[HanSolo71]

Hey team,

Everything for my 135i is installed and working on my 135i except the E85 sensor giving a 0% reading because I think the shop forgot power.

Anyway I put a full tank of 93 in since the sensor just reads 0% ethanol and went ahead test drove the car for 130 mile over the last 24 hours. Starting at 8lbs of boost and finally ending at 23lbs of boost I seem to have reached my fueling limit as I get kicked into the Low Pressure Fuel Pump safety after 24Lbs of boost.

Here is what is currently installed for these logs.

• JB4 MAP 6 @ 23Lbs FLAT
• High Flow *********
• RBTwo+ Turbos
• 2" Inlet and Outlets
• Turbosmart Diverter Valves
• 40MM Fan and Heatsink mod on the EKP
• JB4 Hybrid Flex Fuel BEF
• Fuel-IT E85 Sensor
• Fuel-IT Stage 2 525 pump
• 7.5" Intercooler
• Bosch 0242145541 @ .018"
• Eldor Coil Packs
• RB Upgraded PCV Valve
• High Side catch can
• xHP Stage 3 with line pressure boost

Pull in 3rd gear from 1500 to 7200ish

[Cannon @ BMS]

Start "Duty Bias" values at (50) and for each RPM box increase Duty Bias by +2.
Then upload a log. Thanks!