View Single Post
Wedge1967's Avatar
Wedge1967 Wedge1967 is offline
Junior Member
Posts: 356
Join Date: Apr 2012
Car: '07 335i e92
Default 04-08-2015, 06:47 AM

Originally Posted by AWSAWS
I'm always glad to hear something like this! I have a DCT car with under 40k on the clock. Hoping it's still solid. Only 8k miles with a JB4 and *** on it.
Be careful with running extra boost without a good supporting DME flash for the DCT. Torque Output is a calculation of load / rpm on the Load To Torque table. LOAD is how the DME calculates power, not just in boost. Running higher boost with the JB4 doesn't allow the DME to see the actual LOAD and your DCT will not have the correct calibrations to hold the power as internal line pressure is increased based on reported Torque Output. I'm not saying your current setup won't work, but I just want to make sure you are using a higher load map which I think Terry has addressed with the newer rom versions.
Reply With Quote