N54Tech.com - International Turbo Racing Discussion
(#1576)
Old
bradsm87 bradsm87 is offline
Junior Member
 
Posts: 355
Join Date: May 2014
Car: E90 LCI 335i
Default 10-12-2015, 03:14 AM

Quote:
Originally Posted by Bullitt1841
What is the purpose of not clearing all other modules after a map write? I now have to manually clear these modules and their codes every time I change maps.

Now the overall process is much, much longer than the original time, not 10 seconds faster.
Agreed.

Martial, would you consider making this an option. I don't mind the shadow faults but it's annoying clearing the errors on the i-drive screen every time.
Reply With Quote
(#1577)
Old
jwdominick's Avatar
jwdominick jwdominick is offline
Junior Member
 
Posts: 301
Join Date: Aug 2014
Car: 08 535ix
Default 10-12-2015, 06:49 AM

havent seen it posted anywhere in this thread but I may have missed it. For those of us using the n20 tmap does the mhd allow for that signal without the jb4? additionally, what are the boost ranges of the built in stand alone mhd maps?



'08 535xi 6m, ACT 6 Puck Race Clutch / AR Design **'s / AFE Twin Power DCI / VTT Inlets / VRSF CP / TIAL BOV / Big Tom style IC / Fuel-It Stg2 LPFP / NGK 5992's @.022 / N20 T-Map / MHD Flash....100% e85 @24psi on stock snails!
Reply With Quote
(#1578)
Old
Russjonesr's Avatar
Russjonesr Russjonesr is offline
Senior Member
 
Posts: 552
Join Date: Jul 2014
Car: Bmw e92 335i
Default 10-12-2015, 07:23 AM

Quote:
Originally Posted by jwdominick
havent seen it posted anywhere in this thread but I may have missed it. For those of us using the n20 tmap does the mhd allow for that signal without the jb4? additionally, what are the boost ranges of the built in stand alone mhd maps?
http://www.e90post.com/forums/showth...096247&page=39

Looks like anything over 22.5psi a JB4 is still required.
Reply With Quote
(#1579)
Old
Duperstar Duperstar is offline
Junior Member
 
Posts: 213
Join Date: May 2012
Car: 2009 535i xdrive
Default 10-12-2015, 08:38 AM

Quote:
Originally Posted by Blind35
hello
i have FBO and !!!JB4 G4!!!
can i flashing PUMP MAP?
or it's map only for JB4 G5 ISO???
G5 ISO only for backend flashes


2009 535xi - JB4 G5 ISO -BMS Race Flash- BMS Intake - ER CP- Forge DVs- Active Autowerke intercooler- Gone

Activehybrid 3 - JB4 EWG/OBD- CTS Turbo Intake- VRSF CP- Bavsound Stage 1- current
Reply With Quote
(#1580)
Old
HunterR HunterR is offline
New Member
 
Posts: 18
Join Date: Apr 2015
Car: 07 335i
Default 10-12-2015, 10:01 AM

Sacked up and just bought a $50 laptop at walmart, flash went as planned. Works great!
Reply With Quote
(#1581)
Old
jwdominick's Avatar
jwdominick jwdominick is offline
Junior Member
 
Posts: 301
Join Date: Aug 2014
Car: 08 535ix
Default 10-12-2015, 11:02 AM

Quote:
Originally Posted by Russjonesr
http://www.e90post.com/forums/showth...096247&page=39

Looks like anything over 22.5psi a JB4 is still required.
darn! thanks for the link



'08 535xi 6m, ACT 6 Puck Race Clutch / AR Design **'s / AFE Twin Power DCI / VTT Inlets / VRSF CP / TIAL BOV / Big Tom style IC / Fuel-It Stg2 LPFP / NGK 5992's @.022 / N20 T-Map / MHD Flash....100% e85 @24psi on stock snails!
Reply With Quote
(#1582)
Old
iWorkTooMuch iWorkTooMuch is offline
New Member
 
Posts: 15
Join Date: Oct 2015
Car: 2009 E90 335i
Default 10-12-2015, 05:34 PM

I'm sitting in my 09 335i going through the directions step by step, I have updated the JB4 software and am ready to apply a MHD /JB4 backend flash but when I open the JB4 app and look under "read only" it does not show me the type I will need. It is only displaying ( Baro Pressure, Firmware Version, Interface Version, AVg Ign Retard, Future Use F )

Would someone please let me know what I am doing wrong?

