View Single Post
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is online now
Posts: 31,759
Join Date: Jan 2008
Default 08-31-2018, 04:21 PM

I see. Firmware looks OK.

Also noticed on map2 without CANbus we set it to default to 1psi. I'll change that to 5psi.

As a quick test with engine running, press the prime button a couple times on the WMI page in the app, and see if that gets CANbus active. We have a reset CANbus in there combined with the purge mode.

Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote