N54Tech.com - International Turbo Racing Discussion
(#226)
Old
reyes104 reyes104 is offline
New Member
 
Posts: 7
Join Date: Jan 2020
Car: q50
Default Re-log on map 2 - 05-27-2020, 09:58 AM

Hi Terry,
Thank you so much for the feedback ! As requested, Here is my log on map 2

Much appreciated for the help !

settings:
duty bias all 50
pid 20
auto shift 60
ff 60

mods:
jb4
map2
91oct
lip
muffler delete
Attached Files
File Type: csv 20200527_092602_runs(1).csv (5.6 KB, 9 views)
Reply With Quote
(#227)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 31,271
Join Date: Jan 2008
Default 05-27-2020, 10:51 AM

Looks good to me on map2, I'd stick with that.


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#228)
Old
reyes104 reyes104 is offline
New Member
 
Posts: 7
Join Date: Jan 2020
Car: q50
Default 05-27-2020, 12:18 PM

Will do ! Thanks again for the help !
Reply With Quote
(#229)
Old
V@pors's Avatar
V@pors V@pors is offline
New Member
 
Posts: 21
Join Date: Jan 2019
Car: 2017 Infiniti Q60 RS AWD
Default 05-29-2020, 05:54 PM

Hoping I just got lost in the shuffle. Anyone able to look at my logs from post #204? thank you.


2017 Q60 RS400 AWD Midnight Black/Monaco Red
AMS Cold Air Intake | AMS Heat Exchanger | AMS Coolant Expansion Tank
BMS JB4 w/Fuel & EWG Wires | Z1/HKS BOV kit | Fast Intentions catted FDP's | HKS Legamax CBE | Mishimoto OCC
Z1 2-piece rotors | HRE FF04 10x20" front 11x20" rear rims | Pirelli PZero PZ4 tires 265/35/20 x 305/30/20
Blackview DR750s-2CH camera system| Blackview Power Magic Pro
Reply With Quote
(#230)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 31,271
Join Date: Jan 2008
Default 05-29-2020, 07:04 PM

Quote:
Originally Posted by V@pors
Just installed the EWG wires on my Q60 RS AWD. Would appreciate any input on these logs:

I have settings set to defaults suggested on 1st page, Fuel Wires enabled, and Bit 6 turned on (RS)

Running 91 octane, 88 F today, 4,500 ft elevation

Run 1: Map 0
Run 2: Map 1

Thanks in advance!
Boost seems lower than it should be. Do another log or two to evaluate.


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#231)
Old
Jdm010697 Jdm010697 is offline
New Member
 
Posts: 1
Join Date: May 2020
Car: 2018 q50 luxe RWD
Default 2018 Q50 luxe RWD EWG HELP - 05-29-2020, 07:46 PM

i recently installed the ewg connectors. i have already had the jb4 w/ fuel wires for a while now with no issues. however once i added the EWG connectors the car is pulling alot of timing during the pull. below i will post a 4th gear log that had terrible timing and a 3rd gear pull that had good timing. (both on same ewg setting) not sure if i should adjust any setting as they are how the forum said to start them

mods: ldp
muffler/res delete
heat X
Attached Files
File Type: csv Run #1.csv (5.0 KB, 4 views)
File Type: csv Run #2 Bad log.csv (5.6 KB, 5 views)

Last edited by Jdm010697; 05-29-2020 at 07:56 PM.. Reason: forgot mods
Reply With Quote
(#232)
Old
Dgvr6's Avatar
Dgvr6 Dgvr6 is offline
Junior Member
 
Posts: 37
Join Date: Apr 2020
Car: 2016 S6 and 2018 q50
Default 05-29-2020, 08:42 PM

Terry, can you take a look at these logs.
This is on e20, FF set at 60.
Attached Files
File Type: csv Map 6 e20 3rd gear.csv (9.8 KB, 6 views)
File Type: csv Map 6 e20.csv (20.3 KB, 6 views)
Reply With Quote
(#233)
Old
Dgvr6's Avatar
Dgvr6 Dgvr6 is offline
Junior Member
 