-Justin

Last edited by iWorkTooMuch; 11-17-2015 at 02:56 PM..
Reply With Quote
(#1583)
Old
500hp500tq 500hp500tq is offline
Junior Member
 
Posts: 463
Join Date: Sep 2014
Car: 135i
Default Does BT Cable work with MDH - 10-12-2015, 06:07 PM

Does BT Cable work with MDH?



|2008 135i N54 | VRSF FBO| Motiv Port Injection | BMS PI Controller| AD-E ST Kit 6062 | JB4 G5 ISO 13.0 | BMS ST/MHD E85 Flash | 60% e70 | Fuel-It Stage3 LPFP | Spec2+/SMFW |3.5 TMAP | NLS

"stock"
Reply With Quote
(#1584)
Old
AWSAWS's Avatar
AWSAWS AWSAWS is offline
Demigod
 
Posts: 1,524
Join Date: Aug 2014
Car: 335i MSport DCT
Default 10-13-2015, 06:04 AM

Quote:
Originally Posted by 500hp500tq
Does BT Cable work with MDH?
No. You need the Dcan and USBOTG


UK FBO 335i, GCs, JB4, PI meth, BMS CP, OCC, Braided brake lines. Diff Lockdown. TMAP sensor, custom bucketless stage2

11.79@119mph on stockers, CP meth (UK, Santa Pod)
11.74@129mph on GCs, custom port meth injection.
Reply With Quote
(#1585)
Old
Fmonteiro444's Avatar
Fmonteiro444 Fmonteiro444 is offline
Senior Member
 
Posts: 629
Join Date: Aug 2013
Car: 09 E92 SG
Default 10-13-2015, 10:50 AM

Quote:
Originally Posted by Russjonesr
http://www.e90post.com/forums/showth...096247&page=39

Looks like anything over 22.5psi a JB4 is still required.
Or MaxBoost from Wedge


----------------------------------------------------
14 F30 335xi AT- Built Closed-Deck N55, SpeedTech Stage 3 w/ BW-8374C, MHD Flash, xHP Flash, E85, AFE Intake, VRSF 6" Race FMIC, VRSF CP, Fuel-it Stage 2 LPFP and PI
----------------------------------------------------
16 Audi S6 - APR Stage 2 ECU/TCU flash, APR Exhaust, SRM Intakes
Reply With Quote
(#1586)
Old
Izero Izero is offline
Junior Member
 
Posts: 37
Join Date: Sep 2015
Car: 2008 E90 335 xi
Default 10-13-2015, 01:58 PM

Are there any suggest Tablets for the MHD flasher?

What has everyone seen the best results with? I'm having trouble finding information all in one place... and I'm not sure if I should just do a JB4 back end flash and spend the $200 for the BT Cable or if I should spend my money on the MHD flasher....?

It's been difficult reading through 57-ish pages of this thread... so just curious if there is a beginner guide to get started with this....?
Reply With Quote
(#1587)
Old
Deen@StreetKingImports's Avatar
Deen@StreetKingImports Deen@StreetKingImports is offline
Junior Member
 
Posts: 432
Join Date: Aug 2014
Car: 2013 Genesis Coupe
Default 10-13-2015, 03:17 PM

What does map 7 target with MHD flash now? I keep getting kicked to map 4 and looks like I'm hitting 20 psi or so
Reply With Quote
(#1588)
Old
viperware viperware is offline
Junior Member
 
Posts: 273
Join Date: Jan 2014
Car: 2010 535i
Default 10-13-2015, 03:44 PM

Quote:
Originally Posted by Izero
Are there any suggest Tablets for the MHD flasher?

What has everyone seen the best results with? I'm having trouble finding information all in one place... and I'm not sure if I should just do a JB4 back end flash and spend the $200 for the BT Cable or if I should spend my money on the MHD flasher....?

It's been difficult reading through 57-ish pages of this thread... so just curious if there is a beginner guide to get started with this....?
This is the tablet a lot of us were buying when the flash came out. It is sold out now, but there are some used ones available which would be just fine, save a few bucks even.

http://www.amazon.com/gp/aw/d/B00MYG...roduct_details

I use it for MHD flasher and with the JB4 mobile app for gauges and logging and it is plenty to do those things. Any android tablet with OTG usb capability should work though. This one was nice because it was $40 and came with an OTG cable.

