N54Tech.com - International Turbo Racing Discussion
(#1976)
Old
Aneurysn05 Aneurysn05 is offline
New Member
 
Posts: 9
Join Date: Dec 2012
Car: 335I
Default S55 JB4 - 05-06-2019, 04:12 PM

Quote:
Originally Posted by Terry @ BMS
Looks all normal to me for map2! Is the car flashed? If so set FUD.6 on.

Hello Terry, I've had JB4 on all my vehicles and now I purchased an F80 M3 2016. I've owned this M3 for a couple of years now, however, for some reason since I got my JB4 installed I find it runs much better with my map set to 0 (stock) than when my JB4 is active.

Being a JB4 customer for so long, I know there must be an issue with my configs.......

Attached you will find my latest logs. for some reasons, every time I enable my JB4, my car lags then goes from whatever map I had it on and into map 4 (safety).

Could you please review my logs and give me some recommendations. I would truly appreciate it.

I currently have fabspeed ********* installed.
Attached Files
File Type: csv 2019-05-06 16_40_44_Map-5.csv (3.9 KB, 10 views)
File Type: csv 2019-05-06 06_21_34_Map-2.csv (4.4 KB, 10 views)
File Type: csv 2019-05-06 16_35_48_Map-1.csv (6.7 KB, 12 views)
Reply With Quote
(#1977)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Tuner
 
Posts: 28,741
Join Date: Jan 2008
Default 05-06-2019, 07:15 PM

Looks like you mixed up the brown and rainbow TMAP connections during install. Fix that and relog map1.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#1978)
Old
Aneurysn05 Aneurysn05 is offline
New Member
 
Posts: 9
Join Date: Dec 2012
Car: 335I
Default 05-08-2019, 04:14 PM

Quote:
Originally Posted by Terry @ BMS
Looks like you mixed up the brown and rainbow TMAP connections during install. Fix that and relog map1.
THANK YOU TERRY!!! you were absolutely right. Mistake on my end during installation. Now i get proper readings. But may need skme further adjustments. no rush since youve helped enough already, but when you get a chance please review these logs and make any recommendations. thanks again.

Please note that i had to split the data into two files in order to upload. Split on line 175. Thanks.
Attached Files
File Type: xls 2019-05-08 06_13_28_Map-1 (1).xls (75.0 KB, 13 views)
File Type: xls 2019-05-08 06_13_28_Map-1 (2).xls (85.5 KB, 14 views)
Reply With Quote
(#1979)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Tuner
 
Posts: 28,741
Join Date: Jan 2008
Default 05-08-2019, 08:37 PM

Need the CSV files. Can't open excel files in the JB4 interface.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#1980)
Old
Aneurysn05 Aneurysn05 is offline
New Member
 
Posts: 9
Join Date: Dec 2012
Car: 335I
Default 05-09-2019, 05:14 AM

Quote:
Originally Posted by Terry @ BMS
Need the CSV files. Can't open excel files in the JB4 interface.
See attached
Attached Files
File Type: csv 2019-05-08 06_13_28_Map-1 (1).csv (42.0 KB, 11 views)
Reply With Quote
(#1981)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Tuner
 
Posts: 28,741
Join Date: Jan 2008
Default 05-09-2019, 03:29 PM

AFR is a bit strange, it's dumping in a lot of fuel. Trims are high for just map1. What fuel are you using?
Attached Images
 


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#1982)
Old
Aneurysn05 Aneurysn05 is offline
New Member
 
Posts: 9
Join Date: Dec 2012
Car: 335I
Default 05-09-2019, 05:49 PM

Quote:
Originally Posted by Terry @ BMS
AFR is a bit strange, it's dumping in a lot of fuel. Trims are high for just map1. What fuel are you using?
93
Reply With Quote
(#1983)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Tuner
 
Posts: 28,741
Join Date: Jan 2008
Default 05-09-2019, 09:51 PM

Let's see a log on map0 next.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#1984)
Old
Aneurysn05 Aneurysn05 is offline
New Member
 
Posts: 9
Join Date: Dec 2012
Car: 335I
Default 05-10-2019, 12:17 PM

Quote:
Originally Posted by Terry @ BMS
Let's see a log on map0 next.
Hello terry, i attached two runs on map 0
Attached Files
File Type: csv 2019-05-10 15_01_28_Map-0.csv (16.4 KB, 12 views)
File Type: csv 2019-05-10 14_49_48_Map-0.csv (14.5 KB, 9 views)
Reply With Quote
(#1985)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Tuner
 
