N54Tech.com - International Turbo Racing Discussion
(#1)
Old
Sideways the Seven Sideways the Seven is offline
New Member
 
Posts: 7
Join Date: Dec 2019
Car: 2016 Q50 3.0t Premium
Default 2016 Q50 3.0t Prem on 93 octane and Map 6 - 12-02-2019, 01:54 PM

Hello guys, new member here.

Looking for some feedback on my logs. Been looking for ideal settings for my application. I've been running 93 octane but have easy access to E85, if I need that as well. I appreciate any help or direction you guys can give. Thanks!
Attached Files
File Type: csv 2019-12-02 07_14_06_Map-6.csv (412.5 KB, 5 views)
Reply With Quote
(#2)
Old
Lonmon Lonmon is offline
Junior Member
 
Posts: 96
Join Date: Oct 2019
Car: 16 Infiniti Q50 3.0t AWD
Default 12-02-2019, 02:20 PM

I can't use this log. There is way too much and I can't find a decent pull quickly. You need to go out and find a good flat stretch of road, start in second gear around 2500 rpms, start the log then go full throttle till the car gets well into 4th gear (SAFELY!!). Then let us look at the log. You can do this a couple of times if you like just to make sure to get some good data. The partial throttle info just makes it difficult to find what we need to see, especially when the log is very long. Most logs only need to be 30 seconds or less. At this level of modification the partial throttle information is not too important unless we are trying to diagnose a specific issue. I would not go beyond +6 in your map until we verify that everything looks good, especially when only on 93.


2016 Q50 Premium 3.0t AWD
K&N drop ins
Megan Racing Lowers
Megan Racing Y p!p3
BMS Heat Exchanger
JB4 W/fuel wires Map 6 custom
E20ish mix made 413whp 410wtq (17-18psi peak)

Last edited by Lonmon; 12-02-2019 at 02:25 PM..
Reply With Quote
(#3)
Old
Lonmon Lonmon is offline
Junior Member
 
Posts: 96
Join Date: Oct 2019
Car: 16 Infiniti Q50 3.0t AWD
Default 12-02-2019, 02:24 PM

Look at the map from Serstylz2 on page 197 of the top topic. Use this map but replace the 7's with 6's until we look at the logs. Then if everything looks good you can insert the +7's and let us look at the logs again.


2016 Q50 Premium 3.0t AWD
K&N drop ins
Megan Racing Lowers
Megan Racing Y p!p3
BMS Heat Exchanger
JB4 W/fuel wires Map 6 custom
E20ish mix made 413whp 410wtq (17-18psi peak)
Reply With Quote
(#4)
Old
Sideways the Seven Sideways the Seven is offline
New Member
 
Posts: 7
Join Date: Dec 2019
Car: 2016 Q50 3.0t Premium
Default 12-02-2019, 02:31 PM

Quote:
Originally Posted by Lonmon
I can't use this log...
Quote:
Originally Posted by Lonmon
Look at the map from Serstylz2 on page 197 of the top topic. Use this map but replace the 7's with 6's until we look at the logs. Then if everything looks good you can insert the +7's and let us look at the logs again.
Will do. Thanks for the quick reply!


2016 Q50 3.0t
*HKS BOV
*Infiniti Sport exhaust
*JB4
Reply With Quote
(#5)
Old
Sideways the Seven Sideways the Seven is offline
New Member
 
Posts: 7
Join Date: Dec 2019
Car: 2016 Q50 3.0t Premium
Default 12-03-2019, 10:47 AM

Updated. Here are the new logs. Thank you!
Attached Files
File Type: csv 2019-12-03 11_28_01_Map-6.csv (12.7 KB, 3 views)
File Type: csv 2019-12-03 11_33_41_Map-6.csv (15.2 KB, 6 views)


2016 Q50 3.0t
*HKS BOV
*Infiniti Sport exhaust
*JB4
Reply With Quote
(#6)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 29,981
Join Date: Jan 2008
Default 12-03-2019, 01:34 PM

Keep in mind tuning is disabled until engine is warmed up. The warmed up log looks OK to me though at first glance.
Attached Images
 


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#7)
Old
Sideways the Seven Sideways the Seven is offline
New Member
 
Posts: 7
Join Date: Dec 2019
Car: 2016 Q50 3.0t Premium
Default 12-03-2019, 01:43 PM

Quote:
Originally Posted by Terry @ BMS
Keep in mind tuning is disabled until engine is warmed up. The warmed up log looks OK to me though at first glance.
Ah, good to know, thank you!

I'm still learning about this platform. I appreciate the feedback!


2016 Q50 3.0t
*HKS BOV
*Infiniti Sport exhaust
*JB4
Reply With Quote
(#8)
Old
Sideways the Seven Sideways the Seven is offline
New Member
 
Posts: 7
Join Date: Dec 2019
Car: 2016 Q50 3.0t Premium
Default Yesterday, 08:33 AM

Found a nice clear road to get a really good pull last night. How do these look? If I'm reading this correctly, everything looks okay.
Attached Files
File Type: csv 2019-12-04 20_45_10_Map-6.csv (13.4 KB, 6 views)


2016 Q50 3.0t
*HKS BOV
*Infiniti Sport exhaust
*JB4
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2019, N54tech.com