I also bought this USB power cable to keep it charged while using th OTG port.

http://www.amazon.com/gp/aw/d/B00IPE...s=dc+2.5mm+usb


Reply With Quote
(#1589)
Old
Dirty Dog's Avatar
Dirty Dog Dirty Dog is offline
Junior Member
 
Posts: 224
Join Date: Jan 2011
Car: 135i
Default 10-13-2015, 04:03 PM

Quote:
Originally Posted by Deen@StreetKingImports
What does map 7 target with MHD flash now? I keep getting kicked to map 4 and looks like I'm hitting 20 psi or so
My map 7 is also targeting 20psi recently. It use to target 18.5psi. Mine isn't kicking me to map 4 though.


135i - JB4 15ohm l Mr 5 Intake l AA C@tless ********* l ETS Intercooler l BMS Methanol Injection l Berk Tech Mids l Berk Tech Axleback l BMS OCC l ER CP l Turbosmart BOV's. SOLD

335i DCT - JB4 G5 ISO l AA C@tless ********* l ETS Intercooler l Custom Intake l Meth l BMS E85 Flash l BMS OCC l ER CP l Walbro 255 l Turbosmart BOV's. CURRENT
Reply With Quote
(#1590)
Old
PLF's Avatar
PLF PLF is offline
Junior Member
 
Posts: 130
Join Date: Sep 2015
Car: 135i
Default 10-13-2015, 04:21 PM

Quote:
Originally Posted by Dirty Dog
My map 7 is also targeting 20psi recently. It use to target 18.5psi. Mine isn't kicking me to map 4 though.

I have noticed that when I change my max boost threshold (ex: 19, 20 or 21psi) then my Map 7 target changes accordingly to (ex: 17.5, 18.5 and 19.5)
Reply With Quote
(#1591)
Old
Deen@StreetKingImports's Avatar
Deen@StreetKingImports Deen@StreetKingImports is offline
Junior Member
 
Posts: 432
Join Date: Aug 2014
Car: 2013 Genesis Coupe
Default 10-13-2015, 04:23 PM

Quote:
Originally Posted by PLF
I have noticed that when I change my max boost threshold (ex: 19, 20 or 21psi) then my Map 7 target changes accordingly to (ex: 17.5, 18.5 and 19.5)
Where do you change that at?
Reply With Quote
(#1592)
Old
Deen@StreetKingImports's Avatar
Deen@StreetKingImports Deen@StreetKingImports is offline
Junior Member
 
Posts: 432
Join Date: Aug 2014
Car: 2013 Genesis Coupe
Default 10-13-2015, 04:24 PM

Quote:
Originally Posted by Dirty Dog
My map 7 is also targeting 20psi recently. It use to target 18.5psi. Mine isn't kicking me to map 4 though.
What is your fail safe set at? Are you running the n20 tmap sensor?
Reply With Quote
(#1593)
Old
Duperstar Duperstar is offline
Junior Member
 
Posts: 213
Join Date: May 2012
Car: 2009 535i xdrive
Default 10-13-2015, 04:27 PM

Quote:
Originally Posted by Izero
Are there any suggest Tablets for the MHD flasher?

What has everyone seen the best results with? I'm having trouble finding information all in one place... and I'm not sure if I should just do a JB4 back end flash and spend the $200 for the BT Cable or if I should spend my money on the MHD flasher....?

It's been difficult reading through 57-ish pages of this thread... so just curious if there is a beginner guide to get started with this....?
My sister gave me her old Galaxy s3 and that works very well. MHD is worth it, I literally just switched 2 days ago from BB and it fixed a slow spool issue I was having. I also get 3 more mpg on the same trip.


2009 535xi - JB4 G5 ISO -BMS Race Flash- BMS Intake - ER CP- Forge DVs- Active Autowerke intercooler- Gone

Activehybrid 3 - JB4 EWG/OBD- CTS Turbo Intake- VRSF CP- Bavsound Stage 1- current
Reply With Quote
(#1594)
Old
Dirty Dog's Avatar
Dirty Dog Dirty Dog is offline
Junior Member
 
Posts: 224
Join Date: Jan 2011
Car: 135i
Default 10-13-2015, 06:23 PM

Quote:
Originally Posted by Deen@StreetKingImports
What is your fail safe set at? Are you running the n20 tmap sensor?
Failsafe is set to 21psi. Stock tmap sensor.