Posts: 28,741
Join Date: Jan 2008
Default 05-10-2019, 01:33 PM

I can only really evaluate logs that are full throttle for fairly long length of time, like 40-90, 4th gear 2k to redline, etc. On a safe private track of course.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#1986)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Tuner
 
Posts: 28,741
Join Date: Jan 2008
Default 05-17-2019, 02:52 PM

Moved IC discussion here: Phoenix Racing S55 Intercooler - N54Tech.com - International Turbo Racing Discussion


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#1987)
Old
Aneurysn05 Aneurysn05 is offline
New Member
 
Posts: 9
Join Date: Dec 2012
Car: 335I
Default 05-18-2019, 10:41 AM

Quote:
Originally Posted by Terry @ BMS
I can only really evaluate logs that are full throttle for fairly long length of time, like 40-90, 4th gear 2k to redline, etc. On a safe private track of course.
Hello Terry, sorry I was traveling the past week. I did several runs. Please see attached.
Attached Files
File Type: csv 2019-05-18 13_09_59_Map-0.csv (8.9 KB, 8 views)
File Type: csv 2019-05-18 13_10_17_Map-0.csv (13.0 KB, 9 views)
File Type: csv 2019-05-18 13_11_01_Map-0.csv (16.8 KB, 7 views)
File Type: csv 2019-05-18 13_21_32_Map-1.csv (6.6 KB, 8 views)
File Type: csv 2019-05-18 13_21_48_Map-1.csv (8.9 KB, 11 views)
File Type: csv 2019-05-18 13_22_21_Map-1.csv (4.1 KB, 13 views)
Reply With Quote
(#1988)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Tuner
 
Posts: 28,741
Join Date: Jan 2008
Default 05-18-2019, 11:44 AM

Still not a lot of WOT but map1 looks more normal now, maybe just need some adaption runs.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#1989)
Old
Aneurysn05 Aneurysn05 is offline
New Member
 
Posts: 9
Join Date: Dec 2012
Car: 335I
Default 05-18-2019, 01:35 PM

Ok, thank you.
Reply With Quote
(#1990)
Old
narstune's Avatar
narstune narstune is offline
Junior Member
 
Posts: 97
Join Date: Mar 2014
Car: '11 E90 335i
Default 05-19-2019, 07:06 PM

Terry, would you happen to have the change notes for firmware 1_8_5_T5?


2017 M3 ZCP
Reply With Quote
(#1991)
Old
Dreebanqz Dreebanqz is offline
New Member
 
Posts: 15
Join Date: Apr 2018
Car: 14 bmw 335ix
Default 05-22-2019, 03:20 AM

are these still the same setting?
Reply With Quote
(#1992)
Old
Aneurysn05 Aneurysn05 is offline
New Member
 
Posts: 9
Join Date: Dec 2012
Car: 335I
Default 05-22-2019, 04:57 AM

Any release notes for firmware 1_8_5_T5?
Reply With Quote
(#1993)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Tuner
 
Posts: 28,741
Join Date: Jan 2008
Default 05-22-2019, 09:03 AM

Haven't released any notes on it, just some minor changes.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#1994)
Old
Aneurysn05 Aneurysn05 is offline
New Member
 
Posts: 9
Join Date: Dec 2012
Car: 335I
Default 05-22-2019, 05:59 PM

Quote:
Originally Posted by Terry @ BMS
Haven't released any notes on it, just some minor changes.
I suppose its safe to move to the latest firmware. if so, I will make my changes tomorrow. Thanks again for your prompt responses.
Reply With Quote
(#1995)
Old
lazycat lazycat is offline
Junior Member
 
Posts: 80
Join Date: Jan 2013
Car: f30 335i
Default 06-12-2019, 02:07 AM

Ive been using the latest firmware 1 8 5. Seems the same as before, what changes?


2017 F80 M3 Competition Package. JB4, BMS Stealth Meth kit with dual CM5. ESS charge pipe. RKtunes post intercooler meth injection. Stock exhaust with 2ndcat delete
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2018, N54tech.com