Thread: HPFP swap
View Single Post
(#3)
Old
T_H_O_M_A_S T_H_O_M_A_S is offline
Junior Member
 
Posts: 150
Join Date: Oct 2017
Car: M135ix
Default 02-28-2019, 04:37 PM

you have to cut off the flange on one side and make new holes as seen on the pictures , you also need a different connector, the oem connector has a red and white wire , the evo pump's connector has a white and a white striped wire . connect white to white and red to white striped . my car started right up after i bolted everything back together . the difference is shown in the screenshots
partno for the pump : 13517642466
partno for the connector 12518638006


M135i PWG , FBO , PS2 , LPFP st2 , HDP6 custom for N55 , wedge MHD mapping , XHP AT8
Reply With Quote