View Single Post
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Posts: 32,354
Join Date: Jan 2008
Default 04-18-2019, 11:59 AM

Added updated v12 JB4 firmware to the first post. Main change is pulling in fuel pressure information via CANbus. Fuel pressure information coming off the fuel pressure sensor for those equipped will show under FP_L as there isn't a low fuel pressure sensor on the vehicle from the factory.

Could use a few logs to ensure it's properly calibrated, etc. After updating hte firmware you'll need to lock the doors and wait a few min for the ECU to reset for FP_H to show up properly.

Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote