[Monoid]

Hey guys i own F30 N55 EWG and i have the following problem with my Electronic Wastegate.

I swaped the stock turbo with cutom fitted GTX3071 with cutom made manifold. After the turbo swap i tried to setup the correct postion of the wastegate actuator but from time to time i have limp mode with following message *wastegste out of tolerance* Also the car is a little laggy i have full boost on 3300rpm witch means that probably the gate is not closed fully and it’s stuck open. My question is that is there anyway so i can set the correct position and how to do it if it’s possible. I saw the big boost kit has a manual how to set the correct position for ewg but probably it won’t be a solution for me because they use different linkage on their turbo. Please give me some advice how to fix this stupid issue.

[RVA_N55_Fan]

a mechanical adjustment aided by using the ISTA+ diagnostic tool