View Single Post
(#9)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 32,900
Join Date: Jan 2008
Default 05-03-2019, 08:33 AM

Adjusted v9 firmware so fuel pressure, water temp, and road speed appear in the logging. Previously they were missing.

FF, duty bias, pid gain, not active yet. They related to electronic wastegate control.

On fuel bias it's not active anyway unless manually adjusting fuel offsetting and that is only done to lean the mixture out, not richen it up. Lean spool logic is built in to the ECU and perfectly normal. Expect to see AFR readings in the 16s for a moment due to lean spool mode and as sensor reading catches up.


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote