 |
|
||||
| |||||
|
||||||
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
(#1)
|
|
|||
Throwing codes after updating JB4 Firmware & BEF -
07-09-2017, 10:37 AM
I've been running JB4 and �� less ********* for quite some time now on my '09 135i with no issues.
I just got finished walnut blasting and installing: VRSF 7" FMIC silicone inlets charge pipe w/ Tial BOV Stage 2 Fuel-It LPFP NGK 95770 gapped at 0.022" I then updated to the latest JB4 firmware, filled up with 8 gallons E85/4 gallons 93 and flashed the latest E85 backend flash. After that the car is running great (except for major clutch slipping in 4th+ gears from all the new torque ) but now I keep throwing a SES light for "******* ********* detected". I thought maybe I just had to enable auto clear again via the steering wheel control (menu 1 option 3), but I've done this a couple times now and the code keeps coming back...  
|
|
(#2)
|
|
||||
07-09-2017, 10:46 AM
If using competition race use only parts you're going to have a CEL on unless you disable it in the MHD flash software directly.
Home of the JB4 the worlds most popular turbocharged tuning system! It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
|
(#4)
|
|
||||
|
07-09-2017, 11:03 AM
Home of the JB4 the worlds most popular turbocharged tuning system! It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
|
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
Linear Mode
|
|
Copyright © 2007 - 2022, JB4tech.com