N54Tech.com - International Turbo Racing Discussion
(#1)
Old
blowoff blowoff is offline
New Member
 
Posts: 10
Join Date: Oct 2019
Car: AMG S205 C63s
Default AMG S205 C63s JB4 Logs Check - 10-17-2019, 07:00 PM

Hi Guys, Car is a AMG S205 (Estate) C63s. Mods are ECU Tune, down pipe(s), JB4 and BMS Intake with R888R Rubber. 295/30/19 on a 11" Rim
FUEL, Ran 98 with 15 liters of E85, Australian Spec
Have to Dyno it again and run it down the 1/4 !
Feels like there might be a high 10 in it on a well prepped track..
Logs attached... Map O to 3 in order.
What you think...?
Attached Images
   
Attached Files
File Type: csv 2019-10-18 10_09_42_Map-0.csv (14.9 KB, 11 views)
File Type: csv 2019-10-18 10_12_26_Map-1.csv (12.0 KB, 12 views)
File Type: csv 2019-10-18 10_13_55_Map-2.csv (9.4 KB, 10 views)
File Type: csv 2019-10-18 10_15_44_Map-3.csv (8.0 KB, 11 views)
File Type: csv 2019-10-18 10_49_55_Map-5.csv (5.2 KB, 12 views)
Reply With Quote
(#2)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Tuner
 
Posts: 30,033
Join Date: Jan 2008
Default 10-18-2019, 08:15 AM

I don't see any issues here. Will be interesting to see if the higher maps gain any power on the dyno vs. the lower ones. Often for flashed cars a unique map6 winds up being the best option.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#3)
Old
blowoff blowoff is offline
New Member
 
Posts: 10
Join Date: Oct 2019
Car: AMG S205 C63s
Default 10-21-2019, 02:09 AM

Went up to 40% E85 Blend with 98 octane and have the fuel pump and trims working hard BUT the good thing is the ecu has placed a fair bit of timing into it. Feels strong ! Think this is the max with the current setup available...
Maps 1 to 5 Below
Attached Images
     

Last edited by blowoff; 10-21-2019 at 12:56 PM..
Reply With Quote
(#4)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 5,420
Join Date: Oct 2013
Car: e90 335i
Default 10-21-2019, 10:50 AM

Quote:
Originally Posted by blowoff
Went up to 40% E85 Blend with 98 octane and have the fuel pump and trims working hard BUT the good thing is the ecu has placed a fair but of timing into it. Feels strong ! Think this is the max with the current setup available...
Maps 1 to 5 Below
Post the CSV!


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#5)
Old
blowoff blowoff is offline
New Member
 
Posts: 10
Join Date: Oct 2019
Car: AMG S205 C63s
Default 10-21-2019, 12:58 PM

Here you go.
Attached Files
File Type: csv 2019-10-20 08_38_02_Map-1.csv (7.9 KB, 11 views)
File Type: csv 2019-10-20 08_38_53_Map-2.csv (7.7 KB, 10 views)
File Type: csv 2019-10-20 08_39_57_Map-3.csv (12.0 KB, 9 views)
File Type: csv 2019-10-20 08_41_07_Map-4.csv (14.8 KB, 9 views)
File Type: csv 2019-10-20 08_41_58_Map-5.csv (10.5 KB, 12 views)
File Type: csv 2019-10-20 08_43_10_Map-5.csv (9.6 KB, 8 views)
Reply With Quote
(#6)
Old
blowoff blowoff is offline
New Member
 
Posts: 10
Join Date: Oct 2019
Car: AMG S205 C63s
Default 10-22-2019, 11:18 PM

bump
Reply With Quote
(#7)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 5,420
Join Date: Oct 2013
Car: e90 335i
Default 10-29-2019, 10:06 AM

Quote:
Originally Posted by blowoff
bump
Looks good for map 5. I'd raise Fuel open loop to 35 and get another log.
Maybe lower ethanol content to e30 too.
Attached Images
 


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#8)
Old
blowoff blowoff is offline
New Member
 
Posts: 10
Join Date: Oct 2019
Car: AMG S205 C63s
Default 11-04-2019, 10:34 PM

how do you raise the Fuel open loop on fixed maps (1 to 5)...
and why lower the ethanol ?
Reply With Quote
(#9)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 5,420
Join Date: Oct 2013
Car: e90 335i
Default 11-05-2019, 12:32 PM

Quote:
Originally Posted by blowoff
how do you raise the Fuel open loop on fixed maps (1 to 5)...
and why lower the ethanol ?
Fuel trims are maxed out, so you'll need to lower ethanol content by a little bit.