135i - JB4 15ohm l Mr 5 Intake l AA C@tless ********* l ETS Intercooler l BMS Methanol Injection l Berk Tech Mids l Berk Tech Axleback l BMS OCC l ER CP l Turbosmart BOV's. SOLD

335i DCT - JB4 G5 ISO l AA C@tless ********* l ETS Intercooler l Custom Intake l Meth l BMS E85 Flash l BMS OCC l ER CP l Walbro 255 l Turbosmart BOV's. CURRENT
Reply With Quote
(#1595)
Old
Izero Izero is offline
Junior Member
 
Posts: 37
Join Date: Sep 2015
Car: 2008 E90 335 xi
Default 10-14-2015, 06:51 AM

Quote:
Originally Posted by viperware
This is the tablet a lot of us were buying when the flash came out. It is sold out now, but there are some used ones available which would be just fine, save a few bucks even.

http://www.amazon.com/gp/aw/d/B00MYG...roduct_details

I use it for MHD flasher and with the JB4 mobile app for gauges and logging and it is plenty to do those things. Any android tablet with OTG usb capability should work though. This one was nice because it was $40 and came with an OTG cable.

I also bought this USB power cable to keep it charged while using th OTG port.

http://www.amazon.com/gp/aw/d/B00IPE...s=dc+2.5mm+usb


Would this one work? Or does it have to have kit*** 4.4?
http://www.amazon.com/gp/aw/d/B00VO1...nfL&ref=plSrch

I'm very new to this MHD thing but I need something that will fix my timing problems on the JB4... And I'm having trouble finding how-to's and FAQs for it that don't contradict each other or don't make sense (yet)
Reply With Quote
(#1596)
Old
Deen@StreetKingImports's Avatar
Deen@StreetKingImports Deen@StreetKingImports is offline
Junior Member
 
Posts: 432
Join Date: Aug 2014
Car: 2013 Genesis Coupe
Default 10-14-2015, 01:04 PM

Quote:
Originally Posted by Dirty Dog
Failsafe is set to 21psi. Stock tmap sensor.
Makes sense why you're not going into map4. Just didn't realize map 7 targets boost that high???
Reply With Quote
(#1597)
Old
rmj335i rmj335i is offline
New Member
 
Posts: 26
Join Date: Jun 2015
Car: e90 335i 2009
Default 10-14-2015, 05:37 PM

Has anyone used VMWare and Android to run MHD Flasher? I previously did but now i am having issues where the application will not open.
Reply With Quote
(#1598)
Old
viperware viperware is offline
Junior Member
 
Posts: 273
Join Date: Jan 2014
Car: 2010 535i
Default 10-14-2015, 06:10 PM

Quote:
Originally Posted by Izero
Would this one work? Or does it have to have kit*** 4.4?
http://www.amazon.com/gp/aw/d/B00VO1...nfL&ref=plSrch

I'm very new to this MHD thing but I need something that will fix my timing problems on the JB4... And I'm having trouble finding how-to's and FAQs for it that don't contradict each other or don't make sense (yet)
Yeah it should work, I couldn't tell from the description of it comes with the OTG adapter or not.


Reply With Quote
(#1599)
Old
Bullitt1841's Avatar
Bullitt1841 Bullitt1841 is offline
Legend
 
Posts: 1,463
Join Date: Aug 2011
Car: '07 335i Sedan, Built & Blown '08 Mustang Bullitt
Default 10-15-2015, 12:05 AM

If we send someone our stock bin by selecting 'back up the ECU,' then they tweak it for us, do we load it by choosing 'flash a custom map' or 'flash a JB4 backend?'

Vehicle info: ECU already has BMS JB4 backend loaded, along with JB4 still physically installed.


2018 Audi RS3 | Stage 1 E85 and 91 Flashes | JB4 for Logging

SOLD: 2017 F36 440i Gran Coupe | PS2 | MPPSK | Track Handling Package | JB4

SOLD: 2007 E90 335i | PS2's | JB4 | FBO | 160k+ miles on the car, 120k+ miles on the JB4

Log, log, then log some more...
Reply With Quote
(#1600)
Old
dorci's Avatar
dorci dorci is offline
New Member
 
Posts: 12
Join Date: Apr 2015
Car: 135i 09'
Default 10-15-2015, 05:36 AM

Hello,

I flashed my car with the mhd flasher, the ijeos mhd backendflash e85. My car won't start. I was to map 0. I tried Different map.
Tested my own .Bin and modifying it with the xdf in tunerpro. Never starting..

I'm desesperat. Maybe I need to unplug the jb4 and flash the
Ecu directly. Let me know backendflash don t need to be modified normally ?

Thanks
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2018, N54tech.com