N54Tech.com - International Turbo Racing Discussion
(#1)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 28,710
Join Date: Jan 2008
Default 2016 328i Dyno w/ JB Plus - 11-09-2016, 03:18 PM

Hey guys,

Dropped off our 340 for its scheduled oil change and took home a 328 loaner... So of course I drove it straight to the dyno for some stock and JB Plus quick install dyno testing.

Added a gallon of 100 octane there to 5 gallons of 91 to simulate 93 octane. JB Plus was run at the default +3.5psi setting in 5th gear.

Results were impressive for $199 and a 20 second install.
Attached Images
  


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#2)
Old
Mike_L's Avatar
Mike_L Mike_L is offline
Anti-Social
 
Posts: 1,737
Join Date: Jun 2014
Car: 2017 X3 xDrive35i
Default 11-09-2016, 04:15 PM

Thats an N26, right? IIRC the N20 has better catalyst, so it may have bigger gains.


Mike Levy
2017 X3 xDrive35i
2000 F150 Lightning
2018 Equinox LT 2.0T
Reply With Quote
(#3)
Old
Nanometer Nanometer is offline
Senior Member
 
Posts: 591
Join Date: Jan 2014
Car: 335i, 2009
Default 11-09-2016, 04:43 PM

Haha! way to take advantage of a loaner =) Very impressive for a tiny 4 banger!


335i E90 2009 ///M Sport Auto
Mods: | Wagner Intercooler | MeowPipe | Meth-Trunk | JB4 | Pump_Back_End_Flash | Fuel-it! Stage 2
Drivetrain--------ForgeStar F14 Wheels 18" (245 & 275 PS4) | XHP L3 Transmission Flash | Wavetrac LSD
Suspension-------KW V3 Coil Overs| M3 RSF Bushings and Dif Bushings | H&R Sways


X5 50i 2013 ///M Sport
BMS Stage 1

Reply With Quote
(#4)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 28,710
Join Date: Jan 2008
Default 11-09-2016, 06:51 PM

N26 as far as I know.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#5)
Old
Ando @ BMS's Avatar
Ando @ BMS Ando @ BMS is offline
BMS Customer Service
 
Posts: 733
Join Date: Jan 2013
Car: bmw 335i
Default 11-09-2016, 09:55 PM

Awesome! Great idea!


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2018, N54tech.com