Go to user adjustment tab and scroll down to Fuel open loop. Enter the value, click save and go get another log


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#10)
Old
blowoff blowoff is offline
New Member
 
Posts: 10
Join Date: Oct 2019
Car: AMG S205 C63s
Default 11-05-2019, 03:24 PM

Using the App can ONLY change map 6 what about the other Maps.. ?
Reply With Quote
(#11)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Tuner
 
Posts: 30,033
Join Date: Jan 2008
Default 11-06-2019, 03:36 PM

Looks like Payam has it under control.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#12)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 5,420
Join Date: Oct 2013
Car: e90 335i
Default 11-07-2019, 10:21 AM

Quote:
Originally Posted by blowoff
Using the App can ONLY change map 6 what about the other Maps.. ?
You should be able to toggle through all these maps:

Mercedes AMG C63 C63S JB4 - N54Tech.com - International Turbo Racing Discussion

Map Guide as of V2 Firmware:
Map 0: Stock operation, JB4 disabled
Map 1: Default performance map, 4psi peak over stock, taper to redline
Map 2: 5psi peak over stock, taper to redline
Map 3: 6psi peak over stock, less taper to redline, suggested for E85 mixture or octane booster
Map 4: 6.5psi peak boost request over stock, less taper to redline, requires unleaded racing fuel or E85 mixture
Map 5: 7psi peak request over stock, less taper to redline, requires unleaded racing fuel or E85 mixture
Map 6: Custom additive boost profile, boost request over stock
Map 7: Progressive WMI (water/meth) mapping based on boost additive setting and WMI flow
Map 8: Low boost VALET / Safety map


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#13)
Old
blowoff blowoff is offline
New Member
 
Posts: 10
Join Date: Oct 2019
Car: AMG S205 C63s
Default 11-07-2019, 11:44 AM

Your post does not answer my question.
Using the App can ONLY change map 6 what about the other Maps.. ?
Reply With Quote
(#14)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 5,420
Join Date: Oct 2013
Car: e90 335i
Default 11-07-2019, 01:17 PM

Quote:
Originally Posted by blowoff
Your post does not answer my question.
Using the App can ONLY change map 6 what about the other Maps.. ?
If your question is means is map 6 the only customizable map, then yes.
All other maps are preloaded and can't be changed. Hence the list I gave you earlier in the other post


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#15)
Old
blowoff blowoff is offline
New Member
 
Posts: 10
Join Date: Oct 2019
Car: AMG S205 C63s
Default 11-07-2019, 02:20 PM

OK. Thx
Please provide the pre loaded info of MAP 5 so can transfer this over to Map 6 with the change of the open fuel loop you suggested.
Reply With Quote
(#16)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 5,420
Join Date: Oct 2013
Car: e90 335i
Default 11-07-2019, 02:36 PM

Quote:
Originally Posted by blowoff
OK. Thx
Please provide the pre loaded info of MAP 5 so can transfer this over to Map 6 with the change of the open fuel loop you suggested.
You don't need to use map 6. Use map 5, and change the fuel open loop value.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#17)
Old
blowoff blowoff is offline
New Member
 
Posts: 10
Join Date: Oct 2019
Car: AMG S205 C63s
Default 11-07-2019, 07:43 PM

Quote:
Originally Posted by Payam @ BMS
If your question is means is map 6 the only customizable map, then yes.
All other maps are preloaded and can't be changed. Hence the list I gave you earlier in the other post
Why are we going around in circles !
Read your above post.

You said no changes to other maps excluding 6.
Now you say change 5 which cannot to done. WTF !
Reply With Quote
(#18)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 5,420
Join Date: Oct 2013
Car: e90 335i
Default 11-08-2019, 12:30 PM

Quote:
Originally Posted by blowoff
Why are we going around in circles !
Read your above post.

You said no changes to other maps excluding 6.
Now you say change 5 which cannot to done. WTF !
I'm talking about boost levels only. Sorry for the misunderstanding.

All other values can be changed and will be specifically saved for each map.

Stay on map 5. Adjust fuel open loop value under settings when connected to the car, click save.
Get another log so we can evaluate.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#19)
Old
blowoff blowoff is offline
New Member
 
Posts: 10
Join Date: Oct 2019
Car: AMG S205 C63s
Default 12-01-2019, 07:57 PM

Sorted the adjustment to FOL at 35.
How do these logs look, FYI am running only 25% E85 prior was 40%.
I think add up to the 40% and re log...

2019-12-02 09_47_30_Map-4.csv

2019-12-02 09_49_14_Map-5.csv
Reply With Quote
(#20)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 5,420
Join Date: Oct 2013
Car: e90 335i
Default 12-02-2019, 12:53 PM

Quote:
Originally Posted by blowoff
Sorted the adjustment to FOL at 35.
How do these logs look, FYI am running only 25% E85 prior was 40%.
I think add up to the 40% and re log...

Attachment 91527

Attachment 91528
Looks good to me, got any more on map 5?
Attached Images
 


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2019, N54tech.com