View Single Post
(#8)
Old
lfelunden's Avatar
lfelunden lfelunden is offline
Junior Member
 
Posts: 218
Join Date: Jun 2011
Car: 335i e92
Default 06-13-2015, 03:40 PM

Quote:
Originally Posted by Terry @ BMS
If you care to cut/solder a wire in the harness then that's fine for fuel pressure. On the test car we just run a PNP connector to the sensor itself. It's just hard to reach. So much so I would not expect the average consumer to bother with it. With meth flowing anyway it's not needed for OEM turbos. MAF is useless to intercept. We just read it via CANbus.
The good thing here is that you won't need as much adaption vs no control of the fuelpressure. I can do that, if you have some pictures and maybe a PNP connector, I bother doing that! No problem for me BMW mechanics will do that with ease I suppose.

I can email you if this is possible.
Reply With Quote