View Single Post
KillerBeeAirsoft's Avatar
KillerBeeAirsoft KillerBeeAirsoft is offline
New Member
Posts: 26
Join Date: Dec 2020
Car: 20' G70 3.3T
Default 08-21-2021, 08:07 AM

It’s fairly easy hookup. If your using the stock intercooler, you will need a 1/4 npt bit to make the hole for the injector for the charge pipe. (Passenger side) .
You can follow the diagram on the top of the thread. Also for the FSB controller, same instructions for the water/meth kit.
Only thing you have to usu caution with it the tapping of injector and making sure the pins are in the correct spot.
Reply With Quote