Posts: 37
Join Date: Apr 2020
Car: 2016 S6 and 2018 q50
Default Yesterday, 04:32 PM

Quote:
Originally Posted by Jdm010697
i recently installed the ewg connectors. i have already had the jb4 w/ fuel wires for a while now with no issues. however once i added the EWG connectors the car is pulling alot of timing during the pull. below i will post a 4th gear log that had terrible timing and a 3rd gear pull that had good timing. (both on same ewg setting) not sure if i should adjust any setting as they are how the forum said to start them

mods: ldp
muffler/res delete
heat X
Looks like youíre running two different maps on both logs.

Was that intentional? I can tell you that personally, the car Iím working on doesnít like all that boost on 93 only
Reply With Quote
(#234)
Old
Serstylz2's Avatar
Serstylz2 Serstylz2 is offline
Junior Member
 
Posts: 343
Join Date: Jan 2019
Car: 2019 Q50 Luxe
Default Yesterday, 04:58 PM

How did you calculate your e20 blend? My car also pulls timing with too much E


2019 Q50 Luxe RWD *JB4 with Bluetooth, Fuel Wires & EWG Connectors*BMS Intakes*AMS Downers*Frozen Boost 101*Megan Y Pipe*ADD W1 Oil Catch Can*HKS BOVs*275/40/19 Firehawk Indy 500s*
423 whp, 450 tq at 16.8psi with E30/JB4/FW/Intakes
12.64 @114mph
0-60 4.46
Reply With Quote
(#235)
Old
V@pors's Avatar
V@pors V@pors is offline
New Member
 
Posts: 21
Join Date: Jan 2019
Car: 2017 Infiniti Q60 RS AWD
Default Yesterday, 07:45 PM

Quote:
Originally Posted by Terry @ BMS
Boost seems lower than it should be. Do another log or two to evaluate.
Thank you. Will do.


2017 Q60 RS400 AWD Midnight Black/Monaco Red
AMS Cold Air Intake | AMS Heat Exchanger | AMS Coolant Expansion Tank
BMS JB4 w/Fuel & EWG Wires | Z1/HKS BOV kit | Fast Intentions catted FDP's | HKS Legamax CBE | Mishimoto OCC
Z1 2-piece rotors | HRE FF04 10x20" front 11x20" rear rims | Pirelli PZero PZ4 tires 265/35/20 x 305/30/20
Blackview DR750s-2CH camera system| Blackview Power Magic Pro
Reply With Quote
(#236)
Old
V@pors's Avatar
V@pors V@pors is offline
New Member
 
Posts: 21
Join Date: Jan 2019
Car: 2017 Infiniti Q60 RS AWD
Default Yesterday, 09:07 PM

Quote:
Originally Posted by Terry @ BMS
Boost seems lower than it should be. Do another log or two to evaluate.
I did 2 more logs on Map 1

Duty Bias = 50 (all)
PID = 20
FF = 60
Auto Shift = 60

91 octane

Thanks again
Attached Files
File Type: csv P50_M1_R2_200530_2029.csv (15.0 KB, 0 views)


2017 Q60 RS400 AWD Midnight Black/Monaco Red
AMS Cold Air Intake | AMS Heat Exchanger | AMS Coolant Expansion Tank
BMS JB4 w/Fuel & EWG Wires | Z1/HKS BOV kit | Fast Intentions catted FDP's | HKS Legamax CBE | Mishimoto OCC
Z1 2-piece rotors | HRE FF04 10x20" front 11x20" rear rims | Pirelli PZero PZ4 tires 265/35/20 x 305/30/20
Blackview DR750s-2CH camera system| Blackview Power Magic Pro
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright © 2007 - 2020, N54tech.com