 |
|
|
 |
Tuner
|
|
Posts: 34,180
Join Date: Jan 2008
|
|

02-06-2019, 01:35 PM
Found a bug in the firmware causing a false alarm IAT/boost sensor fault. Will add new firmware to the first post shortly that corrects it for anyone getting it.
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
 |
Tuner
|
|
Posts: 34,180
Join Date: Jan 2008
|
|

02-23-2019, 03:00 PM
JB4_ALFA_2:
1) Enabled CANbus engine allow the JB4 to now access the full suite of engine data including engine speed, ignition advance, air/fuel ratio, fuel trims, throttle & pedal position, engine temperatures, fuel pressure, and more. Requires OBDII cable to be attached to JB4. See install video below.
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
 |
Super Moderator
|
|
Posts: 6,305
Join Date: Oct 2013
Car: e90 335i
|
|

02-23-2019, 11:06 PM
Awesome work Terry!!
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
 |
Tuner
|
|
Posts: 34,180
Join Date: Jan 2008
|
|

02-24-2019, 10:20 AM
A couple Alfa logs stock and JB4 map2. 
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
New Member
|
|
Posts: 1
Join Date: Mar 2019
Car: Alfa Romeo Guilia
|
|

03-07-2019, 01:38 PM
Any Dyno numbers yet?
|
 |
Tuner
|
|
Posts: 34,180
Join Date: Jan 2008
|
|

03-07-2019, 04:26 PM
No dyno numbers yet.
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
New Member
|
|
Posts: 14
Join Date: Jan 2017
Car: 535
|
|
Giulia 2.0 -
03-13-2019, 01:58 PM
Attached some logs from last night.
|
 |
Tuner
|
|
Posts: 34,180
Join Date: Jan 2008
|
|

03-13-2019, 06:14 PM
Thanks! Keep those logs rolling. Specially from different climates and fuels. 
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
New Member
|
|
Posts: 14
Join Date: Jan 2017
Car: 535
|
|

03-14-2019, 06:59 AM
You got it! That was on standard, 'Bama 93 pump gas. RTR!
|
New Member
|
|
Posts: 14
Join Date: Jan 2017
Car: 535
|
|

03-17-2019, 10:14 AM
Air temp, 58f. Half tank of 93... Best 0-60 was a 4.8. I was traction limited on most of these logs when either getting to the top of first, or shifting to second. Also had slip issues in first when the boost really came on... for science...
|
 |
Tuner
|
|
Posts: 34,180
Join Date: Jan 2008
|
|

03-17-2019, 11:08 AM
Set 1st gear to 3psi to reduce boost down low by 3psi and see if that helps the launch!
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
New Member
|
|
Posts: 14
Join Date: Jan 2017
Car: 535
|
|

03-17-2019, 05:05 PM
Quote:
Originally Posted by Terry @ BMS
Set 1st gear to 3psi to reduce boost down low by 3psi and see if that helps the launch!
|
Ok. Let me do some research on that one...
|
New Member
|
|
Posts: 6
Join Date: Mar 2019
Car: Alfa Romeo Giulia
|
|

03-17-2019, 05:42 PM
1st photo is from a dead stop and second is from a 30 roll
|
New Member
|
|
Posts: 3
Join Date: Mar 2019
Car: Alfa Romeo Giulia
|
|
Jb4 Giulia -
03-18-2019, 07:34 AM
Hi I’m wanting to get the JB4 for my car and I was wondering if the software is finilized or are you still beta testing it. Also is the only parameter being affected by the jb4 the boost pressure? How about fuel and timing? If I remove it will the dealer see any trace when I take it in for service since it connects to the obd2
|
 |
Tuner
|
|
Posts: 34,180
Join Date: Jan 2008
|
|

03-18-2019, 09:12 AM
Boost, timing, and fueling are manipulated, and you can confirm everything is healthy by running your own data logs.
The hardware itself is finalized but we will be doing regular software updates to add more power and features as continued development dictates.
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
New Member
|
|
Posts: 14
Join Date: Jan 2017
Car: 535
|
|

03-18-2019, 01:52 PM
40-90...
|
New Member
|
|
Posts: 3
Join Date: Mar 2019
Car: Alfa Romeo Giulia
|
|

03-18-2019, 02:00 PM
Ok sounds good, did you run any dyno pulls yet to see the difference in hp and trq. And how about when I bring the car in for service?
|
New Member
|
|
Posts: 13
Join Date: Mar 2019
Car: Alfa Romeo Giulia 2.0 Q4
|
|

03-18-2019, 03:26 PM
I've been inspired to try a 0-60 run in my Q4 on Map 2.... I did cheat a bit because it's cold out
 4.625 sec according to the app 
|
New Member
|
|
Posts: 14
Join Date: Jan 2017
Car: 535
|
|

03-18-2019, 03:31 PM
Nice job, man! Traction has its benefits...
|
New Member
|
|
Posts: 13
Join Date: Mar 2019
Car: Alfa Romeo Giulia 2.0 Q4
|
|

03-18-2019, 03:59 PM
Coming from RWD manual transmission cars - that run felt like cheating 
|
New Member
|
|
Posts: 14
Join Date: Jan 2017
Car: 535
|
|

03-18-2019, 04:33 PM
Nah... You're just evolving...
|
 |
Tuner
|
|
Posts: 34,180
Join Date: Jan 2008
|
|

03-18-2019, 07:09 PM
Quote:
Originally Posted by Alpha
I've been inspired to try a 0-60 run in my Q4 on Map 2.... I did cheat a bit because it's cold out
 4.625 sec according to the app 
|
Looks good to me!
Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
New Member
|
|
Posts: 5
Join Date: Mar 2019
Car: 2018 Alfa Romeo Giulia Ti Sport
|
|

03-20-2019, 08:55 PM
Hey just finished installing my jb4 a couple hours ago. I was kinda upset at first because i thought i ordered the wireless mobile kit but instead just the basic wire but it’s all good now, just ordered the mobile kit and the ride just in map 1 is a lot of fun. One issue (or maybe good thing) i ran into and the main purpose of this post is that upon first start up i got a light telling me that start stop is unavailable and it has not gone away since. Any idea what might be causing this? I personally never use this function anyway but the light on the dash is a bit annoying. Thanks!
|
New Member
|
|
Posts: 14
Join Date: Jan 2017
Car: 535
|
|

03-21-2019, 01:45 PM
What firmware do you have?
|
 |
Super Moderator
|
|
Posts: 6,305
Join Date: Oct 2013
Car: e90 335i
|
|

03-21-2019, 05:40 PM
Quote:
Originally Posted by termOTB
Hey just finished installing my jb4 a couple hours ago. I was kinda upset at first because i thought i ordered the wireless mobile kit but instead just the basic wire but it’s all good now, just ordered the mobile kit and the ride just in map 1 is a lot of fun. One issue (or maybe good thing) i ran into and the main purpose of this post is that upon first start up i got a light telling me that start stop is unavailable and it has not gone away since. Any idea what might be causing this? I personally never use this function anyway but the light on the dash is a bit annoying. Thanks!
|
Got any logs so we can take a look at firmware or anything unusual?
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Copyright © 2007 - 2022, JB4tech.com
|