default 05-13-2020, 09:16 AM

The firware files are located here now: Platform Firmware Manager Yeah, it took me a minute as well. A version 6 is now available.


2018 C63s AMG
JB4 E30, Pedal Tuner
Reply With Quote
(#280)
Old
chongl chongl is offline
New Member
 
Posts: 8
Join Date: Sep 2019
Car: 2017 C63
Default 05-13-2020, 09:21 AM

I wonder if true boost by gear has been implemented yet

Anyone running E30 mix in CA on map 3? I'm still on map 2
Reply With Quote
(#281)
Old
BimmerFan BimmerFan is offline
Junior Member
 
Posts: 262
Join Date: Mar 2014
Car: 2014 335i M-Sport
Default 05-13-2020, 09:25 AM

I feel for you Cali guys. Running E30 on Map 5; 93 octane . It's retarded


2018 C63s AMG
JB4 E30, Pedal Tuner
Reply With Quote
(#282)
Old
spikiii's Avatar
spikiii spikiii is offline
JB4 addict
 
Posts: 106
Join Date: Dec 2012
Car: powered by JB4
Default 05-13-2020, 03:06 PM

Quote:
Originally Posted by BimmerFan
The firware files are located here now: Platform Firmware Manager Yeah, it took me a minute as well. A version 6 is now available.
Thanks mate!
Reply With Quote
(#283)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 32,846
Join Date: Jan 2008
Default 05-14-2020, 08:22 PM

Quote:
Originally Posted by chongl
I wonder if true boost by gear has been implemented yet

Anyone running E30 mix in CA on map 3? I'm still on map 2
We don't have gear in there yet but boost by speed remains active and one of the most useful user adjustments in the app!


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#284)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 32,846
Join Date: Jan 2008
Default 05-14-2020, 08:22 PM

Quote:
Originally Posted by spikiii
Been using v4 for a while now with no dramas - smooth transitions

random question - did the firmware files get removed from first post? can't see them there anymore
It's in the app now, and a link is provided for those few using a datacable/laptop.


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#285)
Old
spikiii's Avatar
spikiii spikiii is offline
JB4 addict
 
Posts: 106
Join Date: Dec 2012
Car: powered by JB4
Default 05-14-2020, 08:59 PM

Quote:
Originally Posted by Terry @ BMS
It's in the app now, and a link is provided for those few using a datacable/laptop.
ahhh most users on the bluetooth app now.

lol thanks for not forgetting about us old USB cable uesrs :D
Reply With Quote
(#286)
Old
jagger230 jagger230 is offline
New Member
 
Posts: 26
Join Date: Jan 2019
Car: Volkswagen GOLF R
Default 2018 Mercedes E63S - 06-03-2020, 06:47 AM

hi there, i run 94 petro canada in my E63S
i wanna to run map 3 map 1 and 2 seem good on 94 octane. what do you guys recommend for me to do in order to run map 3. my best time is 10.58 in 132 mph on map 2 on 94 octane. let me know what you guys think. which octane booster is the one you guys recommend
Reply With Quote
(#287)
Old
LessIsMore's Avatar
LessIsMore LessIsMore is offline
Inner Circle Member
 
Posts: 1,185
Join Date: Aug 2012
Car: 2009 535i Sport SAT
Default 06-08-2020, 10:34 AM

You need meth injection, ethanol (E85), or race gas for maps 3 - 5. I run those maps successfully on my C63 with about E30-E35 mix, by mixing E85 and 93 pump.

None of the octane boosters you can buy and add to the tank of pump gas are going to be enough.


2017 AMG C63 - JB4 - 11.69 @ 127 (dragy)
2009 BMW 535i - 548 whp - sold
Reply With Quote
(#288)
Old
jagger230 jagger230 is offline
New Member
 
Posts: 26
Join Date: Jan 2019
Car: Volkswagen GOLF R
Default 06-10-2020, 09:36 AM

Hi guys I got a code on my E63s 2018
Here are the codes
P0300-22
P0305-00
P0306-00
P03008-00
Do you guys think I need to change spark plugs sometimes I have a rough ideal.
What do you guys think? The code doesnít clear it comes right back w a flashing check engine and idles very rough
Reply With Quote
(#289)
Old
LessIsMore's Avatar
LessIsMore LessIsMore is offline
Inner Circle Member
 
Posts: 1,185
Join Date: Aug 2012
Car: 2009 535i Sport SAT
Default 06-17-2020, 11:55 AM

those are misfires i believe. Do you get them on map 0 or just higher maps?


