View Single Post
(#1)
Old
TrapHouse TrapHouse is offline
New Member
 
Posts: 19
Join Date: Jul 2019
Car: Z4 sDrive35i
Default Problems after installing turbos - 03-26-2021, 06:41 PM

Recently installed 17Tís
I replaced the thermostat, water pump & HPFP
Also installed stage 2 LPFP
PR coils and 2 step colder plugs were installed around 1k miles ago
Car fired up the first time fine and was running fine. Did some runs and wasnít hitting target. Went into limp mode and threw a check engine light.
CDA6 , 2E83 codes
I deleted codes and restarted the car. It started with a very rough idle and would stall if I didnít give it gas. The fan was also on full blast. And it Threw more codes - 2B2C and 29dc

Z4 35i running Jb4 and e85 pi hybrid BEF

Attached a short log
Attached Files
File Type: csv 20210325_222543_runs(1).csv (18.6 KB, 79 views)
Reply With Quote