2017 AMG C63 - JB4 - 11.69 @ 127 (dragy)
2009 BMW 535i - 548 whp - sold
Reply With Quote
(#290)
Old
jagger230 jagger230 is offline
New Member
 
Posts: 26
Join Date: Jan 2019
Car: Volkswagen GOLF R
Default 06-17-2020, 07:37 PM

I get them in all the maps just changed an injector on warranty and only 4 spark plugs maybe I should change the other 4 as well?
Reply With Quote
(#291)
Old
18bora 18bora is offline
New Member
 
Posts: 22
Join Date: Aug 2017
Car: C43
Default 06-27-2020, 05:54 PM

I just finished installing it on my 2020 glc63. It fired up without any CEL's, but I don't have RPM or throttle readings. Everything is connected properly, I even unplugged and plugged the obd2 wire and still no rpm/throttle.
Reply With Quote
(#292)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 32,846
Join Date: Jan 2008
Default 06-27-2020, 09:30 PM

If it's a 2020 model be sure to update to the 2020 C63 firmware to enable CANbus!


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#293)
Old
18bora 18bora is offline
New Member
 
Posts: 22
Join Date: Aug 2017
Car: C43
Default 06-28-2020, 08:14 AM

Quote:
Originally Posted by Terry @ BMS
If it's a 2020 model be sure to update to the 2020 C63 firmware to enable CANbus!
I keep getting error message



Reply With Quote
(#294)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 32,846
Join Date: Jan 2008
Default 06-29-2020, 11:21 AM

Ah yes that was an app bug, I think you emailed me about it?


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#295)
Old
18bora 18bora is offline
New Member
 
Posts: 22
Join Date: Aug 2017
Car: C43
Default 06-29-2020, 03:25 PM

Quote:
Originally Posted by Terry @ BMS
Ah yes that was an app bug, I think you emailed me about it?
Got the update and it's working now, Thanks.

I did a couple of pulls this morning (before the fix) and I got decent numbers.



My best 0-60 stock


I ran out of road on the 1/4 mile run and had to hit the brakes.



My best 1/4 times stock. Based on the 1/8th times, I'm getting around 5mph over stock.

Reply With Quote
(#296)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 32,846
Join Date: Jan 2008
Default 06-29-2020, 05:04 PM

Looks like a good start. Hopefully now with CANbus active you can log the runs!


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#297)
Old
HashtagC63 HashtagC63 is offline
New Member
 
Posts: 2
Join Date: Jul 2020
Car: 2017 C63
Default 07-10-2020, 09:26 AM

Hey all,

I've read through this entire thread and it seems like it is possible to stack an aftermarket ECU tune and JB4. What is the best method to get dialed it properly? Who exactly should I message or email with Map 0 logs?

Thanks!
Reply With Quote
(#298)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 32,846
Join Date: Jan 2008
Default 07-11-2020, 11:11 AM

Yes just post or email the map0 logs to terry@burgertuning.com and I can help you get it dialed in!


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#299)
Old
HashtagC63 HashtagC63 is offline
New Member
 
Posts: 2
Join Date: Jul 2020
Car: 2017 C63
Default 07-15-2020, 12:51 AM

I just emailed Terry, but also wanted to include them here in case anyone else on the forum wanted to chime in.

The two most recent files were short highway pulls to redline. The older file was a dyno pull in 5th gear. All done on map 0 with 93 oct.

Thanks!
Attached Files
File Type: csv P27_M0_R1_200711_174756.csv (6.6 KB, 49 views)
File Type: csv P27_M0_R1_200711_173552.csv (8.8 KB, 55 views)
File Type: csv 2019-12-09 09_25_08_Map-0.csv (8.4 KB, 58 views)
Reply With Quote
(#300)
Old
jagger230 jagger230 is offline
New Member
 
Posts: 26
Join Date: Jan 2019
Car: Volkswagen GOLF R
Default 08-08-2020, 11:12 AM

hey so again i have misfire codes,P0305, P0306, P0308 those cylinder did in fact have spark plugs and injectors changed at the dealer i changed 6 injectors and all the spark plugs the car went on limp mode twice because it showed the afr was lean. i have a E63 S AMG 2018 im a lost of words of what to do. its either someone helps me to solve the problem or im removing the unit from the car
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright © 2007 - 2020, N54